Joint User‑Centric Clustering and Multi‑cell Radio Resource Management in Coordinated Multipoint Joint Transmission

Coordinated multipoint joint transmission (JT-CoMP) is a promising solution to address inter-cell interference in dense future wireless networks due its strength in converting interfering signals into useful signals, thereby enhancing capacity especially at the cell edge. However, allowing all user equipments (UEs) to operate using the JT-CoMP mode reduces the availability of radio resources. This paper develops an efficient algorithm that can identify which UEs will benefit from operating in a JT-CoMP mode and how to efficiently allocate radio resources from multiple base stations. Joint user-centric JT-CoMP clustering and multi-cell resource management is used in two steps where user-centric clusters are constructed as a first step and according to the clustering results obtained, resources are assigned. This paper also provides a new user-centric clustering approach that allows a user to utilize the JT-CoMP technique only if JT-CoMP boosts its rate above a certain threshold level. A multi-cell resource allocation scheme that can address the resource mismatching problem between cooperative BSs that happens due to load imbalance is proposed. Simulation results show that the proposed user-centric clustering algorithm outperforms the traditional power level difference scheme in terms of the system’s overall throughput as well as the throughput of cell-edge users. Also, results show that the performance of JT-CoMP is mainly affected by the user-centric approach and the amount of physical radio resources assigned to CoMP UEs

Fast and Efficient Radio Resource Allocation in Dynamic Ultra-Dense Heterogeneous Networks

Ultra-dense network (UDN) is considered as a promising technology in 5G wireless networks. In an UDN network, dynamic traffic patterns can lead to a high computational complexity and an excessive communications overhead with traditional resource allocation schemes. In this paper, a new resource allocation scheme presenting a low computational overhead and a low subband handoff rate in a dynamic ultra-dense heterogeneous network is presented. The scheme first defines a new interference estimation method that constructs network interference state map, based on which a radio resource allocation scheme is proposed. The resource allocation problem is a MAX-K cut problem and can be solved through a graph- theoretical approach. System level simulations reveal that the proposed scheme decreases the subband handoff rate by 30% with less than 3.2% network throughput degradation

