904 research outputs found
Survey on wireless technology trade-offs for the industrial internet of things
Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment
Intelligent and Low Overhead Network Synchronization over Large-Scale Industrial Internet of Things Systems
With the extensive development of information and communication technologies and vertical industry applications, industrial IoT (IIoT) systems are expected to enable a wide variety of applications, including advanced manufacturing, networked control, and smart supply chain, which all exclusively hinge on the efficient cooperation and coordination among the involved IIoT machines and infrastructures. The ubiquitous connection among IIoT entities and the associated exchange of collaborative information necessitate the achievement of accurate network synchronization, which can guarantee the temporal alignment of the critical information. To enhance the temporal correlation of heterogeneous devices in large-scale IIoT systems, this thesis aims at designing industry-oriented network synchronization protocols in terms of accuracy improvement, resource-saving, and security enhancement with the assistance of learning-based methods.
Initially, the real-time timestamps and historical information of each IIoT devices are collected and analyzed to explore the varying rate of the skew (VRS) at each enclosed clock. K-means clustering algorithm is adopted to organize the distributed devices into a few groups, and each of them is assigned with an optimized synchronization frequency to avoid potential resource waste while ensuring synchronization accuracy. Historical VRS values are further utilized as the identification of each clock for providing verification information so that the security against message manipulation attacks during network synchronization can be enhanced.
Moreover, a digital twin-enabled clock model is established by comprehensively investigating the characteristics of each clock with diversified operating environments. A cloud-edge-collaborative system architecture is orchestrated to enhance the efficiency of data gathering and processing. With the assistance of the accurate estimation generated by the digital twin model for each clock, the situation-awareness of network synchronization is enhanced in terms of a better understanding of the clock feature and necessary synchronization frequency. Meanwhile, since temporal information generated at each local IIoT devices are efficiently gathered at the edge devices, the effect of packet delay variation is significantly reduced while the synchronization performance under various network conditions can be guaranteed.
To further reduce the network resource consumption and improvement the performance under abnormal behaviors during network synchronization, a passive network synchronization protocol based on concurrent observations is proposed, where timestamps are exchanged without occupying dedicated network resources during synchronization. The proposed scheme is established based on the fact that a group of IIoT devices close to each other can observe the same physical phenomena, e.g., electromagnetic signal radiation, almost simultaneously. Moreover, multiple relay nodes are coordinated by the cloud center to disseminate the reference time information throughout the IIoT system in accomplishing global network synchronization. Additionally, a principal component analysis-assisted outlier detection mechanism is designed to tackle untrustworthy timestamps in the network according to the historical observation instants recorded in the cloud center. Simulation results indicate that accurate network synchronization can be achieved with significantly reduced explicit interactions
Recommended from our members
Performance evaluation of information and communications technology infrastructure for smart distribution network applications
This thesis was submitted for the degree of Master of Philosophy and awarded by Brunel University.Current electrical networks require secure, scalable and cost-effective Information and
Communications Technology (ICT) solutions to facilitate the novel functionalities
required by Smart Grids. Countries around the globe are investigating alternative energy sources to mitigate the current energy crisis and environmental issues experienced by many countries due to global warming, rapid growth of population, inefficient energy management, dwindling fossil fuel resources, etc. Therefore, alternative or renewable energy sources, such as wind, solar, hydro, combined heat and power, etc., are required to mitigate such a crisis and such sources will also need to be integrated in to the power grid
in a distributed manner. Such distributed energy sources are mainly connected to the
distribution networks and introduce huge challenges to the distribution network operator (DNO). Many of these challenges cannot be dealt with effectively using existing network operation mechanisms therefore the research and development of novel ICT solutions to support smart distribution network operation is required.
This research investigated suitable ICT solutions to enable the Smart Grid to tackle these challenges and proposes ICT infrastructure models that can be used for simulation studies in order to investigate cost-effective, scalable and secure solutions for the DNOs. Initially, a Quality of Service (QoS) monitoring test-bed was proposed to evaluate the performance of bandwidth intensive applications, such as smart meter data transmission. Simulation studies for different communication technologies, cellular and Power Line
Communication (PLC), were also carried out and the simulation models were verified
using experimental test results. Finally, the modelling and analysis of smart metering
infrastructure was carried out using simulation and extensive studies were performed to evaluate the data transmission rate performance for different configurations of smart meters and concentrators
Integration of Clouds to Industrial Communication Networks
Cloud computing, owing to its ubiquitousness, scalability and on-demand ac- cess, has transformed into many traditional sectors, such as telecommunication and manufacturing production. As the Fifth Generation Wireless Specifica- tions (5G) emerges, the demand on ubiquitous and re-configurable computing resources for handling tremendous traffic from omnipresent mobile devices has been put forward. And therein lies the adaption of cloud-native model in service delivery of telecommunication networks. However, it takes phased approaches to successfully transform the traditional Telco infrastructure to a softwarized model, especially for Radio Access Networks (RANs), which, as of now, mostly relies on purpose-built Digital Signal Processors (DSPs) for computing and processing tasks.On the other hand, Industry 4.0 is leading the digital transformation in manufacturing sectors, wherein the industrial networks is evolving towards wireless connectivity and the automation process managements are shifting to clouds. However, such integration may introduce unwanted disturbances to critical industrial automation processes. This leads to challenges to guaran- tee the performance of critical applications under the integration of different systems.In the work presented in this thesis, we mainly explore the feasibility of inte- grating wireless communication, industrial networks and cloud computing. We have mainly investigated the delay-inhibited challenges and the performance impacts of using cloud-native models for critical applications. We design a solution, targeting at diminishing the performance degradation caused by the integration of cloud computing
A Comprehensive Survey of the Tactile Internet: State of the art and Research Directions
The Internet has made several giant leaps over the years, from a fixed to a
mobile Internet, then to the Internet of Things, and now to a Tactile Internet.
The Tactile Internet goes far beyond data, audio and video delivery over fixed
and mobile networks, and even beyond allowing communication and collaboration
among things. It is expected to enable haptic communication and allow skill set
delivery over networks. Some examples of potential applications are
tele-surgery, vehicle fleets, augmented reality and industrial process
automation. Several papers already cover many of the Tactile Internet-related
concepts and technologies, such as haptic codecs, applications, and supporting
technologies. However, none of them offers a comprehensive survey of the
Tactile Internet, including its architectures and algorithms. Furthermore, none
of them provides a systematic and critical review of the existing solutions. To
address these lacunae, we provide a comprehensive survey of the architectures
and algorithms proposed to date for the Tactile Internet. In addition, we
critically review them using a well-defined set of requirements and discuss
some of the lessons learned as well as the most promising research directions
- âŠ