Evaluation of haptic guidance virtual fixtures and 3D visualization methods in telemanipulation—a user study

© 2019, The Author(s). This work presents a user-study evaluation of various visual and haptic feedback modes on a real telemanipulation platform. Of particular interest is the potential for haptic guidance virtual fixtures and 3D-mapping techniques to enhance efficiency and awareness in a simple teleoperated valve turn task. An RGB-Depth camera is used to gather real-time color and geometric data of the remote scene, and the operator is presented with either a monocular color video stream, a 3D-mapping voxel representation of the remote scene, or the ability to place a haptic guidance virtual fixture to help complete the telemanipulation task. The efficacy of the feedback modes is then explored experimentally through a user study, and the different modes are compared on the basis of objective and subjective metrics. Despite the simplistic task and numerous evaluation metrics, results show that the haptic virtual fixture resulted in significantly better collision avoidance compared to 3D visualization alone. Anticipated performance enhancements were also observed moving from 2D to 3D visualization. Remaining comparisons lead to exploratory inferences that inform future direction for focused and statistically significant studies

Autonomy Infused Teleoperation with Application to BCI Manipulation

Robot teleoperation systems face a common set of challenges including latency, low-dimensional user commands, and asymmetric control inputs. User control with Brain-Computer Interfaces (BCIs) exacerbates these problems through especially noisy and erratic low-dimensional motion commands due to the difficulty in decoding neural activity. We introduce a general framework to address these challenges through a combination of computer vision, user intent inference, and arbitration between the human input and autonomous control schemes. Adjustable levels of assistance allow the system to balance the operator's capabilities and feelings of comfort and control while compensating for a task's difficulty. We present experimental results demonstrating significant performance improvement using the shared-control assistance framework on adapted rehabilitation benchmarks with two subjects implanted with intracortical brain-computer interfaces controlling a seven degree-of-freedom robotic manipulator as a prosthetic. Our results further indicate that shared assistance mitigates perceived user difficulty and even enables successful performance on previously infeasible tasks. We showcase the extensibility of our architecture with applications to quality-of-life tasks such as opening a door, pouring liquids from containers, and manipulation with novel objects in densely cluttered environments

Haptic guidance for microrobotic intracellular injection

The ability for a bio-operator to utilise a haptic device to manipulate a microrobot for intracellular injection offers immense benefits. One significant benefit is for the bio-operator to receive haptic guidance while performing the injection process. In order to address this, this paper investigates the use of haptic virtual fixtures for cell injection and proposes a novel force field virtual fixture. The guidance force felt by the bio-operator is determined by force field analysis within the virtual fixture. The proposed force field virtual fixture assists the bio-operator when performing intracellular injection by limiting the micropipette tip\u27s motion to a conical volume as well as recommending the desired path for optimal injection. A virtual fixture plane is also introduced to prevent the bio-operator from moving the micropipette tip beyond the deposition target inside the cell. Simulation results demonstrate the operation of the guidance system.<br /

Telelocomotion—remotely operated legged robots

© 2020 by the authors. Li-censee MDPI, Basel, Switzerland. Teleoperated systems enable human control of robotic proxies and are particularly amenable to inaccessible environments unsuitable for autonomy. Examples include emergency response, underwater manipulation, and robot assisted minimally invasive surgery. However, teleoperation architectures have been predominantly employed in manipulation tasks, and are thus only useful when the robot is within reach of the task. This work introduces the idea of extending teleoperation to enable online human remote control of legged robots, or telelocomotion, to traverse challenging terrain. Traversing unpredictable terrain remains a challenge for autonomous legged locomotion, as demonstrated by robots commonly falling in high-profile robotics contests. Telelocomotion can reduce the risk of mission failure by leveraging the high-level understanding of human operators to command in real-time the gaits of legged robots. In this work, a haptic telelocomotion interface was developed. Two within-user studies validate the proof-of-concept interface: (i) The first compared basic interfaces with the haptic interface for control of a simulated hexapedal robot in various levels of traversal complexity; (ii) the second presents a physical implementation and investigated the efficacy of the proposed haptic virtual fixtures. Results are promising to the use of haptic feedback for telelocomotion for complex traversal tasks

