Exploring the Front Touch Interface for Virtual Reality Headsets

In this paper, we propose a new interface for virtual reality headset: a touchpad in front of the headset. To demonstrate the feasibility of the front touch interface, we built a prototype device, explored VR UI design space expansion, and performed various user studies. We started with preliminary tests to see how intuitively and accurately people can interact with the front touchpad. Then, we further experimented various user interfaces such as a binary selection, a typical menu layout, and a keyboard. Two-Finger and Drag-n-Tap were also explored to find the appropriate selection technique. As a low-cost, light-weight, and in low power budget technology, a touch sensor can make an ideal interface for mobile headset. Also, front touch area can be large enough to allow wide range of interaction types such as multi-finger interactions. With this novel front touch interface, we paved a way to new virtual reality interaction methods

INVESTIGATING MIDAIR VIRTUAL KEYBOARD INPUT USING A HEAD MOUNTED DISPLAY

Until recently text entry in virtual reality has been limited to using hand-held controllers. These techniques of text entry are feasible only for entering short texts like usernames and passwords. But recent improvements in virtual reality devices have paved the way to varied interactions in virtual environment and many of these tasks include annotation, text messaging, etc. These tasks require an effective way of text entry in virtual reality. We present an interactive midair text entry system in virtual reality which allows users to use their one or both hands as the means of entering text. Our system also allows users to enter text on a split keyboard using their two hands. We investigated user performance on these three conditions and found that users were slightly faster when they were using both hands. In this case, the mean entry rate was 16.4 words-per-minute (wpm). While using one hand, the entry rate was 16.1 wpm and using the split keyboard the entry rate was 14.7 wpm. The character error rates (CER) in these conditions were 0.74%, 0.79% and 1.41% respectively. We also examined the extent to which a user can enter text without having any visual feedback of a keyboard i.e. on an invisible keyboard in the virtual environment. While some found it difficult, results were promising for a subset of 15 participants of the 22 participants. The subset had a mean entry rate of 10.0 wpm and a mean error rate of 2.98%

Shoulder-Surfing Resistant Authentication for Augmented Reality

Augmented Reality (AR) Head-Mounted Displays (HMD) are increasingly used in industry to digitize processes and enhance user experience by enabling real-time interaction with both physical and virtual objects. In this context, HMD provide access to sensitive data and applications which demand authenticating users before granting access. Furthermore, these devices are often used in shared spaces. Thus, shoulder-surfing attacks need to be addressed. As users can remember pictures more easily than text, we applied the recognition-based graphical password scheme “Things” from previous work on an AR HMD while placing the pictures for each authentication attempt in a random order. We implemented this scheme for the HMD Microsoft HoloLens and conducted a user study evaluating Things\u27s usability. All participants could be successfully authenticated and the System Usability Scale (SUS) score is with 74 categorized as above average. We discuss as future work how to improve the SUS scores, e.g., by using different grid designs and input methods

Force-Aware Interface via Electromyography for Natural VR/AR Interaction

While tremendous advances in visual and auditory realism have been made for virtual and augmented reality (VR/AR), introducing a plausible sense of physicality into the virtual world remains challenging. Closing the gap between real-world physicality and immersive virtual experience requires a closed interaction loop: applying user-exerted physical forces to the virtual environment and generating haptic sensations back to the users. However, existing VR/AR solutions either completely ignore the force inputs from the users or rely on obtrusive sensing devices that compromise user experience. By identifying users' muscle activation patterns while engaging in VR/AR, we design a learning-based neural interface for natural and intuitive force inputs. Specifically, we show that lightweight electromyography sensors, resting non-invasively on users' forearm skin, inform and establish a robust understanding of their complex hand activities. Fuelled by a neural-network-based model, our interface can decode finger-wise forces in real-time with 3.3% mean error, and generalize to new users with little calibration. Through an interactive psychophysical study, we show that human perception of virtual objects' physical properties, such as stiffness, can be significantly enhanced by our interface. We further demonstrate that our interface enables ubiquitous control via finger tapping. Ultimately, we envision our findings to push forward research towards more realistic physicality in future VR/AR.Comment: ACM Transactions on Graphics (SIGGRAPH Asia 2022

Fast and precise touch-based text entry for head-mounted augmented reality with variable occlusion