Ultra Dense Networks Deployment for beyond 2020 Technologies

A new communication paradigm is foreseen for beyond 2020 society, due to the emergence of new broadband services and the Internet of Things era. The set of requirements imposed by these new applications is large and diverse, aiming to provide a ubiquitous broadband connectivity. Research community has been working in the last decade towards the definition of the 5G mobile wireless networks that will provide the proper mechanisms to reach these challenging requirements. In this framework, three key research directions have been identified for the improvement of capacity in 5G: the increase of the spectral efficiency by means of, for example, the use of massive MIMO technology, the use of larger amounts of spectrum by utilizing the millimeter wave band, and the network densification by deploying more base stations per unit area. This dissertation addresses densification as the main enabler for the broadband and massive connectivity required in future 5G networks. To this aim, this Thesis focuses on the study of the UDN. In particular, a set of technology enablers that can lead UDN to achieve their maximum efficiency and performance are investigated, namely, the use of higher frequency bands for the benefit of larger bandwidths, the use of massive MIMO with distributed antenna systems, and the use of distributed radio resource management techniques for the inter-cell interference coordination. Firstly, this Thesis analyzes whether there exists a fundamental performance limit related with densification in cellular networks. To this end, the UDN performance is evaluated by means of an analytical model consisting of a 1-dimensional network deployment with equally spaced BS. The inter-BS distance is decreased until reaching the limit of densification when this distance approaches 0. The achievable rates in networks with different inter-BS distances are analyzed for several levels of transmission power availability, and for various types of cooperation among cells. Moreover, UDN performance is studied in conjunction with the use of a massive number of antennas and larger amounts of spectrum. In particular, the performance of hybrid beamforming and precoding MIMO schemes are assessed in both indoor and outdoor scenarios with multiple cells and users, working in the mmW frequency band. On the one hand, beamforming schemes using the full-connected hybrid architecture are analyzed in BS with limited number of RF chains, identifying the strengths and weaknesses of these schemes in a dense-urban scenario. On the other hand, the performance of different indoor deployment strategies using HP in the mmW band is evaluated, focusing on the use of DAS. More specifically, a DHP suitable for DAS is proposed, comparing its performance with that of HP in other indoor deployment strategies. Lastly, the presence of practical limitations and hardware impairments in the use of hybrid architectures is also investigated. Finally, the investigation of UDN is completed with the study of their main limitation, which is the increasing inter-cell interference in the network. In order to tackle this problem, an eICIC scheduling algorithm based on resource partitioning techniques is proposed. Its performance is evaluated and compared to other scheduling algorithms under several degrees of network densification. After the completion of this study, the potential of UDN to reach the capacity requirements of 5G networks is confirmed. Nevertheless, without the use of larger portions of spectrum, a proper interference management and the use of a massive number of antennas, densification could turn into a serious problem for mobile operators. Performance evaluation results show large system capacity gains with the use of massive MIMO techniques in UDN, and even greater when the antennas are distributed. Furthermore, the application of ICIC techniques reveals that, besides the increase in system capacity, it brings significant energy savings to UDNs.A partir del año 2020 se prevé que un nuevo paradigma de comunicación surja en la sociedad, debido a la aparición de nuevos servicios y la era del Internet de las cosas. El conjunto de requisitos impuesto por estas nuevas aplicaciones es muy amplio y diverso, y tiene como principal objetivo proporcionar conectividad de banda ancha y universal. En las últimas décadas, la comunidad científica ha estado trabajando en la definición de la 5G de redes móviles que brindará los mecanismos necesarios para garantizar estos requisitos. En este marco, se han identificado tres mecanismos clave para conseguir el necesario incremento de capacidad de la red: el aumento de la eficiencia espectral a través de, por ejemplo, el uso de tecnologías MIMO masivas, la utilización de mayores porciones del espectro en frecuencia y la densificación de la red mediante el despliegue de más estaciones base por área. Esta Tesis doctoral aborda la densificación como el principal mecanismo que permitirá la conectividad de banda ancha y universal requerida en la 5G, centrándose en el estudio de las Redes Ultra Densas o UDNs. En concreto, se analiza el conjunto de tecnologías habilitantes que pueden llevar a las UDNs a obtener su máxima eficiencia y prestaciones, incluyendo el uso de altas frecuencias para el aprovechamiento de mayores anchos de banda, la utilización de MIMO masivo con sistemas de antenas distribuidas y el uso de técnicas de reparto de recursos distribuidas para la coordinación de interferencias. En primer lugar, se analiza si existe un límite fundamental en la mejora de las prestaciones en relación a la densificación. Con este fin, las prestaciones de las UDNs se evalúan utilizando un modelo analítico de red unidimensional con BSs equiespaciadas, en el que la distancia entre BSs se disminuye hasta alcanzar el límite de densificación cuando ésta se aproxima a 0. Las tasas alcanzables en redes con distintas distancias entre BSs son analizadas, considerando