Linearity improvement of VCSELs based radio over fiber systems utilizing digital predistortion

The article proposes a Digital Predistortion (DPD) methodology that substantially meliorates the linearity of limited range Mobile Front Haul links for the extant Long-Term Evolution (LTE) and future (5G) networks. Specifically, the DPD is employed to Radio over Fiber links that contrive of Vertical Cavity Surface Emitting Lasers (VCSELs) working at 850 nm. Both, Memory and Generalized Memory Polynomial models are implied to Single Mode (SM) and Multi-Mode (MM) VCSELs respectively. The effectiveness of the proposed DPD methodology is analyzed in terms of Normalized Mean Square Error, Normalized Magnitude, Normalized phase and Adjacent Channel Power Ratio. The demonstration has been carried out with a complete (Long Term Evolution) LTE frame of 10 ms having 5 MHz bandwidth with 64-QAM modulation configuration. Additionally, the effectuality of the proposed DPD technique is evaluated for varying levels of input power and link lengths. The experimental outcomes signify the novel capability of the implied DPD methodology for different link lengths to achieve higher system linearization

Radio-over-fiber linearization with optimized genetic algorithm CPWL model

This article proposes an optimized version of a canonical piece-wise-linear (CPWL) digital predistorter in order to enhance the linearity of a radio-over-fiber (RoF) LTE mobile fronthaul. In this work, we propose a threshold allocation optimization process carried out by a genetic algorithm (GA) in order to optimize the CPWL model (GA-CPWL). Firstly, experiments show how the CPWL model outperforms the classical memory polynomial DPD in an intensity modulation/direct detection (IM/DD) RoF link. Then, the GA-CPWL predistorter is compared with the CPWL model in several scenarios, in order to verify that the proposed DPD offers better performance in different optical transmission conditions. Experimental results reveal that with a proper threshold allocation, the GA-CPWL predistorter offers very promising outcomes

Digital Signal Processing Techniques Applied to Radio over Fiber Systems

The dissertation aims to analyze different Radio over Fiber systems for the front-haul applications. Particularly, analog radio over fiber (A-RoF) are simplest and suffer from nonlinearities, therefore, mitigating such nonlinearities through digital predistortion are studied. In particular for the long haul A-RoF links, direct digital predistortion technique (DPDT) is proposed which can be applied to reduce the impairments of A-RoF systems due to the combined effects of frequency chirp of the laser source and chromatic dispersion of the optical channel. Then, indirect learning architecture (ILA) based structures namely memory polynomial (MP), generalized memory polynomial (GMP) and decomposed vector rotation (DVR) models are employed to perform adaptive digital predistortion with low complexities. Distributed feedback (DFB) laser and vertical capacity surface emitting lasers (VCSELs) in combination with single mode/multi-mode fibers have been linearized with different quadrature amplitude modulation (QAM) formats for single and multichannel cases. Finally, a feedback adaptive DPD compensation is proposed. Then, there is still a possibility to exploit the other realizations of RoF namely digital radio over fiber (D-RoF) system where signal is digitized and transmits the digitized bit streams via digital optical communication links. The proposed solution is robust and immune to nonlinearities up-to 70 km of link length. Lastly, in light of disadvantages coming from A-RoF and D-RoF, it is still possible to take only the advantages from both methods and implement a more recent form knows as Sigma Delta Radio over Fiber (S-DRoF) system. Second Order Sigma Delta Modulator and Multi-stAge-noise-SHaping (MASH) based Sigma Delta Modulator are proposed. The workbench has been evaluated for 20 MHz LTE signal with 256 QAM modulation. Finally, The 6x2 GSa/s sigma delta modulators are realized on FPGA to show a real time demonstration of S-DRoF system. The demonstration shows that S-DRoF is a competitive competitor for 5G sub-6GHz band applications

Multi look-up table FPGA implementation of an adaptive digital predistorter for linearizing RF power amplifiers with memory effects