We present the VISAR keyboard: An augmented reality (AR) head-mounted display (HMD) system that supports text entry via a virtualised input surface. Users select keys on the virtual keyboard by imitating the process of single-hand typing on a physical touchscreen display. Our system uses a statistical decoder to infer users’ intended text and to provide error-tolerant predictions. There is also a high-precision fall-back mechanism to support users in indicating which keys should be unmodified by the auto-correction process. A unique advantage of leveraging the well-established touch input paradigm is that our system enables text entry with minimal visual clutter on the see-through display, thus preserving the user’s field-of-view. We iteratively designed and evaluated our system and show that the final iteration of the system supports a mean entry rate of 17.75wpm with a mean character error rate less than 1%. This performance represents a 19.6% improvement relative to the state-of-the-art baseline investigated: A gaze-then-gesture text entry technique derived from the system keyboard on the Microsoft HoloLens. Finally, we validate that the system is effective in supporting text entry in a fully mobile usage scenario likely to be encountered in industrial applications of AR HMDs.Per Ola Kristensson was supported in part by a Google Faculty research award and EPSRC grants EP/N010558/1 and EP/N014278/1. Keith Vertanen was supported in part by a Google Faculty research award. John Dudley was supported by the Trimble Fund

WearPut : Designing Dexterous Wearable Input based on the Characteristics of Human Finger Motions

Department of Biomedical Engineering (Human Factors Engineering)Powerful microchips for computing and networking allow a wide range of wearable devices to be miniaturized with high fidelity and availability. In particular, the commercially successful smartwatches placed on the wrist drive market growth by sharing the role of smartphones and health management. The emerging Head Mounted Displays (HMDs) for Augmented Reality (AR) and Virtual Reality (VR) also impact various application areas in video games, education, simulation, and productivity tools. However, these powerful wearables have challenges in interaction with the inevitably limited space for input and output due to the specialized form factors for fitting the body parts. To complement the constrained interaction experience, many wearable devices still rely on other large form factor devices (e.g., smartphones or hand-held controllers). Despite their usefulness, the additional devices for interaction can constrain the viability of wearable devices in many usage scenarios by tethering users' hands to the physical devices. This thesis argues that developing novel Human-Computer interaction techniques for the specialized wearable form factors is vital for wearables to be reliable standalone products. This thesis seeks to address the issue of constrained interaction experience with novel interaction techniques by exploring finger motions during input for the specialized form factors of wearable devices. The several characteristics of the finger input motions are promising to enable increases in the expressiveness of input on the physically limited input space of wearable devices. First, the input techniques with fingers are prevalent on many large form factor devices (e.g., touchscreen or physical keyboard) due to fast and accurate performance and high familiarity. Second, many commercial wearable products provide built-in sensors (e.g., touchscreen or hand tracking system) to detect finger motions. This enables the implementation of novel interaction systems without any additional sensors or devices. Third, the specialized form factors of wearable devices can create unique input contexts while the fingers approach their locations, shapes, and components. Finally, the dexterity of fingers with a distinctive appearance, high degrees of freedom, and high sensitivity of joint angle perception have the potential to widen the range of input available with various movement features on the surface and in the air. Accordingly, the general claim of this thesis is that understanding how users move their fingers during input will enable increases in the expressiveness of the interaction techniques we can create for resource-limited wearable devices. This thesis demonstrates the general claim by providing evidence in various wearable scenarios with smartwatches and HMDs. First, this thesis explored the comfort range of static and dynamic touch input with angles on the touchscreen of smartwatches. The results showed the specific comfort ranges on variations in fingers, finger regions, and poses due to the unique input context that the touching hand approaches a small and fixed touchscreen with a limited range of angles. Then, finger region-aware systems that recognize the flat and side of the finger were constructed based on the contact areas on the touchscreen to enhance the expressiveness of angle-based touch input. In the second scenario, this thesis revealed distinctive touch profiles of different fingers caused by the unique input context for the touchscreen of smartwatches. The results led to the implementation of finger identification systems for distinguishing two or three fingers. Two virtual keyboards with 12 and 16 keys showed the feasibility of touch-based finger identification that enables increases in the expressiveness of touch input techniques. In addition, this thesis supports the general claim with a range of wearable scenarios by exploring the finger input motions in the air. In the third scenario, this thesis investigated the motions of in-air finger stroking during unconstrained in-air typing for HMDs. The results of the observation study revealed details of in-air finger motions during fast sequential input, such as strategies, kinematics, correlated movements, inter-fingerstroke relationship, and individual in-air keys. The in-depth analysis led to a practical guideline for developing robust in-air typing systems with finger stroking. Lastly, this thesis examined the viable locations of in-air thumb touch input to the virtual targets above the palm. It was confirmed that fast and accurate sequential thumb touch can be achieved at a total of 8 key locations with the built-in hand tracking system in a commercial HMD. Final typing studies with a novel in-air thumb typing system verified increases in the expressiveness of virtual target selection on HMDs. This thesis argues that the objective and subjective results and novel interaction techniques in various wearable scenarios support the general claim that understanding how users move their fingers during input will enable increases in the expressiveness of the interaction techniques we can create for resource-limited wearable devices. Finally, this thesis concludes with thesis contributions, design considerations, and the scope of future research works, for future researchers and developers to implement robust finger-based interaction systems on various types of wearable devices.ope

