Parallel simulation techniques for telecommunication network modelling

In this thesis, we consider the application of parallel simulation to the performance modelling of telecommunication networks. A largely automated approach was first explored using a parallelizing compiler to speed up the simulation of simple models of circuit-switched networks. This yielded reasonable results for relatively little effort compared with other approaches. However, more complex simulation models of packet- and cell-based telecommunication networks, requiring the use of discrete event techniques, need an alternative approach. A critical review of parallel discrete event simulation indicated that a distributed model components approach using conservative or optimistic synchronization would be worth exploring. Experiments were therefore conducted using simulation models of queuing networks and Asynchronous Transfer Mode (ATM) networks to explore the potential speed-up possible using this approach. Specifically, it is shown that these techniques can be used successfully to speed-up the execution of useful telecommunication network simulations. A detailed investigation has demonstrated that conservative synchronization performs very well for applications with good look ahead properties and sufficient message traffic density and, given such properties, will significantly outperform optimistic synchronization. Optimistic synchronization, however, gives reasonable speed-up for models with a wider range of such properties and can be optimized for speed-up and memory usage at run time. Thus, it is confirmed as being more generally applicable particularly as model development is somewhat easier than for conservative synchronization. This has to be balanced against the more difficult task of developing and debugging an optimistic synchronization kernel and the application models

An empirical evaluation of techniques for parallel simulation of message passing networks

209 p.[EN]In the field of computer design, simulation is an essential tool to validate and evaluate architectural proposals. Conventional simulation techniques, designed for their use in sequential computers, are too slow if the system to simulate is large or complex. The aim of this work is to search for techniques to accelerate simulations exploiting the parallelism available in current, commercial multicomputers, and to use these techniques to study a model of a message router. This router has been designed to constitute the communication infrastructure of a (hypothetical) massively parallel computer. Three parallel simulation techniques have been considered: synchronous, asynchronous-conservative and asynchronous-optimistic. These algorithms have been implemented in three multicomputers: a transputer-based Supernode, an Intel Paragon and a network of workstations. The influence that factors such as the characteristics of the simulated models, the organization of the simulators and the characteristics of the target multicomputers have in the performance of the simulations has been measured and characterized. It is concluded that optimistic parallel simulation techniques are not suitable for the considered kind of models, although they may provide good performance in other environments. A network of workstations is not the right platform for our experiments, because the communication demands of the parallel simulators surpass the abilities of local area networks—the granularity is too fine. Synchronous and conservative parallel simulation techniques perform very well in the Supernode and in the Paragon, specially if the model to simulate is complex or large—precisely the worst case for traditional, sequential simulators. This way, studies previously considered as unrealizable, due to their exceedingly high computational cost, can be performed in reasonable times. Additionally, the spectrum of possibilities of using multicomputers can be broadened to execute more than numeric applications.[ES]En el ámbito del diseño de computadores, la simulación es una herramienta imprescindible para la validación y evaluación de cualquier propuesta arquitectónica. Las ténicas convencionales de simulación, diseñadas para su utilización en computadores secuenciales, son demasiado lentas si el sistema a simular es grande o complejo. El objetivo de esta tesis es buscar técnicas para acelerar estas simulaciones, aprovechando el paralelismo disponible en multicomputadores comerciales, y usar esas técnicas para el estudio de un modelo de encaminador de mensajes. Este encaminador está diseñado para formar infraestructura de comunicaciones de un hipotético computador masivamente paralelo. En este trabajo se consideran tres técnicas de simulación paralela: síncrona, asíncrona-conservadora y asíncrona-optimista. Estos algoritmos se han implementado en tres multicomputadores: un Supernode basado en Transputers, un Intel Paragon y una red de estaciones de trabajo. Se caracteriza la influencia que tienen en las prestaciones de los simuladores aspectos tales como los parámetros del modelo simulado, la organización del simulador y las características del multicomputador utilizado. Se concluye que las técnicas de simulación paralela optimista no resultan adecuadas para trabajar con el modelo considerado, aunque pueden ofrecer un buen rendimiento en otros entornos. La red de estaciones de trabajo no resulta una plataforma apropiada para estas simulaciones, ya que una red local no reúne condiciones para la ejecución de aplicaciones paralelas de grano fino. Las técnicas de simulación paralela síncrona y conservadora dan muy buenos resultados en el Supernode y en el Paragon, especialmente si el modelo a simular es complejo o grande—precisamente el peor caso para los algoritmos secuenciales. De esta forma, estudios previamente considerados inviables, por ser demasiado costosos computacionalmente, pueden realizarse en tiempos razonables. Además, se amplía el espectro de posibilidades de los multicomputadores, utilizándolos para algo más que aplicaciones numéricas.Este trabajo ha sido parcialmente subvencionado por la Comisión Interministerial de Ciencia y Tecnología, bajo contrato TIC95-037

Logical partitioning of parallel system simulations

Simulation has been a fundamental tool to prototype, hypothesize, and evaluate new ideas to continue improving system performance. However, increasing levels of processor parallelism and heterogeneity have introduced additional constraints when evaluating new designs. The work embodied in this dissertation explores how to leverage novel ideas in simulator partitioning to improve simulator speed and flexibility for simulating these new types of systems. The contribution of this work includes the introduction of optimistic partitioned simulation to improve parallelization, and the introduction of warped partitioned simulation for improved flexibility. These ideas are refined and demonstrated through the use of prototypes to demonstrate their benefits compared to state-of-the-art approaches. By leveraging partitioning in a structured manner, it is possible to design simulators that better address the open challenges of parallel and heterogeneous systems design.Electrical and Computer Engineerin

