Empirical and Statistical Application Modeling Using on -Chip Performance Monitors.

To analyze the performance of applications and architectures, both programmers and architects desire formal methods to explain anomalous behavior. To this end, we present various methods that utilize non-intrusive, performance-monitoring hardware only recently available on microprocessors to provide further explanations of observed behavior. All the methods attempt to characterize and explain the instruction-level parallelism achieved by codes on different architectures. We also present a prototype tool automating the analysis process to exploit the advantages of the empirical and statistical methods proposed. The empirical, statistical and hybrid methods are discussed and explained with case study results provided. The given methods further the wealth of tools available to programmer\u27s and architects for generally understanding the performance of scientific applications. Specifically, the models and tools presented provide new methods for evaluating and categorizing application performance. The empirical memory model serves to quantify the hierarchical memory performance of applications by inferring the incurred latencies of codes after the effect of latency hiding techniques are realized. The instruction-level model and its extensions model on-chip performance analytically giving insight into inherent performance bottlenecks in superscalar architectures. The statistical model and its hybrid extension provide other methods of categorizing codes via their statistical variations. The PTERA performance tool automates the use of performance counters for use by these methods across platforms making the modeling process easier still. These unique methods provide alternatives to performance modeling and categorizing not available previously in an attempt to utilize the inherent modeling capabilities of performance monitors on commodity processors for scientific applications

A general framework to realize an abstract machine as an ILP processor with application to java

Ph.DDOCTOR OF PHILOSOPH

Modeling and scheduling heterogeneous multi-core architectures

Om de prestatie van toekomstige processors en processorarchitecturen te evalueren wordt vaak gebruik gemaakt van een simulator die het gedrag en de prestatie van de processor modelleert. De prestatie bepalen van de uitvoering van een computerprogramma op een gegeven processorarchitectuur m.b.v. een simulator duurt echter vele grootteordes langer dan de werkelijke uitvoeringstijd. Dit beperkt in belangrijke mate de hoeveelheid experimenten die gedaan kunnen worden. In dit doctoraatswerk werd het Multi-Program Performance Model (MPPM) ontwikkeld, een innovatief alternatief voor traditionele simulatie, dat het mogelijk maakt om tot 100.000x sneller een processorconfiguratie te evalueren. MPPM laat ons toe om nooit geziene exploraties te doen. Gebruik makend van dit raamwerk hebben we aangetoond dat de taakplanning cruciaal is om heterogene meerkernige processors optimaal te benutten. Vervolgens werd een nieuwe manier voorgesteld om op een schaalbare manier de taakplanning uit te voeren, namelijk Performance Impact Estimation (PIE). Tijdens de uitvoering van een draad op een gegeven processorkern schatten we de prestatie op een ander type kern op basis van eenvoudig op te meten prestatiemetrieken. Zo beschikken we op elk moment over alle nodige informatie om een efficiënte taakplanning te doen. Dit laat ons bovendien toe te optimaliseren voor verschillende criteria zoals uitvoeringstijd, doorvoersnelheid of fairness

Evaluating the performance of legacy applications on emerging parallel architectures

The gap between a supercomputer's theoretical maximum (\peak") oatingpoint performance and that actually achieved by applications has grown wider over time. Today, a typical scientific application achieves only 5{20% of any given machine's peak processing capability, and this gap leaves room for significant improvements in execution times. This problem is most pronounced for modern \accelerator" architectures { collections of hundreds of simple, low-clocked cores capable of executing the same instruction on dozens of pieces of data simultaneously. This is a significant change from the low number of high-clocked cores found in traditional CPUs, and effective utilisation of accelerators typically requires extensive code and algorithmic changes. In many cases, the best way in which to map a parallel workload to these new architectures is unclear. The principle focus of the work presented in this thesis is the evaluation of emerging parallel architectures (specifically, modern CPUs, GPUs and Intel MIC) for two benchmark codes { the LU benchmark from the NAS Parallel Benchmark Suite and Sandia's miniMD benchmark { which exhibit complex parallel behaviours that are representative of many scientific applications. Using combinations of low-level intrinsic functions, OpenMP, CUDA and MPI, we demonstrate performance improvements of up to 7x for these workloads. We also detail a code development methodology that permits application developers to target multiple architecture types without maintaining completely separate implementations for each platform. Using OpenCL, we develop performance portable implementations of the LU and miniMD benchmarks that are faster than the original codes, and at most 2x slower than versions highly-tuned for particular hardware. Finally, we demonstrate the importance of evaluating architectures at scale (as opposed to on single nodes) through performance modelling techniques, highlighting the problems associated with strong-scaling on emerging accelerator architectures