This paper presents a hardware implementation of a digital predistorter (DPD) for linearizing RF power amplifiers (PAs) for wideband applications. The proposed predistortion linearizer is based on a nonlinear auto-regressive moving average (NARMA) structure, which can be derived from the NARMA PA behavioral model and then mapped into a set of scalable lookup tables (LUTs). The linearizer takes advantage of its recursive nature to relax the LUT count needed to compensate memory effects in PAs. Experimental support is provided by the implementation of the proposed NARMA DPD in a field-programmable gate-array device to linearize a 170-W peak power PA, validating the recursive DPD NARMA structure for W-CDMA signals and flexible transmission bandwidth scenarios. To the best of the authors’ knowledge, it is the first time that a recursive structure is experimentally validated for DPD purposes. In addition to the results on PA efficiency and linearity, this paper addresses many practical implementation issues related to the use of FPGA in DPD applications, giving an original insight on actual prototyping scenarios. Finally, this study discusses the possibility of further enhancing the overall efficiency by degrading the PA operation mode, provided that DPD may be unavoidable due to the impact of memory effects.Peer Reviewe

Multi Look-Up Table Digital Predistortion for RF Power Amplifier Linearization

Premi extraordinari doctorat curs 2007-2008, àmbit d’Enginyeria de les TICAquesta Tesi Doctoral se centra en el disseny d'un nou linealitzador de Predistorsió Digital (Digital Predistortion - DPD) capaç de compensar la dinàmica i els efectes no lineals introduïts pels Amplificadors de Potència (Power Amplifiers - PAs). Un dels trets més rellevants d'aquest nou predistorsionador digital i adaptatiu consisteix en ser deduïble a partir d'un model de PA anomenat Nonlinear Auto-Regressive Moving Average (NARMA). A més, la seva arquitectura multi-LUT (multi-Taula) permet la implementació en un dispositiu Field Programmable Gate Array (FPGA).La funció de predistorsió es realitza en banda base, per tant, és independent de la banda freqüencial on es durà a terme l'amplificació del senyal de RF, el que pot resultar útil si tenim en compte escenaris multibanda o reconfigurables. D'altra banda, el fet que aquest DPD tingui en compte els efectes de memòria introduïts pel PA, representa una clara millora de les prestacions aconseguides per un simple DPD sense memòria. En comparació amb d'altres DPDs basats en models més computacionalment complexos, com és el cas de les xarxes neuronals amb memòria (Time-Delayed Neural Networks - TDNN), la estructura recursiva del DPD proposat permet reduir el nombre de LUTs necessàries per compensar els efectes de memòria del PA. A més, la seva estructura multi-LUT permet l'escalabilitat, és a dir, activar or desactivar les LUTs que formen el DPD en funció de la dinàmica que presenti el PA.En una primera aproximació al disseny del DPD, és necessari identificar el model NARMA del PA. Un dels majors avantatges que presenta el model NARMA és la seva capacitat per trobar un compromís entre la fidelitat en l'estimació del PA i la complexitat computacional introduïda. Per reforçar aquest compromís, l' ús d'algoritmes heurístics de cerca, com són el Simulated Annealing o els Genetic Algorithms, s'utilitzen per trobar els retards que millor caracteritzen la memòria del PA i per tant, permeten la reducció del nombre de coeficients necessaris per caracteritzar-la. Tot i així, la naturalesa recursiva del model NARMA comporta que, de cara a garantir l'estabilitat final del DPD, cal dur a terme un estudi previ sobre l'estabilitat del model.Una vegada s'ha obtingut el model NARMA del PA i s'ha verificat l'estabilitat d'aquest, es procedeix a l'obtenció de la funció de predistorsió a través del mètode d'identificació predictiu. Aquest mètode es basa en la continua identificació del model NARMA del PA i posteriorment, a partir del model obtingut, es força al PA perquè es comporti de manera lineal. Per poder implementar la funció de predistorsió en la FPGA, cal primer expressar-la en forma de combinacions en paral·lel i cascada de les anomenades Cel·les Bàsiques de Predistorsió (BPCs), que són les unitats fonamentals que composen el DPD. Una BPC està formada per un multiplicador complex, un port RAM dual que actua com a LUT (taula de registres) i un calculador d'adreces. Les LUTs s'omplen tenint en compte una distribució uniforme dels continguts i l'indexat d'aquestes es duu a terme mitjançant el mòdul de l'envoltant del