Incorporating Modular Arrangement of Predetermined Time Standard with a Wearable Sensing Glove

“Performance” – a common watchword in the present age, and that which is optimized through the most functional methodology of investigating the work procedure. This encompassed the auditing, updating of the tasks, while at the same time, applied automation and mechanization. The Modular Arrangement of Predetermined Time Standard (MODAPTS) is a useful application of a work measurement technique that allow a greater variety of work for manufacturing, engineering, and administrative service activities to be measured quickly with ease and accuracy. The MODAPTS, however, made it extremely difficult for engineers to use because it required an ample amount of time to analyze and code the raw data. A new design was proposed to help resolve the conventional system\u27s inadequacy because in MODAPTS, each task cycle of a minute required about 2 hours to calculate and document, and also, the judgment of the analysts varied for the same task. This study aimed to reduce the time taken for the traditional MODAPTS documentation usually took and produced unified results by integrating MODAPTS with a Sensing Wearable Glove while maintaining the same performance. The objective was to introduce an easy, cost-effective solution, and to compare the accuracy of coding between manual and automated calculated MODAPTS while maintaining consistent performance. This study discusses the glove and accompanying software design that detected movements using flex sensors, gyroscopes, microcontrollers, and pressure sensors. These movements were translated into analog data used to create MODAPTS codes as an output, which then sent the data wirelessly using the Bluetooth module. The device designed in this study is capable of sensing gestures for various operations, and the traditional method was compared to the proposed method. This was in turn, validated using the two-way ANOVA analysis. It was observed that the sensor-based glove provided efficient and reliable results, just like the traditional method results while maintaining the same performance

Blending the Material and Digital World for Hybrid Interfaces

The development of digital technologies in the 21st century is progressing continuously and new device classes such as tablets, smartphones or smartwatches are finding their way into our everyday lives. However, this development also poses problems, as these prevailing touch and gestural interfaces often lack tangibility, take little account of haptic qualities and therefore require full attention from their users. Compared to traditional tools and analog interfaces, the human skills to experience and manipulate material in its natural environment and context remain unexploited. To combine the best of both, a key question is how it is possible to blend the material world and digital world to design and realize novel hybrid interfaces in a meaningful way. Research on Tangible User Interfaces (TUIs) investigates the coupling between physical objects and virtual data. In contrast, hybrid interfaces, which specifically aim to digitally enrich analog artifacts of everyday work, have not yet been sufficiently researched and systematically discussed. Therefore, this doctoral thesis rethinks how user interfaces can provide useful digital functionality while maintaining their physical properties and familiar patterns of use in the real world. However, the development of such hybrid interfaces raises overarching research questions about the design: Which kind of physical interfaces are worth exploring? What type of digital enhancement will improve existing interfaces? How can hybrid interfaces retain their physical properties while enabling new digital functions? What are suitable methods to explore different design? And how to support technology-enthusiast users in prototyping? For a systematic investigation, the thesis builds on a design-oriented, exploratory and iterative development process using digital fabrication