Multipair Massive MIMO Relaying Systems with One-Bit ADCs and DACs

This paper considers a multipair amplify-and-forward massive MIMO relaying system with one-bit ADCs and one-bit DACs at the relay. The channel state information is estimated via pilot training, and then utilized by the relay to perform simple maximum-ratio combining/maximum-ratio transmission processing. Leveraging on the Bussgang decomposition, an exact achievable rate is derived for the system with correlated quantization noise. Based on this, a closed-form asymptotic approximation for the achievable rate is presented, thereby enabling efficient evaluation of the impact of key parameters on the system performance. Furthermore, power scaling laws are characterized to study the potential energy efficiency associated with deploying massive one-bit antenna arrays at the relay. In addition, a power allocation strategy is designed to compensate for the rate degradation caused by the coarse quantization. Our results suggest that the quality of the channel estimates depends on the specific orthogonal pilot sequences that are used, contrary to unquantized systems where any set of orthogonal pilot sequences gives the same result. Moreover, the sum rate gap between the double-quantized relay system and an ideal non-quantized system is a moderate factor of $4/\pi^2$ in the low power regime.Comment: 14 pages, 10 figures, submitted to IEEE Trans. Signal Processin

Resource allocation and optimization techniques in wireless relay networks

Relay techniques have the potential to enhance capacity and coverage of a wireless network. Due to rapidly increasing number of smart phone subscribers and high demand for data intensive multimedia applications, the useful radio spectrum is becoming a scarce resource. For this reason, two way relay network and cognitive radio technologies are required for better utilization of radio spectrum. Compared to the conventional one way relay network, both the uplink and the downlink can be served simultaneously using a two way relay network. Hence the effective bandwidth efficiency is considered to be one time slot per transmission. Cognitive networks are wireless networks that consist of different types of users, a primary user (PU, the primary license holder of a spectrum band) and secondary users (SU, cognitive radios that opportunistically access the PU spectrum). The secondary users can access the spectrum of the licensed user provided they do not harmfully affect to the primary user. In this thesis, various resource allocation and optimization techniques have been investigated for wireless relay and cognitive radio networks

Mathematical optimization and signal processing techniques for cooperative wireless networks

The rapid growth of mobile users and emergence of high data rate multimedia and interactive services have resulted in a shortage of the radio spectrum. Novel solutions are therefore required for future generations of wireless networks to enhance capacity and coverage. This thesis aims at addressing this issue through the design and analysis of signal processing algorithms. In particular various resource allocation and spatial diversity techniques have been proposed within the context of wireless peer-to-peer relays and coordinated base station (BS) processing. In order to enhance coverage while providing improvement in capacity, peer-to-peer relays that share the same frequency band have been considered and various techniques for designing relay coefficients and allocating powers optimally are proposed. Both one-way and two-way amplify and forward (AF) relays have been investigated. In order to maintain fairness, a signal-to-interference plus noise ratio (SINR) balancing criterion has been adopted. In order to improve the spectrum utilization further, the relays within the context of cognitive radio network are also considered. In this case, a cognitive peer-to-peer relay network is required to achieve SINR balancing while maintaining the interference leakage to primary receiver below a certain threshold. As the spatial diversity techniques in the form of multiple-input-multipleoutput (MIMO) systems have the potential to enhance capacity significantly, the above work has been extended to peer-to-peer MIMO relay networks. Transceiver and relay beamforming design based on minimum mean-square error (MSE) criterion has been proposed. Establishing uplink downlink MSE duality, an alternating algorithm has been developed. A scenario where multiple users are served by both the BS and a MIMO relay is considered and a joint beamforming technique for the BS and the MIMO relay is proposed. With the motivation of optimising the transmission power at both the BS and the relay, an interference precoding design is presented that takes into account the knowledge of the interference caused by the relay to the users served by the BS. Recognizing joint beamformer design for multiple BSs has the ability to reduce interference in the network significantly, cooperative multi-cell beamforming design is proposed. The aim is to design multi-cell beamformers to maximize the minimum SINR of users subject to individual BS power constraints. In contrast to all works available in the literature that aimed at balancing SINR of all users in all cells to the same level, the SINRs of users in each cell is balanced and maximized at different values. This new technique takes advantage of the fact that BSs may have different available transmission powers and/or channel conditions for their users

A Modified Levenberg-Marquardt Method for the Bidirectional Relay Channel

This paper presents an optimization approach for a system consisting of multiple bidirectional links over a two-way amplify-and-forward relay. It is desired to improve the fairness of the system. All user pairs exchange information over one relay station with multiple antennas. Due to the joint transmission to all users, the users are subject to mutual interference. A mitigation of the interference can be achieved by max-min fair precoding optimization where the relay is subject to a sum power constraint. The resulting optimization problem is non-convex. This paper proposes a novel iterative and low complexity approach based on a modified Levenberg-Marquardt method to find near optimal solutions. The presented method finds solutions close to the standard convex-solver based relaxation approach.Comment: submitted to IEEE Transactions on Vehicular Technology We corrected small mistakes in the proof of Lemma 2 and Proposition

Wireless transmission protocols using relays for broadcast and information exchange channels

