752 research outputs found
Momentum Control of Humanoid Robots with Series Elastic Actuators
Humanoid robots may require a degree of compliance at the joint level for
improving efficiency, shock tolerance, and safe interaction with humans. The
presence of joint elasticity, however, complexifies the design of balancing and
walking controllers. This paper proposes a control framework for extending
momentum based controllers developed for stiff actuators to the case of series
elastic actuators. The key point is to consider the motor velocities as an
intermediate control input, and then apply high-gain control to stabilise the
desired motor velocities achieving momentum control. Simulations carried out on
a model of the robot iCub verify the soundness of the proposed approach
Torque-Controlled Stepping-Strategy Push Recovery: Design and Implementation on the iCub Humanoid Robot
One of the challenges for the robotics community is to deploy robots which
can reliably operate in real world scenarios together with humans. A crucial
requirement for legged robots is the capability to properly balance on their
feet, rejecting external disturbances. iCub is a state-of-the-art humanoid
robot which has only recently started to balance on its feet. While the current
balancing controller has proved successful in various scenarios, it still
misses the capability to properly react to strong pushes by taking steps. This
paper goes in this direction. It proposes and implements a control strategy
based on the Capture Point concept [1]. Instead of relying on position control,
like most of Capture Point related approaches, the proposed strategy generates
references for the momentum-based torque controller already implemented on the
iCub, thus extending its capabilities to react to external disturbances, while
retaining the advantages of torque control when interacting with the
environment. Experiments in the Gazebo simulator and on the iCub humanoid robot
validate the proposed strategy
Humanoid robot walking control on inclined planes
The humanoid bipedal structure is suitable for a assitive robot functioning in the human environment. However, the bipedal walk is a difficult control problem. Walking just on even floor is not satisfactory for the applicability of a humanoid robot. This paper presents a study on bipedal walk on inclined planes. A Zero Moment Point (ZMP) based reference generation technique is employed. The orientation of the feet is adjusted online by a fuzzy logic system to adapt to different walking surface slopes. This system uses a sampling time larger than the one of the joint space position controllers. The average value of the body pitch angle is used as the inputs to the fuzzy logic system. A foot pitch orientation compensator implemented independently for the two feet complements the fuzyy controller. A 12-degrees-of-freedom (DOF) biped robot model is used in the full-dynamics 3-D simulations. Simulations are carried out on even floor and inclined planes with different slopes. The results indicate that the control method presented is successful in enabling the robot to climb slopes of 8.5 degrees (15 percent grade)
Biped robot walking control on inclined planes with fuzzy parameter adaptation
The bipedal structure is suitable for a robot functioning in the human environment, and assuming assistive roles. However, the bipedal walk is a poses a difficult control problem. Walking on even floor is not satisfactory for the applicability of a humanoid robot. This paper presents a study on bipedal walk on inclined planes. A Zero Moment Point (ZMP) based reference generation technique is employed. The orientation of the upper body is adjusted online by a fuzzy logic system to adapt to different walking surface slopes. This system uses a sampling time larger than the one of the joint space position controllers. A newly defined measure of the oscillatory behavior of the body pitch angle and the average value of the pelvis pitch angle are used as inputs to the fuzzy adaptation system. A 12-degrees-of-freedom (DOF) biped robot model is used in the full-dynamics 3-D simulations. Simulations are carried out on even floor and inclined planes with different slopes. The results indicate that the fuzzy adaptation algorithms presented are successful in enabling the robot to climb slopes of 5.6 degrees (10 percent)
Momentum Control with Hierarchical Inverse Dynamics on a Torque-Controlled Humanoid
Hierarchical inverse dynamics based on cascades of quadratic programs have
been proposed for the control of legged robots. They have important benefits
but to the best of our knowledge have never been implemented on a torque
controlled humanoid where model inaccuracies, sensor noise and real-time
computation requirements can be problematic. Using a reformulation of existing
algorithms, we propose a simplification of the problem that allows to achieve
real-time control. Momentum-based control is integrated in the task hierarchy
and a LQR design approach is used to compute the desired associated closed-loop
behavior and improve performance. Extensive experiments on various balancing
and tracking tasks show very robust performance in the face of unknown
disturbances, even when the humanoid is standing on one foot. Our results
demonstrate that hierarchical inverse dynamics together with momentum control
can be efficiently used for feedback control under real robot conditions.Comment: 21 pages, 11 figures, 4 tables in Autonomous Robots (2015
- …