Modelação interpretativa da segurança e emissões em corredores de rotundas e semáforos

Scientific research has demonstrated that the operational, environmental and safety performance for pedestrians depend on the geometric and traffic stream characteristics of the roundabout. However, the implementation of roundabouts may result in a trade-off among capacity, environmental, and safety variables. Also, little is known about the potential impacts for traffic from the use of functionally interdependent roundabouts in series along corridors. Thus, this doctoral thesis stresses the importance of understanding in how roundabout corridors affect traffic performance, vehicular emissions and safety for vulnerable users as pedestrians. The development of a methodology capable of integrating corridor’s geometric and operational elements is a contribution of this work. The main objectives of the thesis are as follows: 1) to analyze the effect of corridor’s design features in the acceleration patterns and emissions; 2) to understand the differences in the spatial distribution of emissions between roundabouts in isolation and along corridors; 3) to compare corridors with different forms of intersections such as conventional roundabouts, turbo-roundabouts, traffic lights and stop-controlled intersections; and 4) to design corridor-specific characteristics to optimize vehicle delay, and global (carbon dioxide – CO2) and local (carbon monoxide – CO, nitrogen oxides – NOX and hydrocarbons – HC) pollutant emissions. Vehicle dynamics along with traffic and pedestrian flow data were collected from 12 corridors with conventional roundabouts located in Portugal, Spain and in the United States, 3 turbo-roundabout corridors in the Netherlands, and 1 mixed roundabout/traffic-lights/stop-controlled corridor in Portugal. Data for approximately 2,000 km of road coverage over the course of 50 h have been collected. Subsequently, a microscopic platform of traffic (VISSIM), emissions (Vehicle Specific Power – VSP) and safety (Surrogate Safety Assessment Model – SSAM) was introduced to faithful reproduce site-specific operations and to examine different alternative scenarios. The main research findings showed that the spacing between intersections influenced vehicles acceleration-deceleration patterns and emissions. In contrast, the deflection angle at the entrances (element that impacts emissions on isolated roundabouts) impacted slightly on the spatial distribution of emissions. It was also found that the optimal crosswalk locations along mid-block sections in roundabout corridor was generally controlled by spacing, especially in the case of short spacing between intersections (< 200 m). The implementation of turbo-roundabout in series along corridors increased emissions compared to conventional two-lane roundabout corridors (1-5%, depending on the pollutant). By changing the location of a roundabout or turbo-roundabout to increase spacing in relation to upstream/downstream intersection resulted in an improvement of corridor emissions. Under conditions of high through traffic and unbalanced traffic flows between main roads and minor roads, vehicles along roundabout corridors produced fewer emissions (~5%) than did vehicles along signalized corridors, but they emitted more gases (~12%) compared to a corridor with stop-controlled intersections. This research contributed to the current state-of-art by proving a full comprehension about the operational and geometric benefits and limitations of roundabout corridors. It also established correlations between geometric variable of corridors (spacing), crosswalk locations or traffic streams, and delay, and CO2, CO, NOX or HC variables. With this research, it has been demonstrated that the implementation of a given intersection form within a corridor focused on minimizing CO2 may not be translated to other variables such as CO or NOX. Therefore, the develop methodology is a decision supporting tool capable of assessing and selecting suitable traffic controls according the site-specific needs.Estudos anteriores demonstram que os desempenhos operacional, ambiental e ao nível da segurança para os peões de uma rotunda dependem das suas características geométricas e dos fluxos de tráfego e de peões. Porém, a implementação de uma rotunda pode traduzir-se numa avaliação de compromisso entre as variáveis da capacidade, emissões de poluentes e segurança. Para além disso, a informação relativa às potencialidades de rotundas interdependentes ao longo de corredores é diminuta. Assim, esta tese de doutoramento centra-se na compreensão dos impactos no desempenho do tráfego, emissões e segurança dos peões inerentes ao funcionamento de corredores de rotundas. Uma das contribuições deste trabalho é o desenvolvimento de uma metodologia capaz de avaliar as características geométricas e operacionais dos corredores de forma integrada. Os principais objetivos desta tese são: 1) analisar o impacto dos elementos geométricos dos corredores de rotundas em termos dos perfis de aceleração e das emissões; 2) investigar as principais diferenças na distribuição espacial das emissões entre rotundas isoladas e em corredores; 3) comparar os desempenhos operacional e ambiental de corredores com diferentes tipos de interseções tais como rotundas convencionais, turbo-rotundas, cruzamentos semaforizados e interseções prioritárias; e 4) dimensionar um corredor de modo a otimizar o atraso dos veículos, e emissões de poluentes globais (dióxido de carbono – CO2) e locais (monóxido de carbono – CO, óxidos de azoto – NOx e hidrocarbonetos – HC). O trabalho de monitorização experimental consistiu na recolha de dados da dinâmica do veículo, e volumes de tráfego e pedonais. Para tal, foram selecionados 12 corredores com rotundas convencionais em Portugal, Espanha e Estados Unidos da América, 3 corredores com turbo-rotundas na Holanda e ainda um corredor misto com rotundas, sinais luminosos e interseções prioritárias em Portugal. No total foram recolhidos aproximadamente 2000 km de dados da dinâmica do veículo, num total de 50 h. Foi utilizada uma plataforma de modelação microscópica de tráfego (VISSIM), emissões (Vehicle Specific Power – VSP) e segurança (Surrogate Safety Assessment Model – SSAM) de modo a replicar as condições de tráfego locais e avaliar cenários alternativos. Os resultados mostraram que o espaçamento entre interseções teve um impacto significativo nos perfis de aceleração e emissões. No entanto, tal não se verificou para o ângulo de deflexão de entrada (elemento fulcral nos níveis de emissões em rotundas isoladas), nomeadamente nos casos em que as rotundas adjacentes estavam próximas (< 200 m). A implementação de corredores de turbo-rotundas conduziu ao aumento das emissões face a um corredor convencional de rotundas com duas vias (1-5%, dependendo do poluente). A relocalização de uma rotunda ou turbo-rotunda no interior do corredor, de modo a aumentar o espaçamento em relação a uma interseção a jusante e/ou a montante, levou a uma melhoria das emissões do corredor. Conclui-se também que em condições de elevado tráfego de atravessamento e não uniformemente distribuído entre as vias principais e secundárias, os veículos ao longo de um corredor com rotundas produziram menos emissões (~5%) face a um corredor com semáforos, mas emitiram mais gases (~12%) comparativamente a um corredor de interseções prioritárias. Esta investigação contribuiu para o estado de arte através da análise detalhada dos benefícios e limitações dos corredores de rotundas tanto ao nível geométrico como ao nível operacional. Adicionalmente, estabeleceram-se várias correlações entre variáveis geométricas do corredor (espaçamento), localização das passadeiras e volume de tráfego, o atraso, e emissões de CO2, CO, NOX e HC. Demonstrou-se ainda que a implementação de uma interseção ao longo do corredor com a finalidade de minimizar o CO2 pode não resultar na melhoria de outras variáveis tais como o CO ou NOX. Esta metodologia serve como apoio à decisão e, portanto, permite avaliar o tipo de interseção mais adequado de acordo com as especificidades de cada local.Programa Doutoral em Engenharia Mecânic