Relays have been used to overcome existing network performance bottlenecks in meeting the growing demand for large bandwidth and high quality of service (QoS) in wireless networks. This thesis proposes several wireless transmission protocols using relays in practical multi-user broadcast and information exchange channels. The main theme is to demonstrate that efficient use of relays provides an additional dimension to improve reliability, throughput, power efficiency and secrecy. First, a spectrally efficient cooperative transmission protocol is proposed for the multiple-input and singleoutput (MISO) broadcast channel to improve the reliability of wireless transmission. The proposed protocol mitigates co-channel interference and provides another dimension to improve the diversity gain. Analytical and simulation results show that outage probability and the diversity and multiplexing tradeoff of the proposed cooperative protocol outperforms the non-cooperative scheme. Second, a two-way relaying protocol is proposed for the multi-pair, two-way relaying channel to improve the throughput and reliability. The proposed protocol enables both the users and the relay to participate in interference cancellation. Several beamforming schemes are proposed for the multi-antenna relay. Analytical and simulation results reveal that the proposed protocol delivers significant improvements in ergodic capacity, outage probability and the diversity and multiplexing tradeoff if compared to existing schemes. Third, a joint beamforming and power management scheme is proposed for multiple-input and multiple-output (MIMO) two-way relaying channel to improve the sum-rate. Network power allocation and power control optimisation problems are formulated and solved using convex optimisation techniques. Simulation results verify that the proposed scheme delivers better sum-rate or consumes lower power when compared to existing schemes. Fourth, two-way secrecy schemes which combine one-time pad and wiretap coding are proposed for the scalar broadcast channel to improve secrecy rate. The proposed schemes utilise the channel reciprocity and employ relays to forward secret messages. Analytical and simulation results reveal that the proposed schemes are able to achieve positive secrecy rates even when the number of users is large. All of these new wireless transmission protocols help to realise better throughput, reliability, power efficiency and secrecy for wireless broadcast and information exchange channels through the efficient use of relays

Optimal Power Allocation for Energy Efficient MIMO Relay Systems in 5G Wireless Communication

Wireless communication has undergone a significant growth to meet the unexpected demand of wireless data traffic over the past two decades. As manifested by the revolution of the third and fourth generations and long-term evolution advanced (LTE-A), engineers and researchers have been devoted to the development of the next-generation (5G) wireless solutions to meet the anticipated demand of 2020. To this end, cooperative relay communication has been introduced as an enabling technology to increase the throughput and extend the coverage of the broadband wireless networks. Decode-and-forward (DF) has been known as an effective cooperative relaying strategy for its outstanding features. On the other hand, merging massive multi-input-multi-output (MIMO) with cooperative DF relay is considered as a key technology for 5G wireless networks to improve the quality-of-service (QoS) in a cost-effective manner. The objective of this thesis is to establish and solve a power allocation optimization problem for energy efficient multi-pair DF relay systems integrated with massive MIMO. The first part of the thesis is focused on a constrained optimization problem to minimize the total transmit power for each transmission phase of the DF relay. Due to the non-convexity characteristic, the objective function is approximated as a convex function by means of complementary geometric programming (CGP) which is then solved by a sequence of geometric programming (GP). A lower bound of average SINR is also introduced by adopting the MMSE channel state information (CSI) to relax the constraint functions in the standard GP form. Finally, we proposed a homotopy or continuation method based algorithm to solve the optimization problem via popular CVX optimization toolbox. MATLAB simulations are conducted to validate the proposed algorithm. In the second part, another optimization problem is presented for the entire two-hop transmission of the DF relay to improve the global energy efficiency (GEE) under different channel conditions. Here, we estimate the channel by maximum likelihood (ML) criterion and investigate a closed-form expression of GEE. Further, GEE is approximated in a convex form by applying CGP due to the difficulty arising from the non-convexity and a lower bound of the average SINR expression is also derived to relax the constraint functions in the GP problem. Numerical results showing a detailed comparison of GEE under ML and MMSE channel estimation conditions and the performance improvement from the proposed algorithm are provided

Interference reduction in multiuser relay networks

In future multiuser wireless systems, the limited system resources have to be extensively reused for serving several users. This results in received interferences at the users which limit the performance of the system. A scenario with several source-destination node pairs communicating unidirectionally through a shared medium is considered. The communication among the nodes is assisted by some relays and takes place in two time slots. The present dissertation focuses on investigating how the relay and the filter coefficients can be smartly adjusted such that the system performance is enhanced.In zukünftigen Mehrbenutzerfunksystemen müssen die begrenzten Systemressourcen intensiv wiederverwendet werden. Dadurch empfangen die Benutzer Interferenzsignale, sodass die Performanz des Funksystems begrenzt wird. Es wird ein Szenario, bestehend aus mehreren Paaren von Quell- und Zielknoten, betrachtet. Die Knotenpaare kommunizieren unidirektional miteinander durch ein Relay. Diese Dissertation konzentriert sich auf die Untersuchung, wie die Relay- und die Filterkoeffizienten intelligent angepasst werden können, sodass die Performanz des Funksystems erhöht wird