Hearing Aids

This chapter presents an overview of the current state of a hearing aid tracing back through the history. The hearing aid, which was just a sound collector in the sixteenth century, has continued to develop until the current digital hearing aid for realizing the downsizing and digital signal processing, and this is the age of implanted hearing devices. However, currently popular implanted hearing devices are a fairly large burden for people soon after they become aware of their hearing loss, although auditory stimulation to the nerve in the early stage can avoid accelerated cognitive decline and an increased risk of incident all-cause dementia. For this reason, we tend to stick to wearable hearing aids that are easy to be put on and take off. Although the digital hearing aid has already reached the technical ceiling, the noninvasive hearing aids have some severe problems that are yet to be resolved. In the second half of this chapter, we discuss the scientific and technical solutions to broaden the range of permissible users of hearing aids

Microsystems technology: objectives

This contribution focuses on the objectives of microsystems technology (MST). The reason for this is two fold. First of all, it should explain what MST actually is. This question is often posed and a simple answer is lacking, as a consequence of the diversity of subjects that are perceived as MST. The second reason is that a map of the somewhat chaotic field of MST is needed to identify sub-territories, for which standardization in terms of system modules an interconnections is feasible. To define the objectives a pragmatic approach has been followed. From the literature a selection of topics has been chosen and collected that are perceived as belonging to the field of MST by a large community of workers in the field (more than 250 references). In this way an overview has been created with `applications¿ and `generic issues¿ as the main characteristics

Selective Intervention and Internal HybridsInterpreting and Learning from the Rise and Decline of the Oticon Spaghetti Organization

Infusing hierarchies with elements of market control has become a much-used way of simultaneously increasing entrepreneurialism and motivation in firms. However, this paper argues that such “internal hybrids,” particularly in their radical forms, are inherently hard to successfully design and implement, because of fundamental credibility problems related to managerial promises to not intervene in delegated decision-making ¾ an incentive problem that is often referred to as the “problem of selective intervention.” This theoretical theme is developed and illustrated, using the case of the world-leading Danish hearing aids producer, Oticon. In the beginning of the 1990s, Oticon became famous for its radical internal hybrid, the ”spaghetti organization.” Recent work has interpreted the spaghetti organization as a radical attempt to foster dynamic capabilities by imposing loose coupling on the organization, neglecting, however, that about a decade later, the spaghetti organization has given way to a more traditional matrix organization. This paper presents an organizational economics interpretation of organizational changes in Oticon, and argues that a strong liability of the spaghetti organization was the above incentive problem. Motivation in Oticon was strongly harmed by selective intervention on the part of top-management Changing the organizational structure was one means of repairing these motivational problems. Refutable implications are developed, both for the understanding of efficient design of internal hybrids, and for the more general issue of the distinction between firms and markets, as well as the choice between internal and external hybrids.Internal hybrids, organizational change, delegation, managerial commitment problems, new organizational forms

National MEMS Technology Roadmap - Markets, Applications and Devices

MEMS teknologiaa on jo pitkään käytetty lukuisien eri laitteiden valmistamiseen. Osa näistä laitteista on ollut markkinoilla jo useita vuosia, kun taas osa on vasta kehitysvaiheessa. Jotta tutkimus ja kehitystyötä osattaisiin jatkossa kohdistaa oikeille painopistealueille, on tärkeää tietää mihin suuntaan kehitys on menossa. Tämä työ on osa kansallista MEMS teknologioiden tiekartta -projektia ja sen tavoitteena oli selvittää MEMS laitteiden kehityksen suuntaa. Työ toteutettiin laajana kirjallisuustutkimuksena. Lisäksi tulosten tueksi haastateltiin asiantuntijoita Suomen MEMS teollisuudesta. Työssä tarkasteltiin lukuisia jo markkinoilta löytyviä ja vasta kehitteillä olevia MEMS laitteita ja analysoitiin niitä sekä teknisestä että kaupallisesta näkökulmasta. Tutkimuksen perusteella kävi ilmi, että MEMS markkinat ovat pitkään muodostuneet vakiintuneista laitteista kuten mustesuihkupäistä, kiihtyvyysantureista, paineantureista sekä RF suotimista. Lisäksi mikrofonit, gyroskoopit ja optiset laitteet ovat olleet kaupallisesti saatavilla jo pitkään. Markkinat ovat hiljattain alkaneet tehdä tilaa myös uusille MEMS laitteille, joita tulee ulos nopeaa vauhtia. Viimeisimpänä markkinoille tulleita laitteita ovat erilaiset mikrofluidistiikka laitteet, mikrobolometrit sekä yhdistelmäanturit. Pian kaupallisesti saatavia laitteita ovat magnetometrit, automaattitarkennuslaitteet sekä MEMS oskillaattorit. Näiden laitteiden lisäksi kehitteillä on monia uusia MEMS laitteita, jotka saattavat tarjota merkittäviä mahdollisuuksia tulevaisuudessa. Kehitteillä olevia laitteita ovat erilaiset lääketieteelliset laitteet, atomikellot, mikrojäähdyttimet, mikrokaiuttimet, energiantuottolaitteet sekä RFID-laitteet. Kaikki kehitteillä olevista laitteista eivät välttämättä tule menestymään kaupallisesti, mutta jatkuva tutkimustyö osoittaa, että monilla MEMS laitteilla on potentiaalia useissa eri sovelluksissa. Markkinanäkökulmasta tarkasteltuna suurin potentiaali piilee kuluttajaelektroniikka markkinoilla. Muita tulevaisuuden kannalta potentiaalisia markkinoita ovat lääketieteelliset ja teollisuusmarkkinat. Tutkimus osoitti että MEMS laitteiden tutkimukseen ja kehitykseen liittyy monia potentiaalisia painopistealueita tulevaisuudessa. Käyttömahdollisuuksien parantamiseksi monet jo vakiintuneet laitteet kaipaavat vielä parannuksia. Toisaalta, jo olemassa olevia laitteita voidaan hyödyntää uusissa sovelluksissa. Lisäksi monet uusista ja kehitteillä olevista MEMS laitteista vaativat vielä kehitystyötä.MEMS technology has long been applied to the fabrication of various devices from which some have already been in use for several years, whereas others are still under development. In order to find future focus areas in research and development activities in the industry, it is important to know where the development is going. This thesis was conducted as a part of National MEMS technology roadmap, and it aimed for determining the evolution of MEMS devices. The work was conducted as an extensive literature review. In addition, experts from the Finnish MEMS industry were interviewed in order obtain a broader insight to the results. In this thesis various existing and emerging MEMS devices were reviewed and analyzed from technological and commercial perspectives. The study showed that the MEMS market has long been composed of established devices, such as inkjet print-heads, pressure sensors, accelerometers and RF filters. Also gyroscopes, microphones and optical MEMS devices have already been on the market for a long time. Lately, many new devices have started to find their place in the markets. The most recently introduced commercial devices include microfluidic devices, micro bolometers, and combo sensors. There are also a few devices including magnetometers, MEMS oscillators, and auto-focus devices that are currently crossing the gap from R&D to commercialization. In addition to the already available devices, many new MEMS devices are under development, and might offer significant opportunities in the future. These emerging devices include various bioMEMS devices, atomic clocks, micro-coolers, micro speakers, power MEMS devices, and RFID devices. All of the emerging devices might not find commercial success, but the constant stream shows, that there are numerous applications, where MEMS devices could be applied in. From a market point of view, the greatest potential in the future lies in consumer electronics market. Other highly potential markets include medical and industrial markets. The results of the thesis indicate that there are many potential focus areas in the future related to MEMS devices, including improvements of the existing devices in order to gain better utilization, application of the existing devices in new areas, and development work among the emerging devices

