Metastability-Containing Circuits

In digital circuits, metastability can cause deteriorated signals that neither are logical 0 or logical 1, breaking the abstraction of Boolean logic. Unfortunately, any way of reading a signal from an unsynchronized clock domain or performing an analog-to-digital conversion incurs the risk of a metastable upset; no digital circuit can deterministically avoid, resolve, or detect metastability (Marino, 1981). Synchronizers, the only traditional countermeasure, exponentially decrease the odds of maintained metastability over time. Trading synchronization delay for an increased probability to resolve metastability to logical 0 or 1, they do not guarantee success. We propose a fundamentally different approach: It is possible to contain metastability by fine-grained logical masking so that it cannot infect the entire circuit. This technique guarantees a limited degree of metastability in---and uncertainty about---the output. At the heart of our approach lies a time- and value-discrete model for metastability in synchronous clocked digital circuits. Metastability is propagated in a worst-case fashion, allowing to derive deterministic guarantees, without and unlike synchronizers. The proposed model permits positive results and passes the test of reproducing Marino's impossibility results. We fully classify which functions can be computed by circuits with standard registers. Regarding masking registers, we show that they become computationally strictly more powerful with each clock cycle, resulting in a non-trivial hierarchy of computable functions

Asynchronous Logic Design with Flip-Flop Constraints

Some techniques are presented to permit the implementation of asynchronous sequential circuits using standard flip-flops. An algorithm is presented for the RS flip-flop, and it is shown that any flow table may be realized using the algorithm (the flow table is assumed to be realizable using standard logic gates). The approach is shown to be directly applicable to synchronous circuits, and transition flip-flops (JK, D, and T) are analyzed using the ideas developed. Constraints are derived for the flow tables to meet to be realizable using transition flip-flops in asynchronous situations, and upper and lower bounds on the number of transition flip-flops required to implement a given flow table are stated

NASA Space Engineering Research Center for VLSI systems design

This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design

Application specific asynchronous microengines for efficient high-level control

technical reportDespite the growing interest in asynchronous circuits programmable asynchronous controllers based on the idea of microprogramming have not been actively pursued Since programmable control is widely used in many commercial ASICs to allow late correction of design errors to easily upgrade product families to meet the time to market and even efficient run time modications to control in adaptive systems we consider it crucial that self timed techniques support efficient programmable control This is especially true given that asynchronous (self-timed) circuits are well suited for realizing reactive and control intensive designs We offer a practical solution to programmable asynchronous control in the form of application-speciffic microprogrammed asynchronous controllers (or microengines). The features of our solution include a modular and easily extensible datapath structure support for two main styles of hand shaking (namely two phase and four phase), and many efficiency measures based on exploiting concurrency between operations and employing efficient circuit structures Our results demonstrate that the proposed microengine can yield high performance-in fact performance close to that offered by automated high level synthesis tools targeting custom hard wired burstmode machines

Application specific asynchronous microgengines for efficient high-level control

technical reportDespite the growing interest in asynchronous circuits, programmable asynchronous controllers based on the idea of microprogramming have not been actively pursued. Since programmable control is widely used in many commercial ASICs to allow late correction of design errors, to easily upgrade product families, to meet the time to market, and even effect run-time modifications to control in adaptive systems, we consider it crucial that self-timed techniques support efficient programmable control. This is especially true given that asynchronous (self-timed) circuits are well suited for realizing reactive and control-intensive designs. We offer a practical solution to programmable asynchronous control in the form of application-specific micro-programmed asynchronous controllers (or microengines). The features of our solution include a modular and easily extensible datapath structure, support for two main styles of handshaking (namely two-phase and four-phase), and many efficiency measures based on exploiting concurrency between operations and employing efficient circuit structures. Our results demonstrate that the proposed microengine can yield high performance?in fact performance close to that offered by automated high-level synthesis tools targeting custom hard-wired burstmode machines

Elastic systems

Elastic systems provide tolerance to the variations in computation and communication delays. The incorporation of elasticity opens new opportunities for optimization using new correct-by-construction transformations that cannot be applied to rigid non-elastic systems. The basics of synchronous and asynchronous elastic systems will be reviewed. A set of behavior-preserving transformations will be presented: retiming, recycling, early evaluation, variable-latency units and speculative execution. The application of these transformations for performance and power optimization will be discussed. Finally, a novel framework for microarchitectural exploration will be introduced, showing that the optimal pipelining of a circuit can be automatically obtained by using the previous transformations.Peer ReviewedPostprint (published version

Verification and synthesis of asynchronous control circuits using petri net unfoldings

PhD ThesisDesign of asynchronous control circuits has traditionally been associated with application of formal methods. Event-based models, such as Petri nets, provide a compact and easy to understand way of specifying asynchronous behaviour. However, analysis of their behavioural properties is often hindered by the problem of exponential growth of reachable state space. This work proposes a new method for analysis of asynchronous circuit models based on Petri nets. The new approach is called PN-unfolding segment. It extends and improves existing Petri nets unfolding approaches. In addition, this thesis proposes a new analysis technique for Signal Transition Graphs along with an efficient verification technique which is also based on the Petri net unfolding. The former is called Full State Graph, the latter - STG-unfolding segment. The boolean logic synthesis is an integral part of the asynchronous circuit design process. In many cases, even if the verification of an asynchronous circuit specification has been performed successfully, it is impossible to obtain its implementation using existing methods because they are based on the reachability analysis. A new approach is proposed here for automated synthesis of speed-independent circuits based on the STG-unfolding segment constructed during the verification of the circuit's specification. Finally, this work presents experimental results showing the need for the new Petri net unfolding techniques and confirming the advantages of application of partial order approach to analysis, verification and synthesis of asynchronous circuits.The Research Committee, Newcastle University: Overseas Research Studentship Award

Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals

Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve

The computer-aided generation of flow-tables for asynchronous sequential circuits

One step in the synthesis of asynchronous sequential circuits is the construction of a flow table. This paper discusses the requirements of a computer program to allow on-line generation of flow tables for asynchronous sequential circuits. Such topics as the form of the data entered into the program, the type of terminal required, the routines necessary for the designer to enter and correct data, and the internal data structure are discussed. An algorithm for the generation of these flow tables is also presented --Abstract, page ii