distintos niveles de potencia disponible en la red y varios grados de cooperación entre celdas. Además, el comportamiento de las UDNs se estudia junto al uso masivo de antenas y la utilización de anchos de banda mayores. Más concretamente, las prestaciones de ciertas técnicas híbridas MIMO de precodificación y beamforming se examinan en la banda milimétrica. Por una parte, se analizan esquemas de beamforming en BSs con arquitectura híbrida en función de la disponibilidad de cadenas de radiofrecuencia en escenarios exteriores. Por otra parte, se evalúan las prestaciones de ciertos esquemas de precodificación híbrida en escenarios interiores, utilizando distintos despliegues y centrando la atención en los sistemas de antenas distribuidos o DAS. Además, se propone un algoritmo de precodificación híbrida específico para DAS, y se evalúan y comparan sus prestaciones con las de otros algoritmos de precodificación utilizados. Por último, se investiga el impacto en las prestaciones de ciertas limitaciones prácticas y deficiencias introducidas por el uso de dispositivos no ideales. Finalmente, el estudio de las UDNs se completa con el análisis de su principal limitación, el nivel creciente de interferencia en la red. Para ello, se propone un algoritmo de control de interferencias basado en la partición de recursos. Sus prestaciones son evaluadas y comparadas con las de otras técnicas de asignación de recursos. Tras este estudio, se puede afirmar que las UDNs tienen gran potencial para la consecución de los requisitos de la 5G. Sin embargo, sin el uso conjunto de mayores porciones del espectro, adecuadas técnicas de control de la interferencia y el uso masivo de antenas, las UDNs pueden convertirse en serios obstáculos para los operadores móviles. Los resultados de la evaluación de prestaciones de estas tecnologías confirman el gran aumento de la capacidad de las redes mediante el uso masivo de antenas y la introducción de mecanismos de IA partir de l'any 2020 es preveu un nou paradigma de comunicació en la societat, degut a l'aparició de nous serveis i la era de la Internet de les coses. El conjunt de requeriments imposat per aquestes noves aplicacions és ampli i divers, i té com a principal objectiu proporcionar connectivitat universal i de banda ampla. En les últimes dècades, la comunitat científica ha estat treballant en la definició de la 5G, que proveirà els mecanismes necessaris per a garantir aquests exigents requeriments. En aquest marc, s'han identificat tres mecanismes claus per a aconseguir l'increment necessari en la capacitat: l'augment de l'eficiència espectral a través de, per exemple, l'ús de tecnologies MIMO massives, la utilització de majors porcions de l'espectre i la densificació mitjançant el desplegament de més estacions base per àrea. Aquesta Tesi aborda la densificació com a principal mecanisme que permetrà la connectivitat de banda ampla i universal requerida en la 5G, centrant-se en l' estudi de les xarxes ultra denses (UDNs). Concretament, el conjunt de tecnologies que poden dur a les UDNs a la seua màxima eficiència i prestacions és analitzat, incloent l'ús d'altes freqüències per a l'aprofitament de majors amplàries de banda, la utilització de MIMO massiu amb sistemes d'antenes distribuïdes i l'ús de tècniques distribuïdes de repartiment de recursos per a la coordinació de la interferència. En primer lloc, aquesta Tesi analitza si existeix un límit fonamental en les prestacions en relació a la densificació. Per això, les prestacions de les UDNs s'avaluen utilitzant un model analític unidimensional amb estacions base equidistants, en les quals la distància entre estacions base es redueix fins assolir el límit de densificació quan aquesta distància s'aproxima a 0. Les taxes assolibles en xarxes amb diferents distàncies entre estacions base s'analitzen considerant diferents nivells de potència i varis graus de cooperació entre cel·les. A més, el comportament de les UDNs s'estudia conjuntament amb l'ús massiu d'antenes i la utilització de majors amplàries de banda. Més concretament, les prestacions de certes tècniques híbrides MIMO de precodificació i beamforming s'examinen en la banda mil·limètrica. D'una banda, els esquemes de beamforming aplicats a estacions base amb arquitectures híbrides és analitzat amb disponibilitat limitada de cadenes de radiofreqüència a un escenari urbà dens. D'altra banda, s'avaluen les prestacions de certs esquemes de precodificació híbrida en escenaris d'interior, utilitzant diferents estratègies de desplegament i centrant l'atenció en els sistemes d' antenes distribuïdes (DAS). A més, es proposa un algoritme de precodificació híbrida distribuïda per a DAS, i s'avaluen i comparen les seues prestacions amb les de altres algoritmes. Per últim, s'investiga l'impacte de les limitacions pràctiques i altres deficiències introduïdes per l'ús de dispositius no ideals en les prestacions de tots els esquemes anteriors. Finalment, l' estudi de les UDNs es completa amb l'anàlisi de la seua principal limitació, el nivell creixent d'interferència entre cel·les. Per tractar aquest problema, es proposa un algoritme de control d'interferències basat en la partició de recursos. Les prestacions de l'algoritme proposat s'avaluen i comparen amb les d'altres tècniques d'assignació de recursos. Una vegada completat aquest estudi, es pot afirmar que les UDNs tenen un gran potencial per aconseguir els ambiciosos requeriments plantejats per a la 5G. Tanmateix, sense l'ús conjunt de majors amplàries de banda, apropiades tècniques de control de la interferència i l'ús massiu d'antenes, les UDNs poden convertir-se en seriosos obstacles per als operadors mòbils. Els resultats de l'avaluació de prestacions d' aquestes tecnologies confirmen el gran augment de la capacitat de les xarxes obtingut mitjançant l'ús massiu d'antenes i la introducciGiménez Colás, S. (2017). Ultra Dense Networks Deployment for beyond 2020 Technologies [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/86204TESI