senyal. Finalment, l'adaptació del DPD consisteix en monitoritzar els senyals d'entrada i sortida del PA i anar duent a terme actualitzacions periòdiques del contingut de les LUTs que formen les BPCs. El procés d'adaptació del contingut de les LUTs es pot dur a terme en la mateixa FPGA encarregada de fer la funció de predistorsió, o de manera alternativa, pot ser duta a terme per un dispositiu extern (com per exemple un DSP - Digital Signal Processor) en una escala de temps més relaxada. Per validar l'exposició teòrica i provar el bon funcionalment del DPD proposat en aquesta Tesi, es proporcionen resultats tant de simulació com experimentals que reflecteixen els objectius assolits en la linealització del PA. A més, certes qüestions derivades de la implementació pràctica, tals com el consum de potència o la eficiència del PA, són també tractades amb detall.This Ph.D. thesis addresses the design of a new Digital Predistortion (DPD) linearizer capable to compensate the unwanted nonlinear and dynamic behavior of power amplifiers (PAs). The distinctive characteristic of this new adaptive DPD is its deduction from a Nonlinear Auto Regressive Moving Average (NARMA) PA behavioral model and its particular multi look-up table (LUT) architecture that allows its implementation in a Field Programmable Gate Array (FPGA) device.The DPD linearizer presented in this thesis operates at baseband, thus becoming independent on the final RF frequency band and making it suitable for multiband or reconfigurable scenarios. Moreover, the proposed DPD takes into account PA memory effects compensation which representsan step forward in overcoming classical limitations of memoryless predistorters. Compared to more computational complex DPDs with dynamic compensation, such Time-Delayed Neural Networks (TDNN), this new DPD takes advantage of the recursive nature of the NARMA structure to relax the number of LUTs required to compensate memory effects in PAs. Furthermore, its parallel multi-LUT architecture is scalable, that is, permits enabling or disabling the contribution of specific LUTs depending on the dynamics presented by a particular PA.In a first approach, it is necessary to identify a NARMA PA behavioral model. The extraction of PA behavioral models for DPD linearization purposes is carried out by means of input and output complex envelope signal observations. One of the major advantages of the NARMA structure regards its capacity to deal with the existing trade-off between computational complexity and accuracy in PA behavioral modeling. To reinforce this compromise, heuristic search algorithms such the Simulated Annealing or Genetic Algorithms are utilized to find the best sparse delays that permit accurately reproducing the PA nonlinear dynamic behavior. However, due to the recursive nature of the NARMA model, an stability test becomes a previous requisite before advancing towards DPD linearization.Once the PA model is identified and its stability verified, the DPD function is extracted applying a predictive predistortion method. This identification method relies just on the PA NARMA model and consists in adaptively forcing the PA to behave as a linear device. Focusing in the DPD implementation, it is possible to map the predistortion function in a FPGA, but to fulfill this objective it is first necessary to express the predistortion function as a combined set of LUTs.In order to store the DPD function into a FPGA, it has to be stated in terms of parallel and cascade Basic Predistortion Cells (BPCs), which are the fundamental building blocks of the NARMA based DPD. A BPC is formed by a complex multiplier, a dual port RAM memory block acting as LUT and an address calculator. The LUT contents are filled following an uniform spacing procedure and its indexing is performed with the amplitude (modulus) of the signal's envelope.Finally, the DPD adaptation consists in monitoring the input-output data and performing frequent updates of the LUT contents that conform the BPCs. This adaptation process can be carried out in the same FPGA in charge of performing the DPD function, or alternatively can be performed by an external device (i.e. a DSP device) in a different time-scale than real-time operation.To support all the theoretical design and to prove the linearization performance achieved by this new DPD, simulation and experimental results are provided. Moreover, some issues derived from practical experimentation, such as power consumption and efficiency, are also reported and discussed within this thesis.Award-winningPostprint (published version

