Lightweight Synchronization Algorithm with Self-Calibration for Industrial LORA Sensor Networks

Wireless sensor and actuator networks are gaining momentum in the era of Industrial Internet of Things IIoT. The usage of the close-loop data from sensors in the manufacturing chain is extending the common monitoring scenario of the Wireless Sensors Networks WSN where data were just logged. In this paper we present an accurate timing synchronization for TDMA implemented on the state of art IoT radio, such as LoRa, that is a good solution in industrial environments for its high robustness. Experimental results show how it is possible to modulate the drift correction and keep the synchronization error within the requirements

TS-MUWSN: Time synchronization for mobile underwater sensor networks

Time synchronization is an important, yet challenging, problem in underwater sensor networks (UWSNs). This challenge can be attributed to: 1) messaging timestamping; 2) node mobility; and 3) Doppler scale effect. To mitigate these problems, we present an acoustic-based time-synchronization algorithm for UWSN, where we compare several message time-stamping algorithms in addition to different Doppler scale estimators. A synchronization system is based on a bidirectional message exchange between a reference node and a slave one, which has to be synchronized. Therefore, we take as reference the DA-Sync-like protocol (Liu et al., 2014), which takes into account node's movement by using first-order kinematic equations, which refine Doppler scale factor estimation accuracy, and result in better synchronization performance. In our study, we propose to modify both time-stamping and Doppler scale estimation procedures. Besides simulation, we also perform real tests in controlled underwater communication in a water test tank and a shallow-water test in the Mediterranean Sea.Peer ReviewedPostprint (author's final draft

Enhanced Precision Time Synchronization for Wireless Sensor Networks

Time synchronization in wireless sensor networks (WSNs) is a fundamental issue for the coordination of distributed entities and events. Nondeterministic latency, which may decrease the accuracy and precision of time synchronization can occur at any point in the network layers. Specially, random back-off by channel contention leads to a large uncertainty. In order to reduce the large nondeterministic uncertainty from channel contention, we propose an enhanced precision time synchronization protocol in this paper. The proposed method reduces the traffic needed for the synchronization procedure by selectively forwarding the packet. Furthermore, the time difference between sensor nodes increases as time advances because of the use of a clock source with a cheap crystal oscillator. In addition, we provide a means to maintain accurate time by adopting hardware-assisted time stamp and drift correction. Experiments are conducted to evaluate the performance of the proposed method, for which sensor nodes are designed and implemented. According to the evaluation results, the performance of the proposed method is better than that of a traditional time synchronization protocol

Efficient abstraction of clock synchronization at the operating system level

Distributed embedded systems are emerging and gaining importance in various domains, including industrial control applications where time determinism – hence network clock synchronization – is fundamental. In modern applications, moreover, this core functionality is required by many different software components, from OS kernel and radio stack up to applications. An abstraction layer devoted to handling time needs therefore introducing, and to encapsulate time corrections at the lowest possible level, the said layer should take the form of a timer device driver offering a Virtual Clock to the entire system. In this paper we show that doing so introduces a nonlinearity in the dynamics of the clock, and we design a controller based on feedback linearization to handle the issue. To put the idea to work, we extend the Miosix RTOS with a generic interface allowing to implement virtual clocks, including the newly designed controller that we call FLOPSYNC-3 after its ancestor. Also, we introduce the resulting virtual clock in the TDMH [20] real-time wireless mesh protocol

A Survey of Clock Synchronization Over Packet-Switched Networks

Clock synchronization is a prerequisite for the realization of emerging applications in various domains such as industrial automation and the intelligent power grid. This paper surveys the standardized protocols and technologies for providing synchronization of devices connected by packet-switched networks. A review of synchronization impairments and the state-of-the-art mechanisms to improve the synchronization accuracy is then presented. Providing microsecond to sub-microsecond synchronization accuracy under the presence of asymmetric delays in a cost-effective manner is a challenging problem, and still an open issue in many application scenarios. Further, security is of significant importance for systems where timing is critical. The security threats and solutions to protect exchanged synchronization messages are also discussed

Droplet: A New Denial-of-Service Attack on Low Power Wireless Sensor Networks

In this paper we present a new kind of Denial-of-Service attack against the PHY layer of low power wireless sensor networks. Overcoming the very limited range of jamming-based attacks, this attack can penetrate deep into a target network with high power efficiency. We term this the Droplet attack, as it attains enormous disruption by dropping small, payload-less frame headers to its victim's radio receiver, depriving the latter of bandwidth and sleep time. We demonstrate the Droplet attack's high damage rate to full duty-cycle receivers, and further show that a high frequency version of Droplet can even force nodes running on very low duty-cycle MAC protocols to drop most of their packets