A model-driven deep reinforcement learning heuristic algorithm for resource allocation in ultra-dense cellular networks

Resource allocation in ultra dense network (UDN) is an multi-objective optimization problem since it has to consider the tradeoff among spectrum efficiency (SE), energy efficiency (EE) and fairness. The existing methods can not effectively solve this NP-hard nonconvex problem, especially in the presence of limited channel state information (CSI). In this paper, we investigate a novel model-driven deep reinforcement learning assisted resource allocation method. We first design a novel deep neural network (DNN)-based optimization framework consisting of a series of Alternating Direction Method of Multipliers (ADMM) iterative procedures, which makes the CSI as the learned weights. Then a novel channel information absent Q-learning resource allocation (CIAQ) algorithm is proposed to train the DNN-based optimization framework without massive labeling data, where the SE, the EE, and the fairness can be jointly optimized by adjusting discount factor. Our simulation results show that, the proposed CIAQ with rapid convergence speed not only well characterizes the extent of optimization objective with partial CSI, but also significantly outperforms the current random initialization method of neural network and the other existing resource allocation algorithms in term of the tradeoff among the SE, EE and fairness

Self-organised multi-objective network clustering for coordinated communications in future wireless networks

The fifth generation (5G) cellular system is being developed with a vision of 1000 times more capacity than the fourth generation (4G) systems to cope with ever increasing mobile data traffic. Interference mitigation plays an important role in improving the much needed overall capacity especially in highly interference-limited dense deployment scenarios envisioned for 5G. Coordinated multi-point (CoMP) is identified as a promising interference mitigation technique where multiple base stations (BS) can cooperate for joint transmission/reception by exchanging user/control data and perform joint signal processing to mitigate inter-cell interference and even exploit it as a useful signal. CoMP is already a key feature of long term evolution-advanced (LTE-A) and envisioned as an essential function for 5G. However, CoMP cannot be realized for the whole network due to its computational complexity, synchronization requirement between coordinating BSs and high backhaul capacity requirement. BSs need to be clustered into smaller groups and CoMP can be activated within these smaller clusters. This PhD thesis aims to investigate optimum dynamic CoMP clustering solutions in 5G and beyond wireless networks with massive small cell (SC) deployment. Truly self-organised CoMP clustering algorithms are investigated, aiming to improve much needed spectral efficiency and other network objectives especially load balancing in future wireless networks. Low complexity, scalable, stable and efficient CoMP clustering algorithms are designed to jointly optimize spectral efficiency, load balancing and limited backhaul availability. Firstly, we provide a self organizing, load aware, user-centric CoMP clustering algorithm in a control and data plane separation architecture (CDSA) proposed for 5G to maximize spectral efficiency and improve load balancing. We introduce a novel re-clustering algorithm for user equipment (UE) served by highly loaded cells and show that unsatisfied UEs due to high load can be significantly reduced with minimal impact on spectral efficiency. Clustering with load balancing algorithm exploits the capacity gain from increase in cluster size and also the traffic shift from highly loaded cells to lightly loaded neighbours. Secondly, we develop a novel, low complexity, stable, network-centric clustering model to jointly optimize load balancing and spectral efficiency objectives and tackle the complexity and scalability issues of user-centric clustering. We show that our clustering model provide high spectral efficiency in low-load scenario and better load distribution in high-load scenario resulting in lower number of unsatisfied users while keeping spectral efficiency at comparably high levels. Unsatisfied UEs due to high load are reduced by $68.5\%$ with our algorithm when compared to greedy clustering model. In this context, the unique contribution of this work that it is the first attempt to fill the gap in literature for multi-objective, network-centric CoMP clustering, jointly optimizing load balancing and spectral efficiency. Thirdly, we design a novel multi-objective CoMP clustering algorithm to include backhaul-load awareness and tackle one of the biggest challenges for the realization of CoMP in future networks i.e. the demand for high backhaul bandwidth and very low latency. We fill the gap in literature as the first attempt to design a clustering algorithm to jointly optimize backhaul/radio access load and spectral efficiency and analyze the trade-off between them. We employ 2 novel coalitional game theoretic clustering methods, 1-a novel merge/split/transfer coalitional game theoretic clustering algorithm to form backhaul and load aware BS clusters where spectral efficiency is still kept at high level, 2-a novel user transfer game model to move users between clusters to improve load balancing further. Stability and complexity analysis is provided and simulation results are presented to show the performance of the proposed method under different backhaul availability scenarios. We show that average system throughout is increased by 49.9% with our backhaul-load aware model in high load scenario when compared to a greedy model. Finally, we provide an operator's perspective on deployment of CoMP. Firstly, we present the main motivation and benefits of CoMP from an operator's viewpoint. Next, we present operational requirements for CoMP implementation and discuss practical considerations and challenges of such deployment. Possible solutions for these experienced challenges are reviewed. We then present initial results from a UL CoMP trial and discuss changes in key network performance indicators (KPI) during the trial. Additionally, we propose further improvements to the trialed CoMP scheme for better potential gains and give our perspective on how CoMP will fit into the future wireless networks