Efficient Automated Driving Strategies Leveraging Anticipation and Optimal Control

Automated vehicles and advanced driver assistance systems bring computation, sensing, and communication technologies that exceed human abilities in some ways. For example, automated vehicles may sense a panorama all at once, do not suffer from human impairments and distractions, and could wirelessly communicate precise data with neighboring vehicles. Prototype and commercial deployments have demonstrated the capability to relieve human operators of some driving tasks up to and including fully autonomous taxi rides in some areas. The ultimate impact of this technology’s large-scale market penetration on energy efficiency remains unclear, with potential negative factors like road use by empty vehicles competing with positive ones like automatic eco-driving. Fundamentally enabled by historic and look-ahead data, this dissertation addresses the use of automated driving and driver assistance to optimize vehicle motion for energy efficiency. Facets of this problem include car following, co-optimized acceleration and lane change planning, and collaborative multi-agent guidance. Optimal control, especially model predictive control, is used extensively to improve energy efficiency while maintaining safe and timely driving via constraints. Techniques including chance constraints and mixed integer programming help overcome uncertainty and non-convexity challenges. Extensions of these techniques to tractor trailers on sloping roads are provided by making use of linear parameter-varying models. To approach the wheel-input energy eco-driving problem over generally shaped sloping roads with the computational potential for closed-loop implementation, a linear programming formulation is constructed. Distributed and collaborative techniques that enable connected and automated vehicles to accommodate their neighbors in traffic are also explored and compared to centralized control. Using simulations and vehicle-in-the-loop car following experiments, the proposed algorithms are benchmarked against others that do not make use of look-ahead information

Platoon Merging Approach Based on Hybrid Trajectory Planning and CACC Strategies

Currently, the increase of transport demands along with the limited capacity of the road network have increased traffic congestion in urban and highway scenarios. Technologies such as Cooperative Adaptive Cruise Control (CACC) emerge as efficient solutions. However, a higher level of cooperation among multiple vehicle platoons is needed to improve, effectively, the traffic flow. In this paper, a global solution to merge two platoons is presented. This approach combines: (i) a longitudinal controller based on a feed-back/feed-forward architecture focusing on providing CACC capacities and (ii) hybrid trajectory planning to merge platooning on straight paths. Experiments were performed using Tecnalia’s previous basis. These are the AUDRIC modular architecture for automated driving and the highly reliable simulation environment DYNACAR. A simulation test case was conducted using five vehicles, two of them executing the merging and three opening the gap to the upcoming vehicles. The results showed the good performance of both domains, longitudinal and lateral, merging multiple vehicles while ensuring safety and comfort and without propagating speed changes.This research was supported by the European Project SHOW from the Horizon 2020 program under Grant Agreement No. 875530