The wearable co-design domino: A user-centered methodology to co-design and co-evaluate wearables

This paper presents a user-centered methodology to co-design and co-evaluate wearables that has been developed following a research-through design methodology. It has been based on the principles of human–computer interaction and on an empirical case entitled “Design and Development of a Low-Cost Wearable Glove to Track Forces Exerted by Workers in Car Assembly Lines” published in Sensors. Insights from both studies have been used to develop the wearable co-design domino presented in this study. The methodology consists of different design stages composed of an ideation stage, digital service development and test stages, hardware development and test stage, and a final test stage. The main conclusions state that it is necessary to maintain a close relationship between human factors and technical factors when designing wearable. Additionally, through the several studies, it has been concluded that there is need of different field experts that should co-design and co-evaluate wearable iteratively and involving users from the beginning of the process

Technical Paper Session II - Cochlear Implant Technology

This paper will provide a brief history and description of the Cochlear Implant, including early research, development, experimentation, and implementation of the implant plus the names of many of the most renowned developers and producers. research subsequent to the experience of personal hearing loss onset in the Early 1970s, deriving design of basic specifications for simulation of the electronic functioning of the inner ear (Cochlea) in humans. Kissiah’s subsequent award of Patent (4,063,048, December 13, 1977) accomplished through the Kennedy Space Center’s Technology Commercialization Program and Patent Counsel, James O. Harrell, Esq. Third: How our natural hearing mechanism works, and how the Cochlear implant works in the correction of hearing loss. Fourth: Information regarding implant availability including manufacturers, costs, clinics, surgical aspects, and post-operative activation (therapy) considerations. Fifth: Sources for additional information

Design and fabrication of an air-bridge microphone

Today\u27s hearing aids have many shortcomings: they are susceptible to environmental damage, cannot be worn while sleeping or in wet environments, are obtrusive and are expensive. New technologies are being developed which allow most all of these shortcomings to be addressed by placing a portion of the hearing aid within the middle ear. These new technologies require size reductions in several of the aid components, one of these being the microphone. Microelectromechanical Systems (MEMS) has already developed technologies that can be used to construct these microphones. Most microphones constructed using MEMS techniques employ a dual wafer design. the microphone membrane is constructed on one wafer and attached to a second wafer containing bonding pads and possibly additional sensing elements. The use of two wafers to manufacture one microphone reduces the yield of the process and requires an additional alignment and bonding step. Further, the methods used for fabrication are non-traditional and do not allow appropriate electronics to be easily fabricated with the microphone. An alternative approach is being investigated by this thesis. Here a single wafer and standard microelectronic processing techniques are used to fabricate the diaphragm, sensing elements and bonding pads. This approach will simplify construc tion and allow the possibility of including appropriate signal processing electronics on the microphone die. Equations are developed to predict the static and dynamic deflec tion and natural frequency of the microphone system. Optimal design strategies are used to minimize the microphone diaphragm area subject to electrical and mechanical constraints. A first generation microphone was fabricated. However, unanticipated processing constraints on the microphone design rendered the microphones inoperable. Several design modifications are noted to solve these problems and promote the successful fabrication of second generation microphones