Advanced User-centric Modeling for Future Wireless Communication Networks: Performance Analysis and Optimization

Due to the increasingly growing demand for high data rates and a massive number of connected devices, future wireless communication networks are required to provide much more resources than the current networks can do. As an emerging solution for future cellular networks, dense deployment of small cell base stations (BSs) has received a great deal of attention both in academia and industry. A major challenge in dense cellular networks is the interference experienced by the user from its neighboring active BSs. The effect of such interference is more deleterious at cell-edge users which limits the density of deployed BSs. An effective promising solution is to move from a cell-centric to a user-centric paradigm which allows each user to be connected to a set (cluster) of BSs instead of being associated with a single one. This will mitigate the interference effect and remove the cell boundaries, i.e, no cell-edge users. In this thesis, we develop novel BS clustering models to enable a user-centric BS cooperation for future wireless networks. Unlike the existing clustering models, where a user is served by a cluster of BSs with fixed size (either a fixed number of BSs or fixed cluster radius), our proposed models adapt the cluster of each user dynamically based on its channel condition and quality-of-service (QoS) requirements. To design user-centric networks, we focus on several technologies introduced for future wireless wireless communication systems such as millimeter wave (mmWave) and terahertz (THz) networks, unmanned aerial vehicle (UAV)-assisted networks, hybrid multi-tier networks, and energy harvesting networks. We first investigate the performance of a user-centric mmWave network under the proposed dynamic BS clustering model using tools from stochastic geometry. To maximize the system spectral efficiency, an optimization framework for the user’s serving cluster is developed. Then, a user-centric THz system is designed to compensate for the high pathloss and hence improve the coverage of THz networks. Both dynamic and static clustering approaches are considered, based on which we study the coverage probability of the user-centric THz network by using stochastic geometry. Then, to design an energy-efficient and reliable air-to-air connection in UAV networks, we design a 3D user-centric clustering model where a set of UAV transmitters spatially distributed in a 3D space in the sky are carefully selected to serve another UAV receiver. Analytical expressions for the spectral efficiency and energy efficiency of this user-centric UAV network are provided and an efficient and tractable optimization framework to maximize its energy efficiency is developed. In this thesis, we also implement a user-centric BS clustering for hybrid networks where THz, mmWave, and sub6-GHz BSs coexist. In this system, a user can be associated with the best BS cluster, from either a sub6-GHz, mmWave or THz tier based on either the maximum SINR criterion or the maximum rate criterion. Thus, with carefully planned networks, enabling hybrid user-centric wireless systems can provide ultra-high rates while maintaining sufficient coverage in future multitier networks. Furthermore, we adopt the proposed user-centric clustering model to enhance the joint rate and energy coverage of cellular networks with simultaneous wireless information and power transfer (SWIPT). For this setup, we aim to insure that the user can harvest sufficient energy in a given time slot and receive the required minimum data from a given serving cluster. Then, a mathematical optimization model for the time switching coefficient is developed to maximize the system joint rate and energy coverage performance. All analytical results are validated by simulation with comparison to some of the existing works, demonstrating that the proposed analytical frameworks are accurate and efficient in the design and deployment of future user-centric wireless networks

