13 research outputs found

    D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies

    Full text link
    This document provides the most recent updates on the technical contributions and research challenges focused in WP3. Each Technology Component (TeC) has been evaluated under possible uniform assessment framework of WP3 which is based on the simulation guidelines of WP6. The performance assessment is supported by the simulation results which are in their mature and stable state. An update on the Most Promising Technology Approaches (MPTAs) and their associated TeCs is the main focus of this document. Based on the input of all the TeCs in WP3, a consolidated view of WP3 on the role of multinode/multi-antenna transmission technologies in 5G systems has also been provided. This consolidated view is further supported in this document by the presentation of the impact of MPTAs on METIS scenarios and the addressed METIS goals.Aziz, D.; Baracca, P.; De Carvalho, E.; Fantini, R.; Rajatheva, N.; Popovski, P.; Sørensen, JH.... (2015). D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675

    Interference Alignment and Cancellation in Wireless Communication Systems

    No full text
    The Shannon capacity of wireless networks has a fundamental importance for network information theory. This area has recently seen remarkable progress on a variety of problems including the capacity of interference networks, X networks, cellular networks, cooperative communication networks and cognitive radio networks. While each communication scenario has its own characteristics, a common reason of these recent developments is the new idea of interference alignment. The idea of interference alignment is to consolidate the interference into smaller dimensions of signal space at each receiver and use the remaining dimensions to transmit the desired signals without any interference. However, perfect alignment of interference requires certain assumptions, such as perfect channel state information at transmitter and receiver, perfect synchronization and feedback. Today’s wireless communication systems, on the other and, do not encounter such ideal conditions. In this thesis, we cover a breadth of topics of interference alignment and cancellation schemes in wireless communication systems such as multihop relay networks, multicell networks as well as cooperation and optimisation in such systems. Our main contributions in this thesis can be summarised as follows: • We derive analytical expressions for an interference alignment scheme in a multihop relay network with imperfect channel state information, and investigate the impact of interference on such systems where interference could accumulate due to the misalignment at each hop. • We also address the dimensionality problem in larger wireless communication systems such as multi-cellular systems. We propose precoding schemes based on maximising signal power over interference and noise. We show that these precoding vectors would dramatically improve the rates for multi-user cellular networks in both uplink and downlink, without requiring an excessive number of dimensions. Furthermore, we investigate how to improve the receivers which can mitigate interference more efficiently. • We also propose partial cooperation in an interference alignment and cancellation scheme. This enables us to assess the merits of varying mixture of cooperative and non-cooperative users and the gains achievable while reducing the overhead of channel estimation. In addition to this, we analytically derive expressions for the additional interference caused by imperfect channel estimation in such cooperative systems. We also show the impact of imperfect channel estimation on cooperation gains. • Furthermore, we propose jointly optimisation of interference alignment and cancellation for multi-user multi-cellular networks in both uplink and downlink. We find the optimum set of transceivers which minimise the mean square error at each base station. We demonstrate that optimised transceivers can outperform existing interference alignment and cancellation schemes. • Finally, we consider power adaptation and user selection schemes. The simulation results indicate that user selection and power adaptation techniques based on estimated rates can improve the overall system performance significantly

    Scaling up virtual MIMO systems

    Get PDF
    Multiple-input multiple-output (MIMO) systems are a mature technology that has been incorporated into current wireless broadband standards to improve the channel capacity and link reliability. Nevertheless, due to the continuous increasing demand for wireless data traffic new strategies are to be adopted. Very large MIMO antenna arrays represents a paradigm shift in terms of theory and implementation, where the use of tens or hundreds of antennas provides significant improvements in throughput and radiated energy efficiency compared to single antennas setups. Since design constraints limit the number of usable antennas, virtual systems can be seen as a promising technique due to their ability to mimic and exploit the gains of multi-antenna systems by means of wireless cooperation. Considering these arguments, in this work, energy efficient coding and network design for large virtual MIMO systems are presented. Firstly, a cooperative virtual MIMO (V-MIMO) system that uses a large multi-antenna transmitter and implements compress-and-forward (CF) relay cooperation is investigated. Since constructing a reliable codebook is the most computationally complex task performed by the relay nodes in CF cooperation, reduced complexity quantisation techniques are introduced. The analysis is focused on the block error probability (BLER) and the computational complexity for the uniform scalar quantiser (U-SQ) and the Lloyd-Max algorithm (LM-SQ). Numerical results show that the LM-SQ is simpler to design and can achieve a BLER performance comparable to the optimal vector quantiser. Furthermore, due to its low complexity, U-SQ could be consider particularly suitable for very large wireless systems. Even though very large MIMO systems enhance the spectral efficiency of wireless networks, this comes at the expense of linearly increasing the power consumption due to the use of multiple radio frequency chains to support the antennas. Thus, the energy efficiency and throughput of the cooperative V-MIMO system are analysed and the impact of the imperfect channel state information (CSI) on the system’s performance is studied. Finally, a power allocation algorithm is implemented to reduce the total power consumption. Simulation results show that wireless cooperation between users is more energy efficient than using a high modulation order transmission and that the larger the number of transmit antennas the lower the impact of the imperfect CSI on the system’s performance. Finally, the application of cooperative systems is extended to wireless self-backhauling heterogeneous networks, where the decode-and-forward (DF) protocol is employed to provide a cost-effective and reliable backhaul. The associated trade-offs for a heterogeneous network with inhomogeneous user distributions are investigated through the use of sleeping strategies. Three different policies for switching-off base stations are considered: random, load-based and greedy algorithms. The probability of coverage for the random and load-based sleeping policies is derived. Moreover, an energy efficient base station deployment and operation approach is presented. Numerical results show that the average number of base stations required to support the traffic load at peak-time can be reduced by using the greedy algorithm for base station deployment and that highly clustered networks exhibit a smaller average serving distance and thus, a better probability of coverage