Robot Autonomy for Surgery

Autonomous surgery involves having surgical tasks performed by a robot operating under its own will, with partial or no human involvement. There are several important advantages of automation in surgery, which include increasing precision of care due to sub-millimeter robot control, real-time utilization of biosignals for interventional care, improvements to surgical efficiency and execution, and computer-aided guidance under various medical imaging and sensing modalities. While these methods may displace some tasks of surgical teams and individual surgeons, they also present new capabilities in interventions that are too difficult or go beyond the skills of a human. In this chapter, we provide an overview of robot autonomy in commercial use and in research, and present some of the challenges faced in developing autonomous surgical robots

Prevalence of haptic feedback in robot-mediated surgery : a systematic review of literature

© 2017 Springer-Verlag. This is a post-peer-review, pre-copyedit version of an article published in Journal of Robotic Surgery. The final authenticated version is available online at: https://doi.org/10.1007/s11701-017-0763-4With the successful uptake and inclusion of robotic systems in minimally invasive surgery and with the increasing application of robotic surgery (RS) in numerous surgical specialities worldwide, there is now a need to develop and enhance the technology further. One such improvement is the implementation and amalgamation of haptic feedback technology into RS which will permit the operating surgeon on the console to receive haptic information on the type of tissue being operated on. The main advantage of using this is to allow the operating surgeon to feel and control the amount of force applied to different tissues during surgery thus minimising the risk of tissue damage due to both the direct and indirect effects of excessive tissue force or tension being applied during RS. We performed a two-rater systematic review to identify the latest developments and potential avenues of improving technology in the application and implementation of haptic feedback technology to the operating surgeon on the console during RS. This review provides a summary of technological enhancements in RS, considering different stages of work, from proof of concept to cadaver tissue testing, surgery in animals, and finally real implementation in surgical practice. We identify that at the time of this review, while there is a unanimous agreement regarding need for haptic and tactile feedback, there are no solutions or products available that address this need. There is a scope and need for new developments in haptic augmentation for robot-mediated surgery with the aim of improving patient care and robotic surgical technology further.Peer reviewe

Haptics in Robot-Assisted Surgery: Challenges and Benefits

Robotic surgery is transforming the current surgical practice, not only by improving the conventional surgical methods but also by introducing innovative robot-enhanced approaches that broaden the capabilities of clinicians. Being mainly of man-machine collaborative type, surgical robots are seen as media that transfer pre- and intra-operative information to the operator and reproduce his/her motion, with appropriate filtering, scaling, or limitation, to physically interact with the patient. The field, however, is far from maturity and, more critically, is still a subject of controversy in medical communities. Limited or absent haptic feedback is reputed to be among reasons that impede further spread of surgical robots. In this paper objectives and challenges of deploying haptic technologies in surgical robotics is discussed and a systematic review is performed on works that have studied the effects of providing haptic information to the users in major branches of robotic surgery. It has been tried to encompass both classical works and the state of the art approaches, aiming at delivering a comprehensive and balanced survey both for researchers starting their work in this field and for the experts

Haptic microrobotic intracellular injection assistance using virtual fixtures

In manual cell injection the operator relies completely on visual information for task feedback and is subject to extended training times as well as poor success rates and repeatability. From this perspective, enhancing human-in-the-loop intracellular injection through haptic interaction offers significant benefits. This paper outlines two haptic virtual fixtures aiming to assist the human operator while performing cell injection. The first haptic virtual fixture is a parabolic force field designed to assist the operator in guiding the micropipette\u27s tip to a desired penetration point on the cell\u27s surface. The second is a planar virtual fixture which attempts to assist the operator from moving the micropipette\u27s tip beyond the deposition target location inside the cell. Preliminary results demonstrate the operation of the haptically assisted microrobotic cell injection system

Vision based virtual fixture generation for teleoperated robotic manipulation

In this paper we present a vision-based system for online virtual fixture generation suitable for manipulation tasks using remote controlled robots. This system makes use of a stereo camera system which provides accurate pose estimation of parts within the surrounding environment of the robot using features detection algorithms. The proposed approach is suitable for fast adaptation of the teleoperation system to different manipulation tasks without the need of tedious reimplementation of virtual constraints. Our main goal is to improve the efficiency of bilateral teleoperation systems by reducing the human operator effort in programming the system. In fact, using this method virtual guidances do not need to be programmed a priori but they can be instead dynamically generated on-the-fly and updated at any time making, in the end, the system suitable for any unstructured environment. In addition, this methodology is easily adaptable to any kind of teleoperation system since it is independent from the used master/slave robots. In order to validate our approach we performed a series of experiments in an emulated industrial scenario. We show how through the use of our approach a generic telemanipulation task can be easily accomplished without influencing the transparency of the system