methods and novel materials. As a main contribution, four specific research projects are presented that apply and discuss different visual and interactive augmentation principles along real-world applications. The applications range from digitally-enhanced paper, interactive cords over visual watch strap extensions to novel prototyping tools for smart garments. While almost all of them integrate visual feedback and haptic input, none of them are built on rigid, rectangular pixel screens or use standard input modalities, as they all aim to reveal new design approaches. The dissertation shows how valuable it can be to rethink familiar, analog applications while thoughtfully extending them digitally. Finally, this thesis’ extensive work of engineering versatile research platforms is accompanied by overarching conceptual work, user evaluations and technical experiments, as well as literature reviews.Die Durchdringung digitaler Technologien im 21. Jahrhundert schreitet stetig voran und neue Geräteklassen wie Tablets, Smartphones oder Smartwatches erobern unseren Alltag. Diese Entwicklung birgt aber auch Probleme, denn die vorherrschenden berührungsempfindlichen Oberflächen berücksichtigen kaum haptische Qualitäten und erfordern daher die volle Aufmerksamkeit ihrer Nutzer:innen. Im Vergleich zu traditionellen Werkzeugen und analogen Schnittstellen bleiben die menschlichen Fähigkeiten ungenutzt, die Umwelt mit allen Sinnen zu begreifen und wahrzunehmen. Um das Beste aus beiden Welten zu vereinen, stellt sich daher die Frage, wie neuartige hybride Schnittstellen sinnvoll gestaltet und realisiert werden können, um die materielle und die digitale Welt zu verschmelzen. In der Forschung zu Tangible User Interfaces (TUIs) wird die Verbindung zwischen physischen Objekten und virtuellen Daten untersucht. Noch nicht ausreichend erforscht wurden hingegen hybride Schnittstellen, die speziell darauf abzielen, physische Gegenstände des Alltags digital zu erweitern und anhand geeigneter Designparameter und Entwurfsräume systematisch zu untersuchen. In dieser Dissertation wird daher untersucht, wie Materialität und Digitalität nahtlos ineinander übergehen können. Es soll erforscht werden, wie künftige Benutzungsschnittstellen nützliche digitale Funktionen bereitstellen können, ohne ihre physischen Eigenschaften und vertrauten Nutzungsmuster in der realen Welt zu verlieren. Die Entwicklung solcher hybriden Ansätze wirft jedoch übergreifende Forschungsfragen zum Design auf: Welche Arten von physischen Schnittstellen sind es wert, betrachtet zu werden? Welche Art von digitaler Erweiterung verbessert das Bestehende? Wie können hybride Konzepte ihre physischen Eigenschaften beibehalten und gleichzeitig neue digitale Funktionen ermöglichen? Was sind geeignete Methoden, um verschiedene Designs zu erforschen? Wie kann man Technologiebegeisterte bei der Erstellung von Prototypen unterstützen? Für eine systematische Untersuchung stützt sich die Arbeit auf einen designorientierten, explorativen und iterativen Entwicklungsprozess unter Verwendung digitaler Fabrikationsmethoden und neuartiger Materialien. Im Hauptteil werden vier Forschungsprojekte vorgestellt, die verschiedene visuelle und interaktive Prinzipien entlang realer Anwendungen diskutieren. Die Szenarien reichen von digital angereichertem Papier, interaktiven Kordeln über visuelle Erweiterungen von Uhrarmbändern bis hin zu neuartigen Prototyping-Tools für intelligente Kleidungsstücke. Um neue Designansätze aufzuzeigen, integrieren nahezu alle visuelles Feedback und haptische Eingaben, um Alternativen zu Standard-Eingabemodalitäten auf starren Pixelbildschirmen zu schaffen. Die Dissertation hat gezeigt, wie wertvoll es sein kann, bekannte, analoge Anwendungen zu überdenken und sie dabei gleichzeitig mit Bedacht digital zu erweitern. Dabei umfasst die vorliegende Arbeit sowohl realisierte technische Forschungsplattformen als auch übergreifende konzeptionelle Arbeiten, Nutzerstudien und technische Experimente sowie die Analyse existierender Forschungsarbeiten