    Cooperative Radio Communications for Green Smart Environments

    Get PDF
    The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

    Cooperative Radio Communications for Green Smart Environments

    Get PDF
    The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

    Novel feedback and signalling mechanisms for interference management and efficient modulation

    Get PDF
    In order to meet the ever-growing demand for mobile data, a number of different technologies have been adopted by the fourth generation standardization bodies. These include multiple access schemes such as spatial division multiple access (SDMA), and efficient modulation techniques such as orthogonal frequency division multiplexing (OFDM)-based modulation. The specific objectives of this theses are to develop an effective feedback method for interference management in smart antenna SDMA systems and to design an efficient OFDM-based modulation technique, where an additional dimension is added to the conventional two-dimensional modulation techniques such as quadrature amplitude modulation (QAM). In SDMA time division duplex (TDD) systems, where channel reciprocity is maintained, uplink (UL) channel sounding method is considered as one of the most promising feedback methods due to its bandwidth and delay efficiency. Conventional channel sounding (CCS) only conveys the channel state information (CSI) of each active user to the base station (BS). Due to the limitation in system performance because of co-channel interference (CCI) from adjacent cells in interference-limited scenarios, CSI is only a suboptimal metric for multiuser spatial multiplexing optimization. The first major contribution of this theses is a novel interference feedback method proposed to provide the BS with implicit knowledge about the interference level received by each mobile station (MS). More specifically, it is proposed to weight the conventional channel sounding pilots by the level of the experienced interference at the user’s side. Interference-weighted channel sounding (IWCS) acts as a spectrally efficient feedback technique that provides the BS with implicit knowledge about CCI experienced by each MS, and significantly improves the downlink (DL) sum capacity for both greedy and fair scheduling policies. For the sake of completeness, a novel procedure is developed to make the IWCS pilots usable for UL optimization. It is proposed to divide the optimization metric obtained from the IWCS pilots by the interference experienced at the BS’s antennas. The resultant new metric, the channel gain divided by the multiplication of DL and UL interference, provides link-protection awareness and is used to optimize both UL and DL. Using maximum capacity scheduling criterion, the link-protection aware metric results in a gain in the median system sum capacity of 26.7% and 12.5% in DL and UL respectively compared to the case when conventional channel sounding techniques are used. Moreover, heuristic algorithm has been proposed in order to facilitate a practical optimization and to reduce the computational complexity. The second major contribution of this theses is an innovative transmission approach, referred to as subcarrier-index modulation (SIM), which is proposed to be integrated with OFDM. The key idea of SIM is to employ the subcarrier-index to convey information to the receiver. Furthermore, a closed-form analytical bit error ratio (BER) of SIM OFDM in Rayleigh channel is derived. Simulation results show BER performance gain of 4 dB over 4-QAM OFDM for both coded and uncoded data without power saving policy. Alternatively, power saving policy maintains an average gain of 1 dB while only using half OFDM symbol transmit power

