3,833 research outputs found
Pediatric and Adolescent Nephrology Facing the Future: Diagnostic Advances and Prognostic Biomarkers in Everyday Practice
The Special Issue entitled “Pediatric and adolescent nephrology facing the future: diagnostic advances and prognostic biomarkers in everyday practice” contains articles written in the era when COVID-19 had not yet been a major clinical problem in children. Now that we know its multifaceted clinical course, complications concerning the kidneys, and childhood-specific post-COVID pediatric inflammatory multisystem syndrome (PIMS), the value of diagnostic and prognostic biomarkers in the pediatric area should be appreciated, and their importance ought to increase
ATR-FTIR Spectroscopy-Linked Chemometrics:A Novel Approach to the Analysis and Control of the Invasive Species Japanese Knotweed
Japanese knotweed (Reynoutria japonica), an invasive plant species, causes negative environmental and socio-economic impacts. A female clone in the United Kingdom, its extensive rhizome system enables rapid vegetative spread. Plasticity permits this species to occupy a broad geographic range and survive harsh abiotic conditions. It is notoriously difficult to control with traditional management strategies, which include repetitive herbicide application and costly carbon-intensive rhizome excavation. This problem is complicated by crossbreeding with the closely related species, Giant knotweed (Reynoutria sachalinensis), to give the more vigorous hybrid, Bohemian knotweed (Fallopia x Bohemica) which produces viable seed. These species, hybrids, and backcrosses form a morphologically similar complex known as Japanese knotweed ‘sensu lato’ and are often misidentified. The research herein explores the opportunities offered by advances in the application of attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy-linked chemometrics within plant sciences, for the identification and control of knotweed, to enhance our understanding of knotweed biology, and the potential of this technique. ATR-FTIR spectral profiles of Japanese knotweed leaf material and xylem sap samples, which include important biological absorptions due to lipids, proteins, carbohydrates, and nucleic acids, were used to: identify plants from different growing regions highlighting the plasticity of this clonal species; differentiate between related species and hybrids; and predict key physiological characteristics such as hormone concentrations and root water potential. Technical advances were made for the application of ATR-FTIR spectroscopy to plant science, including definition of the environmental factors that exert the most significant influence on spectral profiles, evaluation of sample preparation techniques, and identification of key wavenumbers for prediction of hormone concentrations and abiotic stress. The presented results cement the position of concatenated mid-infrared spectroscopy and machine learning as a powerful approach for the study of plant biology, extending its reach beyond the field of crop science to demonstrate a potential for the discrimination between and control of invasive plant species
Feature Papers in Compounds
This book represents a collection of contributions in the field of the synthesis and characterization of chemical compounds, natural products, chemical reactivity, and computational chemistry. Among its contents, the reader will find high-quality, peer-reviewed research and review articles that were published in the open access journal Compounds by members of the Editorial Board and the authors invited by the Editorial Office and Editor-in-Chief
Intelligent computing : the latest advances, challenges and future
Computing is a critical driving force in the development of human civilization. In recent years, we have witnessed the emergence of intelligent computing, a new computing paradigm that is reshaping traditional computing and promoting digital revolution in the era of big data, artificial intelligence and internet-of-things with new computing theories, architectures, methods, systems, and applications. Intelligent computing has greatly broadened the scope of computing, extending it from traditional computing on data to increasingly diverse computing paradigms such as perceptual intelligence, cognitive intelligence, autonomous intelligence, and human computer fusion intelligence. Intelligence and computing have undergone paths of different evolution and development for a long time but have become increasingly intertwined in recent years: intelligent computing is not only intelligence-oriented but also intelligence-driven. Such cross-fertilization has prompted the emergence and rapid advancement of intelligent computing
Biomanufacturing Technologies for Tissue Engineering
Il seguente lavoro di tesi ha come obiettivo lo studio e la realizzazione di device biomedicali realizzati tramite la manifattura additiva. La manifattura additiva sta avendo una forte crescita negli ultimi anni grazie soprattutto alla possibilità di realizzare facilmente geometrie complesse. Questa caratteristica permette di personalizzare i prodotti ad un costo competitivo. Inoltre, lo spreco di materiale viene ridotto moltissimo dal principio di fabbricazione. Tutte queste proprietà hanno fatto in modo che negli ultimi anni la manifattura additiva prendesse sempre più piede in campi come l’automotive, l’aerospace e il biomedicale.
Questo lavoro di tesi è focalizzato sull’utilizzo di alcune tra le più diffuse tecnologie additive per la produzione di device biomedicali. In particolare, il lavoro si è concentrato principalmente sulla realizzazione di due modelli, il primo per lo studio dello sviluppo dei black floaters all’interno del corpo vitreo dell’occhio, il secondo per l’emulazione del comportamento dell’osso mandibolare durante la foratura per l’installazione di impianti dentali.
Il modello dell’occhio è composto da due elementi principali, un supporto e un hydrogel. Il supporto serve a contenere e supportare l’hydrogel. Deve essere trasparente, biocompatibile facilmente manovrabile in laboratorio. La sua realizzazione è avvenuta tramite stereolitografia. L’hydrogel, invece, ha lo scopo di fornire un’ambiente 3D per la crescita e sviluppo delle cellule. Deve perciò anche lui essere biocompatibile e con adeguate caratteristiche meccaniche e di stampabilità. La struttura 3D è stata realizzata tramite material extrusion.
Il modello di osso mandibolare è stato realizzato tramite fused filament fabrication. Il modello si compone di due parti, una parte esterna piena per emulare l’osso corticale, e una parte interna porosa per emulare l’osso trabecolare. Le prove di foratura sono state realizzate con un trapano dentistico agganciato a robot collaborativi.