Intelligent and Efficient Ultra-Dense Heterogeneous Networks for 5G and Beyond

Ultra-dense heterogeneous network (HetNet), in which densified small cells overlaying the conventional macro-cells, is a promising technique for the fifth-generation (5G) mobile network. The dense and multi-tier network architecture is able to support the extensive data traffic and diverse quality of service (QoS) but meanwhile arises several challenges especially on the interference coordination and resource management. In this thesis, three novel network schemes are proposed to achieve intelligent and efficient operation based on the deep learning-enabled network awareness. Both optimization and deep learning methods are developed to achieve intelligent and efficient resource allocation in these proposed network schemes. To improve the cost and energy efficiency of ultra-dense HetNets, a hotspot prediction based virtual small cell (VSC) network is proposed. A VSC is formed only when the traffic volume and user density are extremely high. We leverage the feature extraction capabilities of deep learning techniques and exploit a long-short term memory (LSTM) neural network to predict potential hotspots and form VSC. Large-scale antenna array enabled hybrid beamforming is also adaptively adjusted for highly directional transmission to cover these VSCs. Within each VSC, one user equipment (UE) is selected as a cell head (CH), which collects the intra-cell traffic using the unlicensed band and relays the aggregated traffic to the macro-cell base station (MBS) in the licensed band. The inter-cell interference can thus be reduced, and the spectrum efficiency can be improved. Numerical results show that proposed VSCs can reduce $55\%$ power consumption in comparison with traditional small cells. In addition to the smart VSCs deployment, a novel multi-dimensional intelligent multiple access (MD-IMA) scheme is also proposed to achieve stringent and diverse QoS of emerging 5G applications with disparate resource constraints. Multiple access (MA) schemes in multi-dimensional resources are adaptively scheduled to accommodate dynamic QoS requirements and network states. The MD-IMA learns the integrated-quality-of-system-experience (I-QoSE) by monitoring and predicting QoS through the LSTM neural network. The resource allocation in the MD-IMA scheme is formulated as an optimization problem to maximize the I-QoSE as well as minimize the non-orthogonality (NO) in view of implementation constraints. In order to solve this problem, both model-based optimization algorithms and model-free deep reinforcement learning (DRL) approaches are utilized. Simulation results demonstrate that the achievable I-QoSE gain of MD-IMA over traditional MA is $15\%$ - $18\%$. In the final part of the thesis, a Software-Defined Networking (SDN) enabled 5G-vehicle ad hoc networks (VANET) is designed to support the growing vehicle-generated data traffic. In this integrated architecture, to reduce the signaling overhead, vehicles are clustered under the coordination of SDN and one vehicle in each cluster is selected as a gateway to aggregate intra-cluster traffic. To ensure the capacity of the trunk-link between the gateway and macro base station, a Non-orthogonal Multiplexed Modulation (NOMM) scheme is proposed to split aggregated data stream into multi-layers and use sparse spreading code to partially superpose the modulated symbols on several resource blocks. The simulation results show that the energy efficiency performance of proposed NOMM is around 1.5-2 times than that of the typical orthogonal transmission scheme

Facilitating Flexible Link Layer Protocols for Future Wireless Communication Systems