Traffic Network Control from Temporal Logic Specifications

We propose a framework for generating a signal control policy for a traffic network of signalized intersections to accomplish control objectives expressible using linear temporal logic. By applying techniques from model checking and formal methods, we obtain a correct-by-construction controller that is guaranteed to satisfy complex specifications. To apply these tools, we identify and exploit structural properties particular to traffic networks that allow for efficient computation of a finite state abstraction. In particular, traffic networks exhibit a componentwise monotonicity property which allows reach set computations that scale linearly with the dimension of the continuous state space

Impacte da interação entre veículos motorizados e bicicletas na escolha de rota, desempenho de tráfego, emissões e segurança

Mobility in urban areas is highly complex because of the variety of possible facilities and routes, the multitude of origins and destinations, the increase of population and traffic. Increased use of active modes, such as cycling, presents economic and environmental benefits, and contributes to health improvement. However, it can lead to safety concerns such as bicycles sudden or unexpected movements mainly when circulating together with motor vehicles (MVs) or when there is an overtaking situation between MVs and bicycles. The main goal of this doctoral thesis is to quantify and assess the impact of the interaction motor vehicle-bicycle on traffic performance, road safety and emissions to define a multi-objective analysis model of the impacts regarding the use of motor vehicle and/or bicycle. The thesis was focused on three main topics developed based on the evaluation of traffic performance, safety and emissions at urban areas : (i) to perform a multi-objective analysis in an integrated manner of the traffic performance, pollutant emissions and road conflicts between bicycles and MVs at a signalized intersection; (ii) to assess the driving volatility in MV-bicycle interactions at two-lane roundabouts and its impacts on safety, pollutant emissions and traffic performance; and (iii) to analyze the impacts of the overtaking lateral distance between a bicycle and a MV on road safety and energy consumption at two-lane urban roads. Second-by-second bicycle and vehicle dynamic data were collected using GPS travel recorders. The methodology developed in this thesis was applied based on real world case studies at different urban road types in the city of Aveiro, Portugal. The present work uses a microscopic simulation platform of traffic (VISSIM), road safety (Surrogate Safety Assessment Methodology – SSAM) and emissions (Vehicle Specific Power – VSP) to analyze traffic operations, road safety concerns and to estimate carbon dioxide (CO2), nitrogen oxide (NOX), carbon monoxide (CO), and hydrocarbons (HC) pollutant emissions. Furthermore, the Fast Non-Dominated Sorting Genetic Algorithm (NSGA-II) was used in order to address the multi-objective analysis of traffic performance, road conflicts between MVs and bicycles, and emissions. Bicycle Specific Power (BSP) and VSP concepts were used in order to analyze the impacts on cyclist and vehicle energy consumption as well. The findings showed that roundabouts present, in general, better traffic performance (number of stops and travel time reduced in 78% and 14%, respectively) and less emissions (CO2, NOX, and HC decreased 9%, 7%, and 12%, respectively) than other intersections, even with high demand of cyclists (270 bicycles per hour). Regarding safety, roundabout layout lead to more severe conflicts and potential crashes while the number of total conflicts can be reduced significantly (-49%). It was also found that the impact of MVs and bicycles speeds, as well as roundabout design, were more important factors than bicycle volumes at roundabouts. Considering the MV-bicycle interaction at two-lane roundabout, the results of emissions dictated good relationships (R2 > 70%) between acceleration and VSP modes distributions. Finally, the findings showed 50% of overtaking lateral distance (between bicycle and MV) lower than 0.5m in both morning and afternoon peak hours. Moreover, it was found that there was a good fit between overtaking lateral distance and traffic volumes in morning (R2 = 72%) and afternoon (R2 = 67%) peak hours. The findings of this research can be useful for policy makers of the mobility and road safety fields, municipalities, road designers, and traffic engineers.A complexidade inerente à mobilidade em áreas urbanas está associada ao excesso de tráfego e à multiplicidade de origem-destinos, rotas e motivos de viagem. O incremento do uso dos modos suaves, nomeadamente da bicicleta, apresenta benefícios económicos e ambientais, contribuindo para a melhoria da saúde. No entanto, a presença de bicicletas acarreta preocupações ao nível da segurança dos ciclistas. As questões de segurança podem estar relacionadas com movimentos súbitos ou inesperados dos ciclistas, principalmente quando circulam em conjunto com veículos motorizados (VMs), ou quando há uma situação de ultrapassagem entre