Proceedings of the 3rd IUI Workshop on Interacting with Smart Objects

These are the Proceedings of the 3rd IUI Workshop on Interacting with Smart Objects. Objects that we use in our everyday life are expanding their restricted interaction capabilities and provide functionalities that go far beyond their original functionality. They feature computing capabilities and are thus able to capture information, process and store it and interact with their environments, turning them into smart objects

Portuguese sign language recognition via computer vision and depth sensor

Sign languages are used worldwide by a multitude of individuals. They are mostly used by the deaf communities and their teachers, or people associated with them by ties of friendship or family. Speakers are a minority of citizens, often segregated, and over the years not much attention has been given to this form of communication, even by the scientific community. In fact, in Computer Science there is some, but limited, research and development in this area. In the particular case of sign Portuguese Sign Language-PSL that fact is more evident and, to our knowledge there isn’t yet an efficient system to perform the automatic recognition of PSL signs. With the advent and wide spreading of devices such as depth sensors, there are new possibilities to address this problem. In this thesis, we have specified, developed, tested and preliminary evaluated, solutions that we think will bring valuable contributions to the problem of Automatic Gesture Recognition, applied to Sign Languages, such as the case of Portuguese Sign Language. In the context of this work, Computer Vision techniques were adapted to the case of Depth Sensors. A proper gesture taxonomy for this problem was proposed, and techniques for feature extraction, representation, storing and classification were presented. Two novel algorithms to solve the problem of real-time recognition of isolated static poses were specified, developed, tested and evaluated. Two other algorithms for isolated dynamic movements for gesture recognition (one of them novel), have been also specified, developed, tested and evaluated. Analyzed results compare well with the literature.As Línguas Gestuais são utilizadas em todo o Mundo por uma imensidão de indivíduos. Trata-se na sua grande maioria de surdos e/ou mudos, ou pessoas a eles associados por laços familiares de amizade ou professores de Língua Gestual. Tratando-se de uma minoria, muitas vezes segregada, não tem vindo a ser dada ao longo dos anos pela comunidade científica, a devida atenção a esta forma de comunicação. Na área das Ciências da Computação existem alguns, mas poucos trabalhos de investigação e desenvolvimento. No caso particular da Língua Gestual Portuguesa - LGP esse facto é ainda mais evidente não sendo nosso conhecimento a existência de um sistema eficaz e efetivo para fazer o reconhecimento automático de gestos da LGP. Com o aparecimento ou massificação de dispositivos, tais como sensores de profundidade, surgem novas possibilidades para abordar este problema. Nesta tese, foram especificadas, desenvolvidas, testadas e efectuada a avaliação preliminar de soluções que acreditamos que trarão valiosas contribuições para o problema do Reconhecimento Automático de Gestos, aplicado às Línguas Gestuais, como é o caso da Língua Gestual Portuguesa. Foram adaptadas técnicas de Visão por Computador ao caso dos Sensores de Profundidade. Foi proposta uma taxonomia adequada ao problema, e apresentadas técnicas para a extração, representação e armazenamento de características. Foram especificados, desenvolvidos, testados e avaliados dois algoritmos para resolver o problema do reconhecimento em tempo real de poses estáticas isoladas. Foram também especificados, desenvolvidos, testados e avaliados outros dois algoritmos para o Reconhecimento de Movimentos Dinâmicos Isolados de Gestos(um deles novo).Os resultados analisados são comparáveis à literatura.Las lenguas de Signos se utilizan en todo el Mundo por una multitud de personas. En su mayoría son personas sordas y/o mudas, o personas asociadas con ellos por vínculos de amistad o familiares y profesores de Lengua de Signos. Es una minoría de personas, a menudo segregadas, y no se ha dado en los últimos años por la comunidad científica, la atención debida a esta forma de comunicación. En el área de Ciencias de la Computación hay alguna pero poca investigación y desarrollo. En el caso particular de la Lengua de Signos Portuguesa - LSP, no es de nuestro conocimiento la existencia de un sistema eficiente y eficaz para el reconocimiento automático. Con la llegada en masa de dispositivos tales como Sensores de Profundidad, hay nuevas posibilidades para abordar el problema del Reconocimiento de Gestos. En esta tesis se han especificado, desarrollado, probado y hecha una evaluación preliminar de soluciones, aplicada a las Lenguas de Signos como el caso de la Lengua de Signos Portuguesa - LSP. Se han adaptado las técnicas de Visión por Ordenador para el caso de los Sensores de Profundidad. Se propone una taxonomía apropiada para el problema y se presentan técnicas para la extracción, representación y el almacenamiento de características. Se desarrollaran, probaran, compararan y analizan los resultados de dos nuevos algoritmos para resolver el problema del Reconocimiento Aislado y Estático de Posturas. Otros dos algoritmos (uno de ellos nuevo) fueran también desarrollados, probados, comparados y analizados los resultados, para el Reconocimiento de Movimientos Dinámicos Aislados de los Gestos

Capacitive Sensing and Communication for Ubiquitous Interaction and Environmental Perception