Automatic transmit power control for power efficient communications in UAS

Nowadays, unmanned aerial vehicles (UAV) have become one of the most popular tools that can be used in commercial, scientific, agricultural and military applications. As drones become faster, smaller and cheaper, with the ability to add payloads, the usage of the drone can be versatile. In most of the cases, unmanned aerials systems (UAS) are equipped with a wireless communication system to establish a link with the ground control station to transfer the control commands, video stream, and payload data. However, with the limited onboard calculation resources in the UAS, and the growing size and volume of the payload data, computational complex signal processing such as deep learning cannot be easily done on the drone. Hence, in many drone applications, the UAS is just a tool for capturing and storing data, and then the data is post-processed off-line in a more powerful computing device. The other solution is to stream payload data to the ground control station (GCS) and let the powerful computer on the ground station to handle these data in real-time. With the development of communication techniques such as orthogonal frequency-division multiplexing (OFDM) and multiple-input multiple-output (MIMO) transmissions, it is possible to increase the spectral efficiency over large bandwidths and consequently achieve high transmission rates. However, the drone and the communication system are usually being designed separately, which means that regardless of the situation of the drone, the communication system is working independently to provide the data link. Consequently, by taking into account the position of the drone, the communication system has some room to optimize the link budget efficiency. In this master thesis, a power-efficient wireless communication downlink for UAS has been designed. It is achieved by developing an automatic transmit power control system and a custom OFDM communication system. The work has been divided into three parts: research of the drone communication system, an optimized communication system design and finally, FPGA implementation. In the first part, an overview on commercial drone communication schemes is presented and discussed. The advantages and disadvantages shown are the source of inspiration for improvement. With these ideas, an optimized scheme is presented. In the second part, an automatic transmit power control system for UAV wireless communication and a power-efficient OFDM downlink scheme are proposed. The automatic transmit power control system can estimate the required power level by the relative position between the drone and the GCS and then inform the system to adjust the power amplifier (PA) gain and power supply settings. To obtain high power efficiency for different output power levels, a searching strategy has been applied to the PA testbed to find out the best voltage supply and gain configurations. Besides, the OFDM signal generation developed in Python can encode data bytes to the baseband signal for testing purpose. Digital predistortion (DPD) linearization has been included in the transmitter’s design to guarantee the signal linearity. In the third part, two core algorithms: IFFT and LUT-based DPD, have been implemented in the FPGA platform to meet the real-time and high-speed I/O requirements. By using the high-level synthesis design process provided by Xilinx Corp, the algorithms are implemented as reusable IP blocks. The conclusion of the project is given in the end, including the summary of the proposed drone communication system and envisioning possible future lines of research

A fast engineering approach to high efficiency power amplifier linearization for avionics applications