Timing speculation and adaptive reliable overclocking techniques for aggressive computer systems

Computers have changed our lives beyond our own imagination in the past several decades. The continued and progressive advancements in VLSI technology and numerous micro-architectural innovations have played a key role in the design of spectacular low-cost high performance computing systems that have become omnipresent in today\u27s technology driven world. Performance and dependability have become key concerns as these ubiquitous computing machines continue to drive our everyday life. Every application has unique demands, as they run in diverse operating environments. Dependable, aggressive and adaptive systems improve efficiency in terms of speed, reliability and energy consumption. Traditional computing systems run at a fixed clock frequency, which is determined by taking into account the worst-case timing paths, operating conditions, and process variations. Timing speculation based reliable overclocking advocates going beyond worst-case limits to achieve best performance while not avoiding, but detecting and correcting a modest number of timing errors. The success of this design methodology relies on the fact that timing critical paths are rarely exercised in a design, and typical execution happens much faster than the timing requirements dictated by worst-case design methodology. Better-than-worst-case design methodology is advocated by several recent research pursuits, which exploit dependability techniques to enhance computer system performance. In this dissertation, we address different aspects of timing speculation based adaptive reliable overclocking schemes, and evaluate their role in the design of low-cost, high performance, energy efficient and dependable systems. We visualize various control knobs in the design that can be favorably controlled to ensure different design targets. As part of this research, we extend the SPRIT3E, or Superscalar PeRformance Improvement Through Tolerating Timing Errors, framework, and characterize the extent of application dependent performance acceleration achievable in superscalar processors by scrutinizing the various parameters that impact the operation beyond worst-case limits. We study the limitations imposed by short-path constraints on our technique, and present ways to exploit them to maximize performance gains. We analyze the sensitivity of our technique\u27s adaptiveness by exploring the necessary hardware requirements for dynamic overclocking schemes. Experimental analysis based on SPEC2000 benchmarks running on a SimpleScalar Alpha processor simulator, augmented with error rate data obtained from hardware simulations of a superscalar processor, are presented. Even though reliable overclocking guarantees functional correctness, it leads to higher power consumption. As a consequence, reliable overclocking without considering on-chip temperatures will bring down the lifetime reliability of the chip. In this thesis, we analyze how reliable overclocking impacts the on-chip temperature of a microprocessor and evaluate the effects of overheating, due to such reliable dynamic frequency tuning mechanisms, on the lifetime reliability of these systems. We then evaluate the effect of performing thermal throttling, a technique that clamps the on-chip temperature below a predefined value, on system performance and reliability. Our study shows that a reliably overclocked system with dynamic thermal management achieves 25% performance improvement, while lasting for 14 years when being operated within 353K. Over the past five decades, technology scaling, as predicted by Moore\u27s law, has been the bedrock of semiconductor technology evolution. The continued downscaling of CMOS technology to deep sub-micron gate lengths has been the primary reason for its dominance in today\u27s omnipresent silicon microchips. Even as the transition to the next technology node is indispensable, the initial cost and time associated in doing so presents a non-level playing field for the competitors in the semiconductor business. As part of this thesis, we evaluate the capability of speculative reliable overclocking mechanisms to maximize performance at a given technology level. We evaluate its competitiveness when compared to technology scaling, in terms of performance, power consumption, energy and energy delay product. We present a comprehensive comparison for integer and floating point SPEC2000 benchmarks running on a simulated Alpha processor at three different technology nodes in normal and enhanced modes. Our results suggest that adopting reliable overclocking strategies will help skip a technology node altogether, or be competitive in the market, while porting to the next technology node. Reliability has become a serious concern as systems embrace nanometer technologies. In this dissertation, we propose a novel fault tolerant aggressive system that combines soft error protection and timing error tolerance. We replicate both the pipeline registers and the pipeline stage combinational logic. The replicated logic receives its inputs from the primary pipeline registers while writing its output to the replicated pipeline registers. The organization of redundancy in the proposed Conjoined Pipeline system supports overclocking, provides concurrent error detection and recovery capability for soft errors, intermittent faults and timing errors, and flags permanent silicon defects. The fast recovery process requires no checkpointing and takes three cycles. Back annotated post-layout gate-level timing simulations, using 45nm technology, of a conjoined two-stage arithmetic pipeline and a conjoined five-stage DLX pipeline processor, with forwarding logic, show that our approach, even under a severe fault injection campaign, achieves near 100% fault coverage and an average performance improvement of about 20%, when dynamically overclocked