VMs e bicicletas. O principal objetivo da Tese de Doutoramento consistiu em quantificar e avaliar o impacto da interação entre veículos motorizados e bicicletas ao nível do desempenho de tráfego, segurança rodoviária e emissões para definir um modelo de análise multiobjetivo. A tese foi focada em três tópicos principais, desenvolvidos com base na avaliação do desempenho do tráfego, segurança e emissões em áreas urbanas: (i) análise multiobjetivo de forma integrada do desempenho do tráfego, emissões poluentes e conflitos rodoviários entre bicicletas e VMs em intersecções sinalizadas; (ii) avaliação da volatilidade de condução em interações VM-bicicleta em rotundas de duas vias e seus impactos na segurança, emissões de poluentes e desempenho de tráfego; e (iii) análise dos impactos ao nível de segurança rodoviária e consumo de energia em vias urbanas, com a avaliaçao da distância lateral de ultrapassagem entre uma bicicleta e um VM. Os dados da dinâmica do velocípede e do VM foram recolhidos e gravados segundo a segundo com um GPS. A metodologia desenvolvida nesta tese foi aplicada tendo por base os estudos de caso associados a diferentes tipos de vias urbanas na cidade de Aveiro, Portugal. O presente trabalho utiliza uma plataforma de simulação microscópica de tráfego (VISSIM), segurança rodoviária (SSAM) e emissões (Potência Específica do Veículo - VSP) para analisar as operações relacionadas com tráfego, questões com segurança rodoviária e estimar o dióxido de carbono (CO2), emissões de poluentes como o óxido de azoto (NOX), monóxido de carbono (CO) e hidrocarbonetos (HC). Além disso, para a análise multiobjetivo do desempenho do tráfego, conflitos rodoviários entre VMs e bicicletas, e emissões, o algoritmo genético NSGA-II (Nondominated sorted genetic algorithm II) foi utilizado. As metodologias de Potência Específica de Bicicleta (BSP) e VSP foram usados para analisar os impactos no consumo de energia do ciclista e do veículo, respetivamente. Os resultados mostraram que, em geral, as rotundas apresentam melhor desempenho de tráfego (número de paragens e tempo de viagem reduzidos em 78% e 14%, respetivamente) e menores emissões (CO2, NOX e HC diminuíram 9%, 7% e 12%, respetivamente) quando comparadas a outras interseções, mesmo com elevados níveis de ciclistas (270 bicicletas por hora). Em relação à segurança, o design da rotunda tende a favorecer a ocorrência de conflitos mais graves e potenciais acidentes, apesar do número total de conflitos poder diminuir significativamente (menos 49%). Descobriu-se também que o impacto das velocidades de circulação dos VMs e das bicicletas, bem como o design da rotunda constituem fatores mais importantes do que o volume de ciclistas nas rotundas. Considerando a interação VM-bicicleta numa rotunda de duas vias, os resultados das emissões sugerem boas relações (R2> 70%) entre as distribuições dos modos de aceleração e VSP. Por fim, os resultados mostraram que em 50% das ultrapassagens a distância lateral entre o velocípede e o VM foi menor que 0,5m, tanto na hora de ponta da manhã como da tarde. Além disso, verificou-se um bom ajuste entre a distância lateral de ultrapassagem e os volumes de tráfego nas horas de ponta da manhã (R2 = 72%) e da tarde (R2 = 67%). A metodologia e resultados desta investigação poderão ser utilizados por decisores políticos na área da mobilidade e da segurança rodoviária, câmaras, gestores e engenheiros de tráfego.Programa Doutoral em Engenharia Mecânic

IEEE Access Special Section Editorial: Big Data Technology and Applications in Intelligent Transportation

During the last few years, information technology and transportation industries, along with automotive manufacturers and academia, are focusing on leveraging intelligent transportation systems (ITS) to improve services related to driver experience, connected cars, Internet data plans for vehicles, traffic infrastructure, urban transportation systems, traffic collaborative management, road traffic accidents analysis, road traffic flow prediction, public transportation service plan, personal travel route plans, and the development of an effective ecosystem for vehicles, drivers, traffic controllers, city planners, and transportation applications. Moreover, the emerging technologies of the Internet of Things (IoT) and cloud computing have provided unprecedented opportunities for the development and realization of innovative intelligent transportation systems where sensors and mobile devices can gather information and cloud computing, allowing knowledge discovery, information sharing, and supported decision making. However, the development of such data-driven ITS requires the integration, processing, and analysis of plentiful information obtained from millions of vehicles, traffic infrastructures, smartphones, and other collaborative systems like weather stations and road safety and early warning systems. The huge amount of data generated by ITS devices is only of value if utilized in data analytics for decision-making such as accident prevention and detection, controlling road risks, reducing traffic carbon emissions, and other applications which bring big data analytics into the picture