This dissertation addresses the problem of designing link layer protocols which are flexible enough to accommodate the demands offuture wireless communication systems (FWCS).We show that entire link layer protocols with diverse requirements and responsibilities can be composed out of reconfigurable and reusable components.We demonstrate this by designing and implementinga novel concept termed Flexible Link Layer (FLL) architecture.Through extensive simulations and practical experiments, we evaluate a prototype of the suggested architecture in both fixed-spectrumand dynamic spectrum access (DSA) networks. FWCS are expected to overcome diverse challenges including the continual growthin traffic volume and number of connected devices.Furthermore, they are envisioned to support a widerange of new application requirements and operating conditions.Technology trends, including smart homes, communicating machines, and vehicularnetworks, will not only grow on a scale that once was unimaginable, they will also become the predominant communication paradigm, eventually surpassing today's human-produced network traffic. In order for this to become reality, today's systems have to evolve in many ways.They have to exploit allocated resources in a more efficient and energy-conscious manner.In addition to that, new methods for spectrum access and resource sharingneed to be deployed.Having the diversification of applications and network conditions in mind, flexibility at all layers of a communication system is of paramount importance in order to meet the desired goals. However, traditional communication systems are often designed with specific and distinct applications in mind. Therefore, system designers can tailor communication systems according to fixedrequirements and operating conditions, often resulting in highly optimized but inflexible systems.Among the core problems of such design is the mix of data transfer and management aspects.Such a combination of concerns clearly hinders the reuse and extension of existing protocols. To overcome this problem, the key idea explored in this dissertation is a component-based design to facilitate the development of more flexible and versatile link layer protocols.Specifically, the FLL architecture, suggested in this dissertation, employs a generic, reconfigurable data transfer protocol around which one or more complementary protocols, called link layer applications, are responsible for management-related aspects of the layer. To demonstrate the feasibility of the proposed approach, we have designed andimplemented a prototype of the FLL architecture on the basis ofa reconfigurable software defined radio (SDR) testbed.Employing the SDR prototype as well as computer simulations, thisdissertation describes various experiments used to examine a range of link layerprotocols for both fixed-spectrum and DSA networks. This dissertation firstly outlines the challenges faced by FWCSand describes DSA as a possible technology component for their construction.It then specifies the requirements for future DSA systemsthat provide the basis for our further considerations.We then review the background on link layer protocols, surveyrelated work on the construction of flexible protocol frameworks,and compare a range of actual link layer protocols and algorithms.Based on the results of this analysis, we design, implement, and evaluatethe FLL architecture and a selection of actual link layer protocols. We believe the findings of this dissertation add substantively to the existing literature on link layer protocol design and are valuable for theoreticians and experimentalists alike

Leveraging Machine Learning Techniques towards Intelligent Networking Automation

In this thesis, we address some of the challenges that the Intelligent Networking Automation (INA) paradigm poses. Our goal is to design schemes leveraging Machine Learning (ML) techniques to cope with situations that involve hard decision-making actions. The proposed solutions are data-driven and consist of an agent that operates at network elements such as routers, switches, or network servers. The data are gathered from realistic scenarios, either actual network deployments or emulated environments. To evaluate the enhancements that the designed schemes provide, we compare our solutions to non-intelligent ones. Additionally, we assess the trade-off between the obtained improvements and the computational costs of implementing the proposed mechanisms. Accordingly, this thesis tackles the challenges that four specific research problems present. The first topic addresses the problem of balancing traffic in dense Internet of Things (IoT) network scenarios where the end devices and the Base Stations (BSs) form complex networks. By applying ML techniques to discover patterns in the association between the end devices and the BSs, the proposed scheme can balance the traffic load in a IoT network to increase the packet delivery ratio and reduce the energy cost of data delivery. The second research topic proposes an intelligent congestion control for internet connections at edge network elements. The design includes a congestion predictor based on an Artificial Neural Network (ANN) and an Active Queue Management (AQM) parameter tuner. Similarly, the third research topic includes an intelligent solution to the inter-domain congestion. Different from second topic, this problem considers the preservation of the private network data by means of Federated Learning (FL), since network elements of several organizations participate in the intelligent process. Finally, the fourth research topic refers to a framework to efficiently gathering network telemetry (NT) data. The proposed solution considers a traffic-aware approach so that the NT is intelligently collected and transmitted by the network elements. All the proposed schemes are evaluated through use cases considering standardized networking mechanisms. Therefore, we envision that the solutions of these specific problems encompass a set of methods that can be utilized in real-world scenarios towards the realization of the INA paradigm

Evolutionary genomics : statistical and computational methods

This open access book addresses the challenge of analyzing and understanding the evolutionary dynamics of complex biological systems at the genomic level, and elaborates on some promising strategies that would bring us closer to uncovering of the vital relationships between genotype and phenotype. After a few educational primers, the book continues with sections on sequence homology and alignment, phylogenetic methods to study genome evolution, methodologies for evaluating selective pressures on genomic sequences as well as genomic evolution in light of protein domain architecture and transposable elements, population genomics and other omics, and discussions of current bottlenecks in handling and analyzing genomic data. Written for the highly successful Methods in Molecular Biology series, chapters include the kind of detail and expert implementation advice that lead to the best results. Authoritative and comprehensive, Evolutionary Genomics: Statistical and Computational Methods, Second Edition aims to serve both novices in biology with strong statistics and computational skills, and molecular biologists with a good grasp of standard mathematical concepts, in moving this important field of study forward