    Towards an enhanced noncoherent massive MU-MIMO system

    Get PDF
    PhD ThesisMany multiple-input multiple-output (MIMO) downlink transmission schemes assume channel state information (CSI) is available at the receiver/transmitter. In practice, knowledge of CSI is often obtained by using pilot symbols transmitted periodically. However, for some systems, due to high mobility and the cost of channel training and estimation, CSI acquisition is not always feasible. The problem becomes even more difficult when many antennas are used in the system and the channel is changing very rapidly before training is completed. Moreover, as the number of transmit/receive antennas grows large, the number of pilot symbols, system overheads, latency, and power consumption will grow proportionately and thereby the system becomes increasingly complex. As an alternative, a noncoherent system may be used wherein the transmitter/receiver does not need any knowledge of the CSI to perform precoding or detection. This thesis focuses on the design of a noncoherent downlink transmission system to jointly improve the performance and achieve a simple low complexity transmission scheme in three MIMO system scenarios: low rate differential spacetime block coding (STBC) in a downlink multiuser (MU-MIMO) system; high rate differential algebraic STBC in a downlink MU-MIMO system; and differential downlink transmission in a massive MU-MIMO system. Three novel design methods for each of these systems are proposed and analysed thoroughly. For the MIMO system with a low rate noncoherent scheme, a differential STBC MU-MIMO system with a downlink transmission scheme is considered. Specifically, downlink precoding combined with differential modulation (DM) is used to shift the complexity from the receivers to the transmitter. The block diagonalization (BD) precoding scheme is used to cancel co-channel interference (CCI) in addition to exploiting its advantage of enhancing diversity. Since the BD scheme requires channel knowledge at the transmitter, the downlink spreading technique along with DM is also proposed, which does not require channel knowledge neither at the transmitter nor at the receivers. The orthogonal spreading (OS) scheme is employed to have similar principle as code division multiple access (CDMA) multiplexing scheme in order to eliminate the interference between users. As a STBC scheme, the Alamouti code is used that can be encoded/decoded using DM thereby eliminating the need for channel knowledge at the receiver. The proposed schemes yield low complexity transceivers while providing good performance. For the MIMO system with a high rate noncoherent scheme, a differential STBC MU-MIMO system that operates at a high data rate is considered. In particular, a full-rate full-diversity downlink algebraic transmission scheme combined with a differential STBC systems is proposed. To achieve this, perfect algebraic space time codes and Cayley differential (CD) transforms are employed. Since CSI is not needed at the differential receiver, differential schemes are ideal for multiuser systems to shift the complexity from the receivers to the transmitter, thus simplifying user equipment. Furthermore, OS matrices are employed at the transmitter to separate the data streams of different users and enable simple single user decoding. In the OS scheme, the transmitter does not require any knowledge of the CSI to separate the data streams of multiple users; this results in a system which does not need CSI at either end. With this system, to limit the number of possible codewords, a sphere decoder (SD) is used to decode the signals at the receiving end. The proposed scheme yields low complexity transceivers while providing full-rate full-diversity system with good performance. Lastly, a differential downlink transmission scheme is proposed for a massive MIMO system without explicit channel estimation. In particular, a downlink precoding technique combined with a differential encoding scheme is used to simplify the overall system complexity. A novel precoder is designed which, with a large number of transmit antennas, can effectively precancel the multiple access interference (MAI) for each user, thus enhancing the system performance. Maximising the worst case signal-to-interference-plus-noise ratio (SINR) is adopted to optimise the precoder for the users in which full power space profile (PSP) knowledge is available to the base station (BS). Also, two suboptimal solutions based on the matched and the orthogonality approach of PSP are provided to separate the data streams of multiple users. The decision feedback differential detection (DFDD) technique is employed to further improve the performance. In summary, the proposed methods eliminate MAI, enhance system performance, and achieve a simple low complexity system. Moreover, transmission overheads are significantly reduced, the proposed methods avoid explicit channel estimation at both ends.King Fahad Security Collage at the Ministry of Interior - Saudi Arabia

    Near-capacity fixed-rate and rateless channel code constructions

    No full text
    Fixed-rate and rateless channel code constructions are designed for satisfying conflicting design tradeoffs, leading to codes that benefit from practical implementations, whilst offering a good bit error ratio (BER) and block error ratio (BLER) performance. More explicitly, two novel low-density parity-check code (LDPC) constructions are proposed; the first construction constitutes a family of quasi-cyclic protograph LDPC codes, which has a Vandermonde-like parity-check matrix (PCM). The second construction constitutes a specific class of protograph LDPC codes, which are termed as multilevel structured (MLS) LDPC codes. These codes possess a PCM construction that allows the coexistence of both pseudo-randomness as well as a structure requiring a reduced memory. More importantly, it is also demonstrated that these benefits accrue without any compromise in the attainable BER/BLER performance. We also present the novel concept of separating multiple users by means of user-specific channel codes, which is referred to as channel code division multiple access (CCDMA), and provide an example based on MLS LDPC codes. In particular, we circumvent the difficulty of having potentially high memory requirements, while ensuring that each user’s bits in the CCDMA system are equally protected. With regards to rateless channel coding, we propose a novel family of codes, which we refer to as reconfigurable rateless codes, that are capable of not only varying their code-rate but also to adaptively modify their encoding/decoding strategy according to the near-instantaneous channel conditions. We demonstrate that the proposed reconfigurable rateless codes are capable of shaping their own degree distribution according to the nearinstantaneous requirements imposed by the channel, but without any explicit channel knowledge at the transmitter. Additionally, a generalised transmit preprocessing aided closed-loop downlink multiple-input multiple-output (MIMO) system is presented, in which both the channel coding components as well as the linear transmit precoder exploit the knowledge of the channel state information (CSI). More explicitly, we embed a rateless code in a MIMO transmit preprocessing scheme, in order to attain near-capacity performance across a wide range of channel signal-to-ratios (SNRs), rather than only at a specific SNR. The performance of our scheme is further enhanced with the aid of a technique, referred to as pilot symbol assisted rateless (PSAR) coding, whereby a predetermined fraction of pilot bits is appropriately interspersed with the original information bits at the channel coding stage, instead of multiplexing pilots at the modulation stage, as in classic pilot symbol assisted modulation (PSAM). We subsequently demonstrate that the PSAR code-aided transmit preprocessing scheme succeeds in gleaning more information from the inserted pilots than the classic PSAM technique, because the pilot bits are not only useful for sounding the channel at the receiver but also beneficial for significantly reducing the computational complexity of the rateless channel decoder
    corecore