1,217 research outputs found
Towards Tactile Internet in Beyond 5G Era: Recent Advances, Current Issues and Future Directions
Tactile Internet (TI) is envisioned to create a paradigm shift from the content-oriented
communications to steer/control-based communications by enabling real-time transmission of haptic information (i.e., touch, actuation, motion, vibration, surface texture) over Internet in addition to the conventional audiovisual and data traffics. This emerging TI technology, also considered as the next evolution phase of Internet of Things (IoT), is expected to create numerous opportunities for technology markets in a wide variety of applications ranging from teleoperation systems and Augmented/Virtual Reality (AR/VR) to automotive safety and eHealthcare towards addressing the complex problems of human society. However, the realization of TI over wireless media in the upcoming Fifth Generation (5G) and beyond networks creates various non-conventional communication challenges and stringent requirements
in terms of ultra-low latency, ultra-high reliability, high data-rate connectivity, resource allocation, multiple access and quality-latency-rate tradeoff. To this end, this paper aims to provide a holistic view on wireless TI along with a thorough review of the existing state-of-the-art, to identify and analyze the involved technical issues, to highlight potential solutions and to propose future research directions. First, starting with the vision of TI and recent advances and a review of related survey/overview articles, we present a generalized framework for wireless TI in the Beyond 5G Era including a TI architecture, the main technical requirements, the key application areas and potential enabling technologies. Subsequently, we provide a comprehensive review of the existing TI works by broadly categorizing them into three main paradigms; namely, haptic communications, wireless AR/VR, and autonomous, intelligent and cooperative mobility systems. Next, potential enabling technologies across physical/Medium Access Control (MAC) and network layers are identified and discussed in detail. Also, security and privacy issues of TI applications are discussed
along with some promising enablers. Finally, we present some open research challenges and recommend promising future research directions
Learning Human-Robot Collaboration Insights through the Integration of Muscle Activity in Interaction Motion Models
Recent progress in human-robot collaboration makes fast and fluid
interactions possible, even when human observations are partial and occluded.
Methods like Interaction Probabilistic Movement Primitives (ProMP) model human
trajectories through motion capture systems. However, such representation does
not properly model tasks where similar motions handle different objects. Under
current approaches, a robot would not adapt its pose and dynamics for proper
handling. We integrate the use of Electromyography (EMG) into the Interaction
ProMP framework and utilize muscular signals to augment the human observation
representation. The contribution of our paper is increased task discernment
when trajectories are similar but tools are different and require the robot to
adjust its pose for proper handling. Interaction ProMPs are used with an
augmented vector that integrates muscle activity. Augmented time-normalized
trajectories are used in training to learn correlation parameters and robot
motions are predicted by finding the best weight combination and temporal
scaling for a task. Collaborative single task scenarios with similar motions
but different objects were used and compared. For one experiment only joint
angles were recorded, for the other EMG signals were additionally integrated.
Task recognition was computed for both tasks. Observation state vectors with
augmented EMG signals were able to completely identify differences across
tasks, while the baseline method failed every time. Integrating EMG signals
into collaborative tasks significantly increases the ability of the system to
recognize nuances in the tasks that are otherwise imperceptible, up to 74.6% in
our studies. Furthermore, the integration of EMG signals for collaboration also
opens the door to a wide class of human-robot physical interactions based on
haptic communication that has been largely unexploited in the field.Comment: 7 pages, 2 figures, 2 tables. As submitted to Humanoids 201
Business Case and Technology Analysis for 5G Low Latency Applications
A large number of new consumer and industrial applications are likely to
change the classic operator's business models and provide a wide range of new
markets to enter. This article analyses the most relevant 5G use cases that
require ultra-low latency, from both technical and business perspectives. Low
latency services pose challenging requirements to the network, and to fulfill
them operators need to invest in costly changes in their network. In this
sense, it is not clear whether such investments are going to be amortized with
these new business models. In light of this, specific applications and
requirements are described and the potential market benefits for operators are
analysed. Conclusions show that operators have clear opportunities to add value
and position themselves strongly with the increasing number of services to be
provided by 5G.Comment: 18 pages, 5 figure
Congestion Control for Network-Aware Telehaptic Communication
Telehaptic applications involve delay-sensitive multimedia communication
between remote locations with distinct Quality of Service (QoS) requirements
for different media components. These QoS constraints pose a variety of
challenges, especially when the communication occurs over a shared network,
with unknown and time-varying cross-traffic. In this work, we propose a
transport layer congestion control protocol for telehaptic applications
operating over shared networks, termed as dynamic packetization module (DPM).