La ricerca ha infine toccato ulteriori due ambiti, lo studio delle proprietà di strutture lattice realizzate tramite laser based- powder bed fusion e la valutazione di diversi trattamenti di finitura superficiale.
La tesi, dunque, ha la seguente organizzazione. Il capitolo 1 presenta un’introduzione sull’additive manufacturing e il bioprinting. Le tecnologie ed i materiali utilizzati sono brevemente descritti e sono riportati alcuni esempi di applicazione della manifattura additiva nel campo biomedicale. I capitoli seguenti, invece, riportano gli articoli pubblicati o in corso di pubblicazione riguardo alle diverse tematiche affrontate. Nello specifico, il capitolo 2 riporta la ricerca sulle strutture lattice e la loro realizzazione. I capitoli 3 e 4 comprendono gli studi relativi al modello dell’occhio. Il capitolo 3 si concentra sulla realizzazione del supporto, il 4 sulla formulazione e la valutazione dell’hydrogel. Il capitolo 5 approfondisce lo studio del modello per l’emulazione del comportamento dell’osso mandibolare a foratura mentre il capitolo 6, l’ultimo di questo elaborato, si concentra sui processi di finitura superficiale.
Per concludere, la manifattura additiva include processi molto diversi tra loro, ma che presentano molti punti in comune come la flessibilità, libertà di progettazione e personalizzazione. Sfruttando queste proprietà è possibile realizzare oggetti su misura, soprattutto in campi come quello biomedicale dove la personalizzazione e la specificità sono fondamentali.The following thesis aims to study and to develop biomedical devices made through additive manufacturing. Additive manufacturing has been experiencing a strong growth in recent years, mainly due to its ability to easily realize complex geometries. This feature allows customization of products at a competitive cost. In addition, material waste is greatly reduced by the manufacturing principle. All these properties helped the recent years diffusion of additive manufacturing in fields such as automotive, aerospace and biomedical.
This thesis focuses on the use of some of the most popular additive technologies for the production of biomedical devices. In particular, the work focused mainly on the fabrication of two models, the first to study the development of black floaters within the vitreous body of the eye, and the second to emulate the mandibular bone behavior during drilling for the installation of dental implants.
The eye model consists of two main elements, a scaffold and a hydrogel. The scaffold contains and provides support to the hydrogel. It must be transparent, biocompatible easily handled in the laboratory. It is printed by stereolithography. The hydrogel, on the other hand, is intended to provide a 3D environment for cell growth and development. Therefore, it must be biocompatible and have adequate mechanical properties together with good printability. The 3D scaffold structure was made by material extrusion.
The mandibular bone model was made by fused filament fabrication. The model consists of two parts, a solid outer part to emulate cortical bone, and a porous inner part to emulate trabecular bone. Drilling tests were performed with a dental drill attached to collaborative robots.
Finally, the research covered two additional areas, the study of the properties of lattice structures made by laser-based- powder bed fusion and the evaluation of different surface finish treatments.
The following thesis, therefore, has the following organization. Chapter 1 presents an introduction on additive manufacturing and bioprinting. The technologies and materials used are briefly described, and examples of additive manufacturing applications in the biomedical field are given. The following chapters, on the other hand, report published or forthcoming articles regarding the various topics mentioned above. Specifically, Chapter 2 reports the research on lattice structures and their fabrication. Chapters 3 and 4 include studies related to the eye model. Chapter 3 focuses on the fabrication of the support, and Chapter 4 on the formulation and evaluation of the hydrogel. Chapter 5 presents the study of the model for emulating the behavior of mandibular bone upon drilling, while Chapter 6, the last of this work, focuses on surface finishing processes.
In conclusion, additive manufacturing includes various processes that are very different from each other but have many common points such as flexibility, freedom of design, and customization. By exploiting these properties, it is possible to make tailored objects, especially important in fields such as the biomedical one, where customization and specificity are a great added value
Recommended from our members
Ensuring Access to Safe and Nutritious Food for All Through the Transformation of Food Systems
Program and Proceedings: The Nebraska Academy of Sciences 1880-2023. 142th Anniversary Year. One Hundred-Thirty-Third Annual Meeting April 21, 2023. Hybrid Meeting: Nebraska Wesleyan University & Online, Lincoln, Nebraska
AERONAUTICS & SPACE SCIENCE Chairperson(s): Dr. Scott Tarry & Michaela Lucas
HUMANS PAST AND PRESENT Chairperson(s): Phil R. Geib & Allegra Ward
APPLIED SCIENCE & TECHNOLOGY SECTION Chairperson(s): Mary Ettel
BIOLOGY Chairpersons: Lauren Gillespie, Steve Heinisch, and Paul Davis
BIOMEDICAL SCIENCES Chairperson(s): Annemarie Shibata, Kimberly Carlson, Joseph Dolence, Alexis Hobbs, James Fletcher, Paul Denton
CHEM Section Chairperson(s): Nathanael Fackler
EARTH SCIENCES Chairpersons: Irina Filina, Jon Schueth, Ross Dixon, Michael Leite
ENVIRONMENTAL SCIENCE Chairperson: Mark Hammer
PHYSICS Chairperson(s): Dr. Adam Davis
SCIENCE EDUCATION Chairperson: Christine Gustafson
2023 Maiben Lecturer: Jason Bartz
2023 FRIEND OF SCIENCE AWARD TO: Ray Ward and Jim Lewi
2023-2024 Undergraduate Academic Catalog
https://digitalcommons.cedarville.edu/academic_catalogs/1128/thumbnail.jp
- …