Many-core architectures with time predictable execution Support for hard real-time applications

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2013.Cataloged from PDF version of thesis.Includes bibliographical references (p. 183-193).Hybrid control systems are a growing domain of application. They are pervasive and their complexity is increasing rapidly. Distributed control systems for future "Intelligent Grid" and renewable energy generation systems are demanding high-performance, hard real-time computation, and more programmability. General-purpose computer systems are primarily designed to process data and not to interact with physical processes as required by these systems. Generic general-purpose architectures even with the use of real-time operating systems fail to meet the hard realtime constraints of hybrid system dynamics. ASIC, FPGA, or traditional embedded design approaches to these systems often result in expensive, complicated systems that are hard to program, reuse, or maintain. In this thesis, we propose a domain-specific architecture template targeting hybrid control system applications. Using power electronics control applications, we present new modeling techniques, synthesis methodologies, and a parameterizable computer architecture for these large distributed control systems. We propose a new system modeling approach, called Adaptive Hybrid Automaton, based on previous work in control system theory, that uses a mixed-model abstractions and lends itself well to digital processing. We develop a domain-specific architecture based on this modeling that uses heterogeneous processing units and predictable execution, called MARTHA. We develop a hard real-time aware router architecture to enable deterministic on-chip interconnect network communication. We present several algorithms for scheduling task-based applications onto these types of heterogeneous architectures. We create Heracles, an open-source, functional, parameterized, synthesizable many-core system design toolkit, that can be used to explore future multi/many-core processors with different topologies, routing schemes, processing elements or cores, and memory system organizations. Using the Heracles design tool we build a prototype of the proposed architecture using a state-of-the-art FPGA-based platform, and deploy and test it in actual physical power electronics systems. We develop and release an open-source, small representative set of power electronics system applications that can be used for hard real-time application benchmarking.by Michel A. Kinsy.Ph.D

Optimización del rendimiento y la eficiencia energética en sistemas masivamente paralelos