DPM is a lossless, network-aware protocol which tunes the telehaptic
packetization rate based on the level of congestion in the network. To monitor
the network congestion, we devise a novel network feedback module, which
communicates the end-to-end delays encountered by the telehaptic packets to the
respective transmitters with negligible overhead. Via extensive simulations, we
show that DPM meets the QoS requirements of telehaptic applications over a wide
range of network cross-traffic conditions. We also report qualitative results
of a real-time telepottery experiment with several human subjects, which reveal
that DPM preserves the quality of telehaptic activity even under heavily
congested network scenarios. Finally, we compare the performance of DPM with
several previously proposed telehaptic communication protocols and demonstrate
that DPM outperforms these protocols.Comment: 25 pages, 19 figure
Communicating with Humans and Robots: A Motion Tracking Data Glove for Enhanced Support of Deafblind
In this work, we discuss the design and development of a communication system for enhanced support of the deafblind. The system is based on an advanced motion tracking Data Glove that allows for high fidelity determination of finger postures with consequent identification of the basic Malossi alphabet signs. A natural, easy-to-master alphabet extension that supports single-hand signing without touch surface sensing is described, and different scenarios for its use are discussed. The focus is on using the extended Malossi alphabet as a communication medium in a Data Glove-based interface for remote messaging and interactive control of mobile robots. This may be of particular interest to the deafblind community, where distant communications and robotized support and services are rising. The designed Data Glove-based communication interface requires minimal adjustments to the Malossi alphabet and can be mastered after a short training period. The natural interaction style supported by the Data Glove and the popularity of the Malossi alphabet among the deafblind should greatly facilitate the wider adoption of the developed interface
Resolving conflicts during human-robot co-manipulation
UK Research and Innovation, UKRI: EP/S033718/2, EP/T022493/1, EP/V00784XThis work is partially funded by UKRI and CHIST-ERA (HEAP: EP/S033718/2; Horizon: EP/T022493/1; TAS Hub: EP/V00784X).This paper proposes a machine learning (ML) approach to detect and resolve motion conflicts that occur between a human and a proactive robot during the execution of a physically collaborative task. We train a random forest classifier to distinguish between harmonious and conflicting human-robot interaction behaviors during object co-manipulation. Kinesthetic information generated through the teamwork is used to describe the interactive quality of collaboration. As such, we demonstrate that features derived from haptic (force/torque) data are sufficient to classify if the human and the robot harmoniously manipulate the object or they face a conflict. A conflict resolution strategy is implemented to get the robotic partner to proactively contribute to the task via online trajectory planning whenever interactive motion patterns are harmonious, and to follow the human lead when a conflict is detected. An admittance controller regulates the physical interaction between the human and the robot during the task. This enables the robot to follow the human passively when there is a conflict. An artificial potential field is used to proactively control the robot motion when partners work in harmony. An experimental study is designed to create scenarios involving harmonious and conflicting interactions during collaborative manipulation of an object, and to create a dataset to train and test the random forest classifier. The results of the study show that ML can successfully detect conflicts and the proposed conflict resolution mechanism reduces human force and effort significantly compared to the case of a passive robot that always follows the human partner and a proactive robot that cannot resolve conflicts. © 2023 Copyright is held by the owner/author(s).2-s2.0-8515037875
A white paper: NASA virtual environment research, applications, and technology
Research support for Virtual Environment technology development has been a part of NASA's human factors research program since 1985. Under the auspices of the Office of Aeronautics and Space Technology (OAST), initial funding was provided to the Aerospace Human Factors Research Division, Ames Research Center, which resulted in the origination of this technology. Since 1985, other Centers have begun using and developing this technology. At each research and space flight center, NASA missions have been major drivers of the technology. This White Paper was the joint effort of all the Centers which have been involved in the development of technology and its applications to their unique missions. Appendix A is the list of those who have worked to prepare the document, directed by Dr. Cynthia H. Null, Ames Research Center, and Dr. James P. Jenkins, NASA Headquarters. This White Paper describes the technology and its applications in NASA Centers (Chapters 1, 2 and 3), the potential roles it can take in NASA (Chapters 4 and 5), and a roadmap of the next 5 years (FY 1994-1998). The audience for this White Paper consists of managers, engineers, scientists and the general public with an interest in Virtual Environment technology. Those who read the paper will determine whether this roadmap, or others, are to be followed
- …