This PhD thesis provides a fast engineering approach to the design of digital predistortion (DPD) linearizers from several perspectives: i) enhancing the off-line training performance of open-loop DPD, ii) providing robustness and reducing the computational complexity of the parameters identification subsystem and, iii) importing machine learning techniques to favor the automatic tuning of power amplifiers (PAs) and DPD linearizers with several free-parameters to maximize power efficiency while meeting the linearity specifications. One of the essential parts of unmanned aerial vehicles (UAV) is the avionics, being the radio control one of the earliest avionics present in the UAV. Unlike the control signal, for transferring user data (such as images, video, etc.) real-time from the drone to the ground station, large transmission rates are required. The PA is a key element in the transmitter chain to guarantee the data transmission (video, photo, etc.) over a long range from the ground station. The more linear output power, the better the coverage or alternatively, with the same coverage, better SNR allows the use of high-order modulation schemes and thus higher transmission rates are achieved. In the context of UAV wireless communications, the power consumption, size and weight of the payload is of significant importance. Therefore, the PA design has to take into account the compromise among bandwidth, output power, linearity and power efficiency (very critical in battery-supplied devices). The PA can be designed to maximize its power efficiency or its linearity, but not both. Therefore, a way to deal with this inherent trade-off is to design high efficient amplification topologies and let the PA linearizers take care of the linearity requirements. Among the linearizers, DPD linearization is the preferred solution to both academia and industry, for its high flexibility and linearization performance. In order to save as many computational and power resources as possible, the implementation of an open-loop DPD results a very attractive solution for UAV applications. This thesis contributes to the PA linearization, especially on off-line training for open-loop DPD, by presenting two different methods for reducing the design and operating costs of an open-loop DPD, based on the analysis of the DPD function. The first method focuses on the input domain analysis, proposing mesh-selecting (MeS) methods to accurately select the proper samples for a computationally efficient DPD parameter estimation. Focusing in the MeS method with better performance, the memory I-Q MeS method is combined with feature extraction dimensionality reduction technique to allow a computational complexity reduction in the identification subsystem by a factor of 65, in comparison to using the classical QR-LS solver and consecutive samples selection. In addition, the memory I-Q MeS method has been proved to be of crucial interest when training artificial neural networks (ANN) for DPD purposes, by significantly reducing the ANN training time. The second method involves the use of machine learning techniques in the DPD design procedure to enlarge the capacity of the DPD algorithm when considering a high number of free parameters to tune. On the one hand, the adaLIPO global optimization algorithm is used to find the best parameter configuration of a generalized memory polynomial behavioral model for DPD. On the other hand, a methodology to conduct a global optimization search is proposed to find the optimum values of a set of key circuit and system level parameters, that properly combined with DPD linearization and crest factor reduction techniques, can exploit at best dual-input PAs in terms of maximizing power efficiency along wide bandwidths while being compliant with the linearity specifications. The advantages of these proposed techniques have been validated through experimental tests and the obtained results are analyzed and discussed along this thesis.Aquesta tesi doctoral proporciona unes pautes per al disseny de linealitzadors basats en predistorsió digital (DPD) des de diverses perspectives: i) millorar el rendiment del DPD en llaç obert, ii) proporcionar robustesa i reduir la complexitat computacional del subsistema d'identificació de paràmetres i, iii) incorporació de tècniques d'aprenentatge automàtic per afavorir l'auto-ajustament d'amplificadors de potència (PAs) i linealitzadors DPD amb diversos graus de llibertat per poder maximitzar l’eficiència energètica i al mateix temps acomplir amb les especificacions de linealitat. Una de les parts essencials dels vehicles aeris no tripulats (UAV) _es l’aviònica, sent el radiocontrol un dels primers sistemes presents als UAV. Per transferir dades d'usuari (com ara imatges, vídeo, etc.) en temps real des del dron a l’estació terrestre, es requereixen taxes de transmissió grans. El PA _es un element clau de la cadena del transmissor per poder garantir la transmissió de dades a grans distàncies de l’estació terrestre. A major potència de sortida, més cobertura o, alternativament, amb la mateixa cobertura, millor relació senyal-soroll (SNR) la qual cosa permet l’ús d'esquemes de modulació d'ordres superiors i, per tant, aconseguir velocitats de transmissió més altes. En el context de les comunicacions sense fils en UAVs, el consum de potència, la mida i el pes de la càrrega útil són de vital importància. Per tant, el disseny del PA ha de tenir en compte el compromís entre ample de banda, potència de sortida, linealitat i eficiència energètica (molt crític en dispositius alimentats amb bateries). El PA es pot dissenyar per maximitzar la seva eficiència energètica o la seva linealitat, però no totes dues. Per tant, per afrontar aquest compromís s'utilitzen topologies amplificadores d'alta eficiència i es deixa que el linealitzador s'encarregui de garantir els nivells necessaris de linealitat. Entre els linealitzadors, la linealització DPD és la solució preferida tant per al món acadèmic com per a la indústria, per la seva alta flexibilitat i rendiment. Per tal d'estalviar tant recursos computacionals com consum de potència, la implementació d'un DPD en lla_c obert resulta una solució molt atractiva per a les aplicacions UAV. Aquesta tesi contribueix a la linealització del PA, especialment a l'entrenament fora de línia de linealitzadors DPD en llaç obert, presentant dos mètodes diferents per reduir el cost computacional i augmentar la fiabilitat dels DPDs en llaç obert. El primer mètode se centra en l’anàlisi de l’estadística del senyal d'entrada, proposant mètodes de selecció de malla (MeS) per seleccionar les mostres més significatives per a una estimació computacionalment eficient dels paràmetres del DPD. El mètode proposat IQ MeS amb memòria es pot combinar amb tècniques de reducció del model del DPD i d'aquesta manera poder aconseguir una reducció de la complexitat computacional en el subsistema d’identificació per un factor de 65, en comparació amb l’ús de l'algoritme clàssic QR-LS i selecció de mostres d'entrenament consecutives. El segon mètode consisteix en l’ús de tècniques d'aprenentatge automàtic pel disseny del DPD quan es considera un gran nombre de graus de llibertat (paràmetres) per sintonitzar. D'una banda, l'algorisme d’optimització global adaLIPO s'utilitza per trobar la millor configuració de paràmetres d'un model polinomial amb memòria generalitzat per a DPD. D'altra banda, es proposa una estratègia per l’optimització global d'un conjunt de paràmetres clau per al disseny a nivell de circuit i sistema, que combinats amb linealització DPD i les tècniques de reducció del factor de cresta, poden maximitzar l’eficiència de PAs d'entrada dual de gran ample de banda, alhora que compleixen les especificacions de linealitat. Els avantatges d'aquestes tècniques proposades s'han validat mitjançant proves experimentals i els resultats obtinguts s'analitzen i es discuteixen al llarg d'aquesta tesi

Design and Linearization of Energy Efficiency Power Amplifier in Nonlinear OFDM Transmitter for LTE-5G Applications. Simulation and measurements of energy efficiency power amplifier in the presence of nonlinear OFDM transmitter system and digital predistortion based on Hammerstein-Wiener method

