Digital implementation of the cellular sensor-computers

Two different kinds of cellular sensor-processor architectures are used nowadays in various applications. The first is the traditional sensor-processor architecture, where the sensor and the processor arrays are mapped into each other. The second is the foveal architecture, in which a small active fovea is navigating in a large sensor array. This second architecture is introduced and compared here. Both of these architectures can be implemented with analog and digital processor arrays. The efficiency of the different implementation types, depending on the used CMOS technology, is analyzed. It turned out, that the finer the technology is, the better to use digital implementation rather than analog

A systematic algorithm development for image processing feature extraction in automatic visual inspection : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in the Department of Production Technology, Massey University

Image processing techniques applied to modern quality control are described together with the development of feature extraction algorithms for automatic visual inspection. A real-time image processing hardware system already available in the Department of Production Technology is described and has been tested systematically for establishing an optimal threshold function. This systematic testing has been concerned with edge strength and system noise information. With the a priori information of system signal and noise, non-linear threshold functions have been established for real time edge detection. The performance of adaptive thresholding is described and the usefulness of this nonlinear approach is demonstrated from results using machined test samples. Examination and comparisons of thresholding techniques applied to several edge detection operators are presented. It is concluded that, the Roberts' operator with a non-linear thresholding function has the advantages of being simple, fast, accurate and cost effective in automatic visual inspection

An information adaptive system study report and development plan

The purpose of the information adaptive system (IAS) study was to determine how some selected Earth resource applications may be processed onboard a spacecraft and to provide a detailed preliminary IAS design for these applications. Detailed investigations of a number of applications were conducted with regard to IAS and three were selected for further analysis. Areas of future research and development include algorithmic specifications, system design specifications, and IAS recommended time lines

Terrestrial applications: An intelligent Earth-sensing information system

For Abstract see A82-2214

Automatic refocus and feature extraction of single-look complex SAR signatures of vessels

In recent years, spaceborne synthetic aperture radar ( SAR) technology has been considered as a complement to cooperative vessel surveillance systems thanks to its imaging capabilities. In this paper, a processing chain is presented to explore the potential of using basic stripmap single-look complex ( SLC) SAR images of vessels for the automatic extraction of their dimensions and heading. Local autofocus is applied to the vessels' SAR signatures to compensate blurring artefacts in the azimuth direction, improving both their image quality and their estimated dimensions. For the heading, the orientation ambiguities of the vessels' SAR signatures are solved using the direction of their ground-range velocity from the analysis of their Doppler spectra. Preliminary results are provided using five images of vessels from SLC RADARSAT-2 stripmap images. These results have shown good agreement with their respective ground-truth data from Automatic Identification System ( AIS) records at the time of the acquisitions.Postprint (published version

Program planning, chapter 5, part D

Recommendations for future activities necessary to support satellite microwave sensing are reported. Areas covered include component development, data processing, calibration, design and fabrication of multifrequency systems, and experimental test programs to establish interactions of electromagnetic waves and sensed parameters