Bridging the Testing Speed Gap: Design for Delay Testability

The economic testing of high-speed digital ICs is becoming increasingly problematic. Even advanced, expensive testers are not always capable of testing these ICs because of their high-speed limitations. This paper focuses on a design for delay testability technique such that high-speed ICs can be tested using inexpensive, low-speed ATE. Also extensions for possible full BIST of delay faults are addresse

A low-speed BIST framework for high-performance circuit testing

Testing of high performance integrated circuits is becoming increasingly a challenging task owing to high clock frequencies. Often testers are not able to test such devices due to their limited high frequency capabilities. In this article we outline a design-for-test methodology such that high performance devices can be tested on relatively low performance testers. In addition, a BIST framework is discussed based on this methodology. Various implementation aspects of this technique are also addresse

Design for Test and Hardware Security Utilizing Tester Authentication Techniques

Design-for-Test (DFT) techniques have been developed to improve testability of integrated circuits. Among the known DFT techniques, scan-based testing is considered an efficient solution for digital circuits. However, scan architecture can be exploited to launch a side channel attack. Scan chains can be used to access a cryptographic core inside a system-on-chip to extract critical information such as a private encryption key. For a scan enabled chip, if an attacker is given unlimited access to apply all sorts of inputs to the Circuit-Under-Test (CUT) and observe the outputs, the probability of gaining access to critical information increases. In this thesis, solutions are presented to improve hardware security and protect them against attacks using scan architecture. A solution based on tester authentication is presented in which, the CUT requests the tester to provide a secret code for authentication. The tester authentication circuit limits the access to the scan architecture to known testers. Moreover, in the proposed solution the number of attempts to apply test vectors and observe the results through the scan architecture is limited to make brute-force attacks practically impossible. A tester authentication utilizing a Phase Locked Loop (PLL) to encrypt the operating frequency of both DUT/Tester has also been presented. In this method, the access to the critical security circuits such as crypto-cores are not granted in the test mode. Instead, a built-in self-test method is used in the test mode to protect the circuit against scan-based attacks. Security for new generation of three-dimensional (3D) integrated circuits has been investigated through 3D simulations COMSOL Multiphysics environment. It is shown that the process of wafer thinning for 3D stacked IC integration reduces the leakage current which increases the chip security against side-channel attacks

Explointing FPGA block memories for protected cryptographic implementations

Modern Field Programmable Gate Arrays (FPGAs) are power packed with features to facilitate designers. Availability of features like huge block memory (BRAM), Digital Signal Processing (DSP) cores, embedded CPU makes the design strategy of FPGAs quite different from ASICs. FPGA are also widely used in security-critical application where protection against known attacks is of prime importance. We focus ourselves on physical attacks which target physical implementations. To design countermeasures against such attacks, the strategy for FPGA designers should also be different from that in ASIC. The available features should be exploited to design compact and strong countermeasures. In this paper, we propose methods to exploit the BRAMs in FPGAs for designing compact countermeasures. BRAM can be used to optimize intrinsic countermeasures like masking and dual-rail logic, which otherwise have significant overhead (at least 2X). The optimizations are applied on a real AES-128 co-processor and tested for area overhead and resistance on Xilinx Virtex-5 chips. The presented masking countermeasure has an overhead of only 16% when applied on AES. Moreover Dual-rail Precharge Logic (DPL) countermeasure has been optimized to pack the whole sequential part in the BRAM, hence enhancing the security. Proper robustness evaluations are conducted to analyze the optimization for area and security

Reliability Enhancement Of Ring Oscillator Based Physically Unclonable Functions

Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2012Thesis (M.Sc.) -- İstanbul Technical University, Institute of Science and Technology, 2012Bu çalışmada, halka osilatör tabanlı fiziksel klonlanamayan fonksiyon devrelerinin, çeşitli çevresel etkiler karşısında güvenilirliklerin artırılması amaçlanmıştır. Öncelikle, osilatör çiftlerinin ürettiği frekans farklılıklarını ve dinamik etkileri gözlemleyip modelleyebilmek için çeşitli sahada programlanabilir kapı dizilerinin (FPGA) farklı bölgelerinde osilatör çiftleri gerçeklenmiş ve frekans farklılıkları ölçülmüştür. Bu ölçümler sonucunda halka osilatör çiftlerinine ilişkin statik ve dinamik dağılımlar elde edilmiştir. Güvenilirliği artırmak amacıyla halka osilatörleri etiketleyen bir yöntem önerilmiştir. Bu çalışmada ayrıca, bir osilatör çiftinden birden fazla bit elde etme işlemi de incelenmiş ve dinamik etkilere karşı test edilmiştir. Etiketleme yönteminin etkinliğini ve bir osilatör çiftinden birden fazla bit elde etme işlemini gerçek devre üzerinde incelemek amacıyla, fiziksel klonlanamayan fonksiyon devresi FPGA üzerinde gerçeklenmiştir. Sıcaklık odası ile ortamın sıcaklığı 10 – 65 °C arasında değiştirilmiştir. Sonuç olarak, ortam sıcaklığının artmasıyla birlikte güvenilmez bit sayısının arttığı gözlenmiştir. Etiketleme yöntemi kullanıldığında güvenilmez bite rastlanmamıştır. Bir halka osilatör çiftinden birden fazla bit (iki ve üç bit bilgi) elde edilmesi de test edilmiştir. Elde edilen iki ve üç bitlik verilerin küçük bir farklılıkla birlikte eşit dağılımlı olduğu gözlenmiştir. Bir osilatör çiftinden elde edilen bit sayısı arttıkça, güvenilir olmayan bitlerin sayısı da artmıştır. Fakat bir osilatörden iki ve üç bit elde etmede tüm hataların komşu bölgede olduğu gözlenmiştir.In this thesis, it is aimed to enhance the reliability of ring oscillator based Physically Unclonable Functions (PUFs) under different environmental variations. In order to observe and model the frequency difference of ring oscillator pairs and dynamic effects, ring oscillators are realized and measured at different locations of different Field Programmable Gate Arrays (FPGAs). After the measurements, static and dynamic distributions of ring oscillator pairs are obtained. In order to increase the reliability, a new technique that is labeling ring oscillators, is proposed. Also, in this study, the process of obtaining multiple bits from a ring oscillator pair is observed and tested with respect to dynamic effects. In order to analyze the enhancement of labeling technique and multiple bit extraction at the circuit, the PUF circuit is implemented on an FPGA. The ambient temperature is changed between 10 – 65 °C with a temperature chamber. As a result, it is observed that with increasing ambient temperature, the number of unreliable bits are increased. When labeling technique is used, no unreliable bits are observed. Multiple bits extraction (two and three bits extraction) is also tested. It is observed that the distribution of two and three bit wide data are almost equally distributed. The number of unreliable bits are increased with the extracted bit numbers. However, it is seen that all erronous bits are caused by jumping to adjacent region.Yüksek LisansM.Sc