Accelerated Molecular Dynamics for the Exascale

A range of specialized Molecular Dynamics (MD) methods have been developed in order to overcome the challenge of reaching longer timescales in systems that evolve through sequences of rare events. In this talk, we consider Parallel Trajectory Splicing (ParSplice) which works by generating large number of MD trajectory segments in parallel in such a way that they can later be assembled into a single statistically correct state-to-state trajectory, enabling parallel speedups up to N, the number of parallel workers. The prospect of strong-scaling MD is extremely enticing given the continuously increasing scale of available computational resources: on current peta-scale platforms N can be in the hundreds of thousands, which opens the door to MD-accurate millisecond-long atomistic simulations; extending such a capability into the exascale era could be transformative.In practice, however, the ability for ParSplice to scale increasingly relies on predicting where the trajectory will be found in the future. With this insight in mind, we develop a maximum likelihood transition model that is updated on the fly and make use of an uncertainty-driven estimator to approximate the optimal distribution of trajectory segments to be generated next. In addition, we investigate resource optimization schemes designed to fully utilize computational resources in order to generate the maximum expected throughput

A new approach to reversible computing with applications to speculative parallel simulation

In this thesis, we propose an innovative approach to reversible computing that shifts the focus from the operations to the memory outcome of a generic program. This choice allows us to overcome some typical challenges of "plain" reversible computing. Our methodology is to instrument a generic application with the help of an instrumentation tool, namely Hijacker, which we have redesigned and developed for the purpose. Through compile-time instrumentation, we enhance the program's code to keep track of the memory trace it produces until the end. Regardless of the complexity behind the generation of each computational step of the program, we can build inverse machine instructions just by inspecting the instruction that is attempting to write some value to memory. Therefore from this information, we craft an ad-hoc instruction that conveys this old value and the knowledge of where to replace it. This instruction will become part of a more comprehensive structure, namely the reverse window. Through this structure, we have sufficient information to cancel all the updates done by the generic program during its execution. In this writing, we will discuss the structure of the reverse window, as the building block for the whole reversing framework we designed and finally realized. Albeit we settle our solution in the specific context of the parallel discrete event simulation (PDES) adopting the Time Warp synchronization protocol, this framework paves the way for further general-purpose development and employment. We also present two additional innovative contributions coming from our innovative reversibility approach, both of them still embrace traditional state saving-based rollback strategy. The first contribution aims to harness the advantages of both the possible approaches. We implement the rollback operation combining state saving together with our reversible support through a mathematical model. This model enables the system to choose in autonomicity the best rollback strategy, by the mutable runtime dynamics of programs. The second contribution explores an orthogonal direction, still related to reversible computing aspects. In particular, we will address the problem of reversing shared libraries. Indeed, leading from their nature, shared objects are visible to the whole system and so does every possible external modification of their code. As a consequence, it is not possible to instrument them without affecting other unaware applications. We propose a different method to deal with the instrumentation of shared objects. All our innovative proposals have been assessed using the last generation of the open source ROOT-Sim PDES platform, where we integrated our solutions. ROOT-Sim is a C-based package implementing a general purpose simulation environment based on the Time Warp synchronization protocol

Improving Large-Scale Network Traffic Simulation with Multi-Resolution Models

Simulating a large-scale network like the Internet is a challenging undertaking because of the sheer volume of its traffic. Packet-oriented representation provides high-fidelity details but is computationally expensive; fluid-oriented representation offers high simulation efficiency at the price of losing packet-level details. Multi-resolution modeling techniques exploit the advantages of both representations by integrating them in the same simulation framework. This dissertation presents solutions to the problems regarding the efficiency, accuracy, and scalability of the traffic simulation models in this framework. The ``ripple effect\u27\u27 is a well-known problem inherent in event-driven fluid-oriented traffic simulation, causing explosion of fluid rate changes. Integrating multi-resolution traffic representations requires estimating arrival rates of packet-oriented traffic, calculating the queueing delay upon a packet arrival, and computing packet loss rate under buffer overflow. Real time simulation of a large or ultra-large network demands efficient background traffic simulation. The dissertation includes a rate smoothing technique that provably mitigates the ``ripple effect\u27\u27, an accurate and efficient approach that integrates traffic models at multiple abstraction levels, a sequential algorithm that achieves real time simulation of the coarse-grained traffic in a network with 3 tier-1 ISP (Internet Service Provider) backbones using an ordinary PC, and a highly scalable parallel algorithm that simulates network traffic at coarse time scales

Parallel and Distributed Computing

The 14 chapters presented in this book cover a wide variety of representative works ranging from hardware design to application development. Particularly, the topics that are addressed are programmable and reconfigurable devices and systems, dependability of GPUs (General Purpose Units), network topologies, cache coherence protocols, resource allocation, scheduling algorithms, peertopeer networks, largescale network simulation, and parallel routines and algorithms. In this way, the articles included in this book constitute an excellent reference for engineers and researchers who have particular interests in each of these topics in parallel and distributed computing