During the last decade, the functionalities of electronic devices within a living environment constantly increased. Besides the personal computer, now tablet PCs, smart household appliances, and smartwatches enriched the technology landscape. The trend towards an ever-growing number of computing systems has resulted in many highly heterogeneous human-machine interfaces. Users are forced to adapt to technology instead of having the technology adapt to them. Gathering context information about the user is a key factor for improving the interaction experience. Emerging wearable devices show the benefits of sophisticated sensors which make interaction more efficient, natural, and enjoyable. However, many technologies still lack of these desirable properties, motivating me to work towards new ways of sensing a user's actions and thus enriching the context. In my dissertation I follow a human-centric approach which ranges from sensing hand movements to recognizing whole-body interactions with objects. This goal can be approached with a vast variety of novel and existing sensing approaches. I focused on perceiving the environment with quasi-electrostatic fields by making use of capacitive coupling between devices and objects. Following this approach, it is possible to implement interfaces that are able to recognize gestures, body movements and manipulations of the environment at typical distances up to 50cm. These sensors usually have a limited resolution and can be sensitive to other conductive objects or electrical devices that affect electric fields. The technique allows for designing very energy-efficient and high-speed sensors that can be deployed unobtrusively underneath any kind of non-conductive surface. Compared to other sensing techniques, exploiting capacitive coupling also has a low impact on a user's perceived privacy. In this work, I also aim at enhancing the interaction experience with new perceptional capabilities based on capacitive coupling. I follow a bottom-up methodology and begin by presenting two low-level approaches for environmental perception. In order to perceive a user in detail, I present a rapid prototyping toolkit for capacitive proximity sensing. The prototyping toolkit shows significant advancements in terms of temporal and spatial resolution. Due to some limitations, namely the inability to determine the identity and fine-grained manipulations of objects, I contribute a generic method for communications based on capacitive coupling. The method allows for designing highly interactive systems that can exchange information through air and the human body. I furthermore show how human body parts can be recognized from capacitive proximity sensors. The method is able to extract multiple object parameters and track body parts in real-time. I conclude my thesis with contributions in the domain of context-aware devices and explicit gesture-recognition systems

Pervasive Quantied-Self using Multiple Sensors

abstract: The advent of commercial inexpensive sensors and the advances in information and communication technology (ICT) have brought forth the era of pervasive Quantified-Self. Automatic diet monitoring is one of the most important aspects for Quantified-Self because it is vital for ensuring the well-being of patients suffering from chronic diseases as well as for providing a low cost means for maintaining the health for everyone else. Automatic dietary monitoring consists of: a) Determining the type and amount of food intake, and b) Monitoring eating behavior, i.e., time, frequency, and speed of eating. Although there are some existing techniques towards these ends, they suffer from issues of low accuracy and low adherence. To overcome these issues, multiple sensors were utilized because the availability of affordable sensors that can capture the different aspect information has the potential for increasing the available knowledge for Quantified-Self. For a), I envision an intelligent dietary monitoring system that automatically identifies food items by using the knowledge obtained from visible spectrum camera and infrared spectrum camera. This system is able to outperform the state-of-the-art systems for cooked food recognition by 25% while also minimizing user intervention. For b), I propose a novel methodology, IDEA that performs accurate eating action identification within eating episodes with an average F1-score of 0.92. This is an improvement of 0.11 for precision and 0.15 for recall for the worst-case users as compared to the state-of-the-art. IDEA uses only a single wrist-band which includes four sensors and provides feedback on eating speed every 2 minutes without obtaining any manual input from the user.Dissertation/ThesisDoctoral Dissertation Computer Engineering 201

LifeLogging: personal big data

We have recently observed a convergence of technologies to foster the emergence of lifelogging as a mainstream activity. Computer storage has become significantly cheaper, and advancements in sensing technology allows for the efficient sensing of personal activities, locations and the environment. This is best seen in the growing popularity of the quantified self movement, in which life activities are tracked using wearable sensors in the hope of better understanding human performance in a variety of tasks. This review aims to provide a comprehensive summary of lifelogging, to cover its research history, current technologies, and applications. Thus far, most of the lifelogging research has focused predominantly on visual lifelogging in order to capture life details of life activities, hence we maintain this focus in this review. However, we also reflect on the challenges lifelogging poses to an information retrieval scientist. This review is a suitable reference for those seeking a information retrieval scientist’s perspective on lifelogging and the quantified self

Enhanced Virtuality: Increasing the Usability and Productivity of Virtual Environments