Techniques for Improving Security and Trustworthiness of Integrated Circuits

The integrated circuit (IC) development process is becoming increasingly vulnerable to malicious activities because untrusted parties could be involved in this IC development flow. There are four typical problems that impact the security and trustworthiness of ICs used in military, financial, transportation, or other critical systems: (i) Malicious inclusions and alterations, known as hardware Trojans, can be inserted into a design by modifying the design during GDSII development and fabrication. Hardware Trojans in ICs may cause malfunctions, lower the reliability of ICs, leak confidential information to adversaries or even destroy the system under specifically designed conditions. (ii) The number of circuit-related counterfeiting incidents reported by component manufacturers has increased significantly over the past few years with recycled ICs contributing the largest percentage of the total reported counterfeiting incidents. Since these recycled ICs have been used in the field before, the performance and reliability of such ICs has been degraded by aging effects and harsh recycling process. (iii) Reverse engineering (RE) is process of extracting a circuit’s gate-level netlist, and/or inferring its functionality. The RE causes threats to the design because attackers can steal and pirate a design (IP piracy), identify the device technology, or facilitate other hardware attacks. (iv) Traditional tools for uniquely identifying devices are vulnerable to non-invasive or invasive physical attacks. Securing the ID/key is of utmost importance since leakage of even a single device ID/key could be exploited by an adversary to hack other devices or produce pirated devices. In this work, we have developed a series of design and test methodologies to deal with these four challenging issues and thus enhance the security, trustworthiness and reliability of ICs. The techniques proposed in this thesis include: a path delay fingerprinting technique for detection of hardware Trojans, recycled ICs, and other types counterfeit ICs including remarked, overproduced, and cloned ICs with their unique identifiers; a Built-In Self-Authentication (BISA) technique to prevent hardware Trojan insertions by untrusted fabrication facilities; an efficient and secure split manufacturing via Obfuscated Built-In Self-Authentication (OBISA) technique to prevent reverse engineering by untrusted fabrication facilities; and a novel bit selection approach for obtaining the most reliable bits for SRAM-based physical unclonable function (PUF) across environmental conditions and silicon aging effects

FPGA-Based PUF Designs: A Comprehensive Review and Comparative Analysis

Field-programmable gate arrays (FPGAs) have firmly established themselves as dynamic platforms for the implementation of physical unclonable functions (PUFs). Their intrinsic reconfigurability and profound implications for enhancing hardware security make them an invaluable asset in this realm. This groundbreaking study not only dives deep into the universe of FPGA-based PUF designs but also offers a comprehensive overview coupled with a discerning comparative analysis. PUFs are the bedrock of device authentication and key generation and the fortification of secure cryptographic protocols. Unleashing the potential of FPGA technology expands the horizons of PUF integration across diverse hardware systems. We set out to understand the fundamental ideas behind PUF and how crucially important it is to current security paradigms. Different FPGA-based PUF solutions, including static, dynamic, and hybrid systems, are closely examined. Each design paradigm is painstakingly examined to reveal its special qualities, functional nuances, and weaknesses. We closely assess a variety of performance metrics, including those related to distinctiveness, reliability, and resilience against hostile threats. We compare various FPGA-based PUF systems against one another to expose their unique advantages and disadvantages. This study provides system designers and security professionals with the crucial information they need to choose the best PUF design for their particular applications. Our paper provides a comprehensive view of the functionality, security capabilities, and prospective applications of FPGA-based PUF systems. The depth of knowledge gained from this research advances the field of hardware security, enabling security practitioners, researchers, and designers to make wise decisions when deciding on and implementing FPGA-based PUF solutions.publishedVersio