28,239 research outputs found

    Multiple Beamforming with Perfect Coding

    Full text link
    Perfect Space-Time Block Codes (PSTBCs) achieve full diversity, full rate, nonvanishing constant minimum determinant, uniform average transmitted energy per antenna, and good shaping. However, the high decoding complexity is a critical issue for practice. When the Channel State Information (CSI) is available at both the transmitter and the receiver, Singular Value Decomposition (SVD) is commonly applied for a Multiple-Input Multiple-Output (MIMO) system to enhance the throughput or the performance. In this paper, two novel techniques, Perfect Coded Multiple Beamforming (PCMB) and Bit-Interleaved Coded Multiple Beamforming with Perfect Coding (BICMB-PC), are proposed, employing both PSTBCs and SVD with and without channel coding, respectively. With CSI at the transmitter (CSIT), the decoding complexity of PCMB is substantially reduced compared to a MIMO system employing PSTBC, providing a new prospect of CSIT. Especially, because of the special property of the generation matrices, PCMB provides much lower decoding complexity than the state-of-the-art SVD-based uncoded technique in dimensions 2 and 4. Similarly, the decoding complexity of BICMB-PC is much lower than the state-of-the-art SVD-based coded technique in these two dimensions, and the complexity gain is greater than the uncoded case. Moreover, these aforementioned complexity reductions are achieved with only negligible or modest loss in performance.Comment: accepted to journa

    Golden Space-Time Trellis Coded Modulation

    Full text link
    In this paper, we present a concatenated coding scheme for a high rate 2×22\times 2 multiple-input multiple-output (MIMO) system over slow fading channels. The inner code is the Golden code \cite{Golden05} and the outer code is a trellis code. Set partitioning of the Golden code is designed specifically to increase the minimum determinant. The branches of the outer trellis code are labeled with these partitions. Viterbi algorithm is applied for trellis decoding. In order to compute the branch metrics a lattice sphere decoder is used. The general framework for code optimization is given. The performance of the proposed concatenated scheme is evaluated by simulation. It is shown that the proposed scheme achieves significant performance gains over uncoded Golden code.Comment: 33 pages, 13 figure

    Space-time coding techniques with bit-interleaved coded modulations for MIMO block-fading channels

    Full text link
    The space-time bit-interleaved coded modulation (ST-BICM) is an efficient technique to obtain high diversity and coding gain on a block-fading MIMO channel. Its maximum-likelihood (ML) performance is computed under ideal interleaving conditions, which enables a global optimization taking into account channel coding. Thanks to a diversity upperbound derived from the Singleton bound, an appropriate choice of the time dimension of the space-time coding is possible, which maximizes diversity while minimizing complexity. Based on the analysis, an optimized interleaver and a set of linear precoders, called dispersive nucleo algebraic (DNA) precoders are proposed. The proposed precoders have good performance with respect to the state of the art and exist for any number of transmit antennas and any time dimension. With turbo codes, they exhibit a frame error rate which does not increase with frame length.Comment: Submitted to IEEE Trans. on Information Theory, Submission: January 2006 - First review: June 200

    Bit-Interleaved Coded Multiple Beamforming with Perfect Coding

    Full text link
    When the Channel State Information (CSI) is known by both the transmitter and the receiver, beamforming techniques employing Singular Value Decomposition (SVD) are commonly used in Multiple-Input Multiple-Output (MIMO) systems. Without channel coding, there is a trade-off between full diversity and full multiplexing. When channel coding is added, both of them can be achieved as long as the code rate Rc and the number of employed subchannels S satisfy the condition RcS<=1. By adding a properly designed constellation precoder, both full diversity and full multiplexing can be achieved for both uncoded and coded systems with the trade-off of a higher decoding complexity, e.g., Fully Precoded Multiple Beamforming (FPMB) and Bit-Interleaved Coded Multiple Beamforming with Full Precoding (BICMB-FP) without the condition RcS<=1. Recently discovered Perfect Space-Time Block Code (PSTBC) is a full-rate full-diversity space-time code, which achieves efficient shaping and high coding gain for MIMO systems. In this paper, a new technique, Bit-Interleaved Coded Multiple Beamforming with Perfect Coding (BICMB-PC), is introduced. BICMB-PC transmits PSTBCs through convolutional coded SVD systems. Similar to BICMB-FP, BICMB-PC achieves both full diversity and full multiplexing, and its performance is almost the same as BICMB-FP. The advantage of BICMB-PC is that it can provide a much lower decoding complexity than BICMB-FP, since the real and imaginary parts of the received signal can be separated for BICMB-PC of dimensions 2 and 4, and only the part corresponding to the coded bit is required to acquire one bit metric for the Viterbi decoder.Comment: accepted to conference; Proc. IEEE ICC 201

    Golden Coded Multiple Beamforming

    Full text link
    The Golden Code is a full-rate full-diversity space-time code, which achieves maximum coding gain for Multiple-Input Multiple-Output (MIMO) systems with two transmit and two receive antennas. Since four information symbols taken from an M-QAM constellation are selected to construct one Golden Code codeword, a maximum likelihood decoder using sphere decoding has the worst-case complexity of O(M^4), when the Channel State Information (CSI) is available at the receiver. Previously, this worst-case complexity was reduced to O(M^(2.5)) without performance degradation. When the CSI is known by the transmitter as well as the receiver, beamforming techniques that employ singular value decomposition are commonly used in MIMO systems. In the absence of channel coding, when a single symbol is transmitted, these systems achieve the full diversity order provided by the channel. Whereas this property is lost when multiple symbols are simultaneously transmitted. However, uncoded multiple beamforming can achieve the full diversity order by adding a properly designed constellation precoder. For 2 \times 2 Fully Precoded Multiple Beamforming (FPMB), the general worst-case decoding complexity is O(M). In this paper, Golden Coded Multiple Beamforming (GCMB) is proposed, which transmits the Golden Code through 2 \times 2 multiple beamforming. GCMB achieves the full diversity order and its performance is similar to general MIMO systems using the Golden Code and FPMB, whereas the worst-case decoding complexity of O(sqrt(M)) is much lower. The extension of GCMB to larger dimensions is also discussed.Comment: accepted to conferenc

    Surface structure of i-Al(68)Pd(23)Mn(9): An analysis based on the T*(2F) tiling decorated by Bergman polytopes

    Full text link
    A Fibonacci-like terrace structure along a 5fold axis of i-Al(68)Pd(23)Mn(9) monograins has been observed by T.M. Schaub et al. with scanning tunnelling microscopy (STM). In the planes of the terraces they see patterns of dark pentagonal holes. These holes are well oriented both within and among terraces. In one of 11 planes Schaub et al. obtain the autocorrelation function of the hole pattern. We interpret these experimental findings in terms of the Katz-Gratias-de Boisseu-Elser model. Following the suggestion of Elser that the Bergman clusters are the dominant motive of this model, we decorate the tiling T*(2F) by the Bergman polytopes only. The tiling T*(2F) allows us to use the powerful tools of the projection techniques. The Bergman polytopes can be easily replaced by the Mackay polytopes as the decoration objects. We derive a picture of ``geared'' layers of Bergman polytopes from the projection techniques as well as from a huge patch. Under the assumption that no surface reconstruction takes place, this picture explains the Fibonacci-sequence of the step heights as well as the related structure in the terraces qualitatively and to certain extent even quantitatively. Furthermore, this layer-picture requires that the polytopes are cut in order to allow for the observed step heights. We conclude that Bergman or Mackay clusters have to be considered as geometric building blocks of the i-AlPdMn structure rather than as energetically stable entities
    • …
    corecore