Mit stetig steigender Bildschirmauflösung, genauerem Tracking und fallenden Preisen stehen Virtual Reality (VR) Systeme kurz davor sich erfolgreich am Markt zu etablieren. Verschiedene Werkzeuge helfen Entwicklern bei der Erstellung komplexer Interaktionen mit mehreren Benutzern innerhalb adaptiver virtueller Umgebungen. Allerdings entstehen mit der Verbreitung der VR-Systeme auch zusätzliche Herausforderungen: Diverse Eingabegeräte mit ungewohnten Formen und Tastenlayouts verhindern eine intuitive Interaktion. Darüber hinaus zwingt der eingeschränkte Funktionsumfang bestehender Software die Nutzer dazu, auf herkömmliche PC- oder Touch-basierte Systeme zurückzugreifen. Außerdem birgt die Zusammenarbeit mit anderen Anwendern am gleichen Standort Herausforderungen hinsichtlich der Kalibrierung unterschiedlicher Trackingsysteme und der Kollisionsvermeidung. Beim entfernten Zusammenarbeiten wird die Interaktion durch Latenzzeiten und Verbindungsverluste zusätzlich beeinflusst. Schließlich haben die Benutzer unterschiedliche Anforderungen an die Visualisierung von Inhalten, z.B. Größe, Ausrichtung, Farbe oder Kontrast, innerhalb der virtuellen Welten. Eine strikte Nachbildung von realen Umgebungen in VR verschenkt Potential und wird es nicht ermöglichen, die individuellen Bedürfnisse der Benutzer zu berücksichtigen. Um diese Probleme anzugehen, werden in der vorliegenden Arbeit Lösungen in den Bereichen Eingabe, Zusammenarbeit und Erweiterung von virtuellen Welten und Benutzern vorgestellt, die darauf abzielen, die Benutzerfreundlichkeit und Produktivität von VR zu erhöhen. Zunächst werden PC-basierte Hardware und Software in die virtuelle Welt übertragen, um die Vertrautheit und den Funktionsumfang bestehender Anwendungen in VR zu erhalten. Virtuelle Stellvertreter von physischen Geräten, z.B. Tastatur und Tablet, und ein VR-Modus für Anwendungen ermöglichen es dem Benutzer reale Fähigkeiten in die virtuelle Welt zu übertragen. Des Weiteren wird ein Algorithmus vorgestellt, der die Kalibrierung mehrerer ko-lokaler VR-Geräte mit hoher Genauigkeit und geringen Hardwareanforderungen und geringem Aufwand ermöglicht. Da VR-Headsets die reale Umgebung der Benutzer ausblenden, wird die Relevanz einer Ganzkörper-Avatar-Visualisierung für die Kollisionsvermeidung und das entfernte Zusammenarbeiten nachgewiesen. Darüber hinaus werden personalisierte räumliche oder zeitliche Modifikationen vorgestellt, die es erlauben, die Benutzerfreundlichkeit, Arbeitsleistung und soziale Präsenz von Benutzern zu erhöhen. Diskrepanzen zwischen den virtuellen Welten, die durch persönliche Anpassungen entstehen, werden durch Methoden der Avatar-Umlenkung (engl. redirection) kompensiert. Abschließend werden einige der Methoden und Erkenntnisse in eine beispielhafte Anwendung integriert, um deren praktische Anwendbarkeit zu verdeutlichen. Die vorliegende Arbeit zeigt, dass virtuelle Umgebungen auf realen Fähigkeiten und Erfahrungen aufbauen können, um eine vertraute und einfache Interaktion und Zusammenarbeit von Benutzern zu gewährleisten. Darüber hinaus ermöglichen individuelle Erweiterungen des virtuellen Inhalts und der Avatare Einschränkungen der realen Welt zu überwinden und das Erlebnis von VR-Umgebungen zu steigern

Dynamic motion coupling of body movement for input control

Touchless gestures are used for input when touch is unsuitable or unavailable, such as when interacting with displays that are remote, large, public, or when touch is prohibited for hygienic reasons. Traditionally user input is spatially or semantically mapped to system output, however, in the context of touchless gestures these interaction principles suffer from several disadvantages including memorability, fatigue, and ill-defined mappings. This thesis investigates motion correlation as the third interaction principle for touchless gestures, which maps user input to system output based on spatiotemporal matching of reproducible motion. We demonstrate the versatility of motion correlation by using movement as the primary sensing principle, relaxing the restrictions on how a user provides input. Using TraceMatch, a novel computer vision-based system, we show how users can provide effective input through investigation of input performance with different parts of the body, and how users can switch modes of input spontaneously in realistic application scenarios. Secondly, spontaneous spatial coupling shows how motion correlation can bootstrap spatial input, allowing any body movement, or movement of tangible objects, to be appropriated for ad hoc touchless pointing on a per interaction basis. We operationalise the concept in MatchPoint, and demonstrate the unique capabilities through an exploration of the design space with application examples. Finally, we explore how users synchronise with moving targets in the context of motion correlation, revealing how simple harmonic motion leads to better synchronisation. Using the insights gained we explore the robustness of algorithms used for motion correlation, showing how it is possible to successfully detect a user's intent to interact whilst suppressing accidental activations from common spatial and semantic gestures. Finally, we look across our work to distil guidelines for interface design, and further considerations of how motion correlation can be used, both in general and for touchless gestures