Kompetensi pembimbing syarikat bertauliah Sistem Latihan Dual Nasional (SLDN)

Sistem Latihan Dual Nasional (SLDN) merupakan satu sistem latihan dan usahasama antara sektor awam dan sektor swasta dilaksanakan untuk melahirkan tenaga mahir k-worker selari dengan keperluan industri masa kini untuk membangunkan ekonomi negara. Pihak kerajaan dan syarikat swasta menaja pekerja pilihan mereka sebagai pelatih dalam sistem latihan ini bagi mempertingkatkan kebolehan pekerja mereka. Selain itu, pelatih juga terdiri daripada pelajar yang tidak dapat melanjutkan pelajaran ke mana-mana institusi pengajian tinggi awam mahupun swasta. Sistem ini menjalankan pendekatan day release iaitu pelatih menjalani latihan selama empat hari di industri dan satu hari di institusi latihan atau block release iaitu pelatih menjalani latihan kemahiran di industri empat bulan dan satu bulan di institusi latihan mengikut kesesuaian industri tersebut. Kajian berbentuk deskriptif dijalankan untuk melihat melihat tahap kompetensi pembimbing SLDN. Selain itu juga, kajian ini dijalankan bagi melihat perbezaan terhadap tahap pengetahuan, kemahiran dan sikap pembimbing SLDN berdasarkan jantina. Kajian ini juga dibuat bagi menentukan hubungan kompetensi pembimbing berdasarkan pengalaman bekerja. Penyelidikan tinjauan deskriptif ini menggunakan borang soal selidik sebagai instrumen kajian berskala Likert. Seramai 84 orang responden yang terdiri daripada pembimbing syarikat bertauliah SLDN terlibat di dalam kajian ini. Data dianalisis menggunakan SPSS versi 16.0. Hasil analisis mendapati pembimbing mempunyai pengetahuan yang tinggi di samping kemahiran dan sikap. Keputusan inferensi pula menunjukkan tidak terdapat perbezaan antara tahap pengetahuan, kemahiran dan sikap pembimbing berdasarkan jantina manakala analisis korelasi Pearson menunjukkan tidak terdapat hubungan antara kompetensi pembimbing berdasarkan pengalaman bekerja

X-ray scattering from surfaces: discrete and continuous components of roughness

Incoherent surface scattering yields a statistical description of the surface, due to the ensemble averaging over many independently sampled volumes. Depending on the state of the surface and direction of the scattering vector relative to the surface normal, the height distribution is discrete, continuous, or a combination of the two. We present a treatment for the influence of multimodal surface height distributions on Crystal Truncation Rod scattering. The effects of a multimodal height distribution are especially evident during in situ monitoring of layer-by-layer thin-film growth via Pulsed Laser Deposition. We model the total height distribution as a convolution of discrete and continuous components, resulting in a broadly applicable parameterization of surface roughness which can be applied to other scattering probes, such as electrons and neutrons. Convolution of such distributions could potentially be applied to interface or chemical scattering. Here we find that this analysis describes accurately our experimental studies of SrTiO3 annealing and homoepitaxial growth.Comment: 15 pages, 7 figure

DEM investigation of the influence of particulate properties and operating conditions on the mixing process in rotary drums: Part 1-Determination of the DEM parameters and calibration process

This paper's goal was to select methods and a calibration procedure which would lead to the determination of relevant parameters of a discrete element method (DEM) and virtual material creation. Seven particulates were selected with respect to their shape (spherical and non-spherical), size and density. The first calibration experiment involved "packing test" to determine the shape accuracy and bulk density of virtual packed particulates. The series of simulations were compared with real experiments, and the size, shape and density of virtual particles were optimized. Using three apparatuses, the input parameter values were experimentally determined for a contact model that defines the behavior of particulates in DEM simulations. The research part of the paper examines the influence of factors such as particle number; pile formation method; and the method of evaluation of the angle of repose on the process of the calibration of virtual material. The most reproducible results were achieved by the "pilling" method and by the rotating drum-both evaluated by the geometric method. However, it is always advisable to make an overall visual comparison of the slope shape between the calibration simulation and the experimental curves. The bowl's diameter to particle size ratio should be greater than 25, and the calibration experiment should contain approximately 4000 particles to ensure representative results during angle of repose calibration experiment.Web of Science82art. no. 22

A dynamics-driven approach to precision machines design for micro-manufacturing and its implementation perspectives

Precision machines are essential elements in fabricating high quality micro products or micro features and directly affect the machining accuracy, repeatability and efficiency. There are a number of literatures on the design of industrial machine elements and a couple of precision machines commercially available. However, few researchers have systematically addressed the design of precision machines from the dynamics point of view. In this paper, the design issues of precision machines are presented with particular emphasis on the dynamics aspects as the major factors affecting the performance of the precision machines and machining processes. This paper begins with a brief review of the design principles of precision machines with emphasis on machining dynamics. Then design processes of precision machines are discussed, and followed by a practical modelling and simulation approaches. Two case studies are provided including the design and analysis of a fast tool servo system and a 5-axis bench-top micro-milling machine respectively. The design and analysis used in the two case studies are formulated based on the design methodology and guidelines

State-of-the-art in aerodynamic shape optimisation methods

Aerodynamic optimisation has become an indispensable component for any aerodynamic design over the past 60 years, with applications to aircraft, cars, trains, bridges, wind turbines, internal pipe flows, and cavities, among others, and is thus relevant in many facets of technology. With advancements in computational power, automated design optimisation procedures have become more competent, however, there is an ambiguity and bias throughout the literature with regards to relative performance of optimisation architectures and employed algorithms. This paper provides a well-balanced critical review of the dominant optimisation approaches that have been integrated with aerodynamic theory for the purpose of shape optimisation. A total of 229 papers, published in more than 120 journals and conference proceedings, have been classified into 6 different optimisation algorithm approaches. The material cited includes some of the most well-established authors and publications in the field of aerodynamic optimisation. This paper aims to eliminate bias toward certain algorithms by analysing the limitations, drawbacks, and the benefits of the most utilised optimisation approaches. This review provides comprehensive but straightforward insight for non-specialists and reference detailing the current state for specialist practitioners