RESUMEN Los sistemas heterogéneos son cada vez más relevantes, debido a sus capacidades de rendimiento y eficiencia energética, estando presentes en todo tipo de plataformas de cómputo, desde dispositivos embebidos y servidores, hasta nodos HPC de grandes centros de datos. Su complejidad hace que sean habitualmente usados bajo el paradigma de tareas y el modelo de programación host-device. Esto penaliza fuertemente el aprovechamiento de los aceleradores y el consumo energético del sistema, además de dificultar la adaptación de las aplicaciones. La co-ejecución permite que todos los dispositivos cooperen para computar el mismo problema, consumiendo menos tiempo y energía. No obstante, los programadores deben encargarse de toda la gestión de los dispositivos, la distribución de la carga y la portabilidad del código entre sistemas, complicando notablemente su programación. Esta tesis ofrece contribuciones para mejorar el rendimiento y la eficiencia energética en estos sistemas masivamente paralelos. Se realizan propuestas que abordan objetivos generalmente contrapuestos: se mejora la usabilidad y la programabilidad, a la vez que se garantiza una mayor abstracción y extensibilidad del sistema, y al mismo tiempo se aumenta el rendimiento, la escalabilidad y la eficiencia energética. Para ello, se proponen dos motores de ejecución con enfoques completamente distintos. EngineCL, centrado en OpenCL y con una API de alto nivel, favorece la máxima compatibilidad entre todo tipo de dispositivos y proporciona un sistema modular extensible. Su versatilidad permite adaptarlo a entornos para los que no fue concebido, como aplicaciones con ejecuciones restringidas por tiempo o simuladores HPC de dinámica molecular, como el utilizado en un centro de investigación internacional. Considerando las tendencias industriales y enfatizando la aplicabilidad profesional, CoexecutorRuntime proporciona un sistema flexible centrado en C++/SYCL que dota de soporte a la co-ejecución a la tecnología oneAPI. Este runtime acerca a los programadores al dominio del problema, posibilitando la explotación de estrategias dinámicas adaptativas que mejoran la eficiencia en todo tipo de aplicaciones.ABSTRACT Heterogeneous systems are becoming increasingly relevant, due to their performance and energy efficiency capabilities, being present in all types of computing platforms, from embedded devices and servers to HPC nodes in large data centers. Their complexity implies that they are usually used under the task paradigm and the host-device programming model. This strongly penalizes accelerator utilization and system energy consumption, as well as making it difficult to adapt applications. Co-execution allows all devices to simultaneously compute the same problem, cooperating to consume less time and energy. However, programmers must handle all device management, workload distribution and code portability between systems, significantly complicating their programming. This thesis offers contributions to improve performance and energy efficiency in these massively parallel systems. The proposals address the following generally conflicting objectives: usability and programmability are improved, while ensuring enhanced system abstraction and extensibility, and at the same time performance, scalability and energy efficiency are increased. To achieve this, two runtime systems with completely different approaches are proposed. EngineCL, focused on OpenCL and with a high-level API, provides an extensible modular system and favors maximum compatibility between all types of devices. Its versatility allows it to be adapted to environments for which it was not originally designed, including applications with time-constrained executions or molecular dynamics HPC simulators, such as the one used in an international research center. Considering industrial trends and emphasizing professional applicability, CoexecutorRuntime provides a flexible C++/SYCL-based system that provides co-execution support for oneAPI technology. This runtime brings programmers closer to the problem domain, enabling the exploitation of dynamic adaptive strategies that improve efficiency in all types of applications.Funding: This PhD has been supported by the Spanish Ministry of Education (FPU16/03299 grant), the Spanish Science and Technology Commission under contracts TIN2016-76635-C2-2-R and PID2019-105660RB-C22. This work has also been partially supported by the Mont-Blanc 3: European Scalable and Power Efficient HPC Platform based on Low-Power Embedded Technology project (G.A. No. 671697) from the European Union’s Horizon 2020 Research and Innovation Programme (H2020 Programme). Some activities have also been funded by the Spanish Science and Technology Commission under contract TIN2016-81840-REDT (CAPAP-H6 network). The Integration II: Hybrid programming models of Chapter 4 has been partially performed under the Project HPC-EUROPA3 (INFRAIA-2016-1-730897), with the support of the EC Research Innovation Action under the H2020 Programme. In particular, the author gratefully acknowledges the support of the SPMT Department of the High Performance Computing Center Stuttgart (HLRS)

Automating the construction of a complier heuristics using machine learning

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2006.Includes bibliographical references (p. 153-162).Compiler writers are expected to create effective and inexpensive solutions to NP-hard problems such as instruction scheduling and register allocation. To make matters worse, separate optimization phases have strong interactions and competing resource constraints. Compiler writers deal with system complexity by dividing the problem into multiple phases and devising approximate heuristics for each phase. However, to achieve satisfactory performance, developers are forced to manually tweak their heuristics with trial-and-error experimentation. In this dissertation I present meta optimization, a methodology for automatically constructing high quality compiler heuristics using machine learning techniques. This thesis describes machine-learned heuristics for three important compiler optimizations: hyperblock formation, register allocation, and loop unrolling. The machine-learned heuristics outperform (by as much as 3x in some cases) their state-of-the-art hand-crafted counterparts. By automatically collecting data and systematically analyzing them, my techniques discover subtle interactions that even experienced engineers would likely overlook. In addition to improving performance, my techniques can significantly reduce the human effort involved in compiler design.(cont.) Machine learning algorithms can design critical portions of compiler heuristics, thereby freeing the human designer to focus on compiler correctness. The progression of experiments I conduct in this thesis leads to collaborative compilation, an approach which enables ordinary users to transparently train compiler heuristics by running their applications as they normally would. The collaborative system automatically adapts itself to the applications in which a community of users is interested.by Mark W. Stephenson.Ph.D