Freeform User Interfaces for Graphical Computing

報告番号: 甲15222 ; 学位授与年月日: 2000-03-29 ; 学位の種別: 課程博士 ; 学位の種類: 博士(工学) ; 学位記番号: 博工第4717号 ; 研究科・専攻: 工学系研究科情報工学専

Understanding Mode and Modality Transfer in Unistroke Gesture Input

Unistroke gestures are an attractive input method with an extensive research history, but one challenge with their usage is that the gestures are not always self-revealing. To obtain expertise with these gestures, interaction designers often deploy a guided novice mode -- where users can rely on recognizing visual UI elements to perform a gestural command. Once a user knows the gesture and associated command, they can perform it without guidance; thus, relying on recall. The primary aim of my thesis is to obtain a comprehensive understanding of why, when, and how users transfer from guided modes or modalities to potentially more efficient, or novel, methods of interaction -- through symbolic-abstract unistroke gestures. The goal of my work is to not only study user behaviour from novice to more efficient interaction mechanisms, but also to expand upon the concept of intermodal transfer to different contexts. We garner this understanding by empirically evaluating three different use cases of mode and/or modality transitions. Leveraging marking menus, the first piece investigates whether or not designers should force expertise transfer by penalizing use of the guided mode, in an effort to encourage use of the recall mode. Second, we investigate how well users can transfer skills between modalities, particularly when it is impractical to present guidance in the target or recall modality. Lastly, we assess how well users' pre-existing spatial knowledge of an input method (the QWERTY keyboard layout), transfers to performance in a new modality. Applying lessons from these three assessments, we segment intermodal transfer into three possible characterizations -- beyond the traditional novice to expert contextualization. This is followed by a series of implications and potential areas of future exploration spawning from our work

TouchEditor: Interaction design and evaluation of a flexible touchpad for text editing of head-mounted displays in speech-unfriendly environments

A text editing solution that adapts to speech-unfriendly (inconvenient to speak or difficult to recognize speech) environments is essential for head-mounted displays (HMDs) to work universally. For existing schemes, e.g., touch bar, virtual keyboard and physical keyboard, there are shortcomings such as insufficient speed, uncomfortable experience or restrictions on user location and posture. To mitigate these restrictions, we propose TouchEditor, a novel text editing system for HMDs based on a flexible piezoresistive film sensor, supporting cursor positioning, text selection, text retyping and editing commands (i.e., Copy, Paste, Delete, etc.). Through literature overview and heuristic study, we design a pressure-controlled menu and a shortcut gesture set for entering editing commands, and propose an area-and-pressure-based method for cursor positioning and text selection that skillfully maps gestures in different areas and with different strengths to cursor movements with different directions and granularities. The evaluation results show that TouchEditor i) adapts to various contents and scenes well with a stable correction speed of 0.075 corrections per second; ii) achieves 95.4% gesture recognition accuracy; iii) reaches a considerable level with a mobile phone in text selection tasks. The comparison results with the speech-dependent EYEditor and the built-in touch bar further prove the flexibility and robustness of TouchEditor in speech-unfriendly environments