This research work has made an effort to understand a novel line of radio frequency power amplifiers (RFPAs) that address initiatives for efficiency enhancement and linearity compensation to harmonize the fifth generation (5G) campaign. The objective is to enhance the performance of an orthogonal frequency division multiplexing-long term evolution (OFDM-LTE) transmitter by reducing the nonlinear distortion of the RFPA. The first part of this work explores the design and implementation of 15.5 W class AB RF power amplifier, adopting a balanced technique to stimulate efficiency enhancement and redeeming exhibition of excessive power in the transmitter. Consequently, this work goes beyond improving efficiency over a linear RF power amplifier design; in which a comprehensive investigation on the fundamental and harmonic components of class F RF power amplifier using a load-pull approach to realise an optimum load impedance and the matching network is presented. The frequency bandwidth for both amplifiers was allocated to operate in the 2.620-2.690 GHz of mobile LTE applications. The second part explores the development of the behavioural model for the class AB power amplifier. A particular novel, Hammerstein-Wiener based model is proposed to describe the dynamic nonlinear behaviour of the power amplifier. The RF power amplifier nonlinear distortion is approximated using a new linear parameter approximation approach. The first and second-order Hammerstein-Wiener using the Normalised Least Mean Square Error (NLMSE) algorithm is used with the aim of easing the complexity of filtering process during linear memory cancellation. Moreover, an enhanced adaptive Wiener model is proposed to explore the nonlinear memory effect in the system. The proposed approach is able to balance between convergence speed and high-level accuracy when compared with behavioural modelling algorithms that are more complex in computation. Finally, the adaptive predistorter technique is implemented and verified in the OFDM transceiver test-bed. The results were compared against the computed one from MATLAB simulation for OFDM and 5G modulation transmitters. The results have confirmed the reliability of the model and the effectiveness of the proposed predistorter.Fundacão para a Ciência e a Tecnologia, Portugal, under European Union’s Horizon 2020 research and innovation programme ... grant agreement H2020-MSCA-ITN- 2016 SECRET-722424 I also acknowledge the role of the National Space Research and Development Agency (NASRDA) Sokoto State Government Petroleum Technology Trust Fund (PTDF

Linear Operation of Switch-Mode Outphasing Power Amplifiers

Radio transceivers are playing an increasingly important role in modern society. The ”connected” lifestyle has been enabled by modern wireless communications. The demand that has been placed on current wireless and cellular infrastructure requires increased spectral efficiency however this has come at the cost of power efficiency. This work investigates methods of improving wireless transceiver efficiency by enabling more efficient power amplifier architectures, specifically examining the role of switch-mode power amplifiers in macro cell scenarios. Our research focuses on the mechanisms within outphasing power amplifiers which prevent linear amplification. From the analysis it was clear that high power non-linear effects are correctable with currently available techniques however non-linear effects around the zero crossing point are not. As a result signal processing techniques for suppressing and avoiding non-linear operation in low power regions are explored. A novel method of digital pre-distortion is presented, and conventional techniques for linearisation are adapted for the particular needs of the outphasing power amplifier. More unconventional signal processing techniques are presented to aid linearisation of the outphasing power amplifier, both zero crossing and bandwidth expansion reduction methods are designed to avoid operation in nonlinear regions of the amplifiers. In combination with digital pre-distortion the techniques will improve linearisation efforts on outphasing systems with dynamic range and bandwidth constraints respectively. Our collaboration with NXP provided access to a digital outphasing power amplifier, enabling empirical analysis of non-linear behaviour and comparative analysis of behavioural modelling and linearisation efforts. The collaboration resulted in a bench mark for linear wideband operation of a digital outphasing power amplifier. The complimentary linearisation techniques, bandwidth expansion reduction and zero crossing reduction have been evaluated in both simulated and practical outphasing test benches. Initial results are promising and indicate that the benefits they provide are not limited to the outphasing amplifier architecture alone. Overall this thesis presents innovative analysis of the distortion mechanisms of the outphasing power amplifier, highlighting the sensitivity of the system to environmental effects. Practical and novel linearisation techniques are presented, with a focus on enabling wide band operation for modern communications standards

Dispersion Engineered Real-Time Analog Signal Processing Components and Systems

Résumé Avec la demande croissante pour une plus grande efficacité d’utilisation du spectre de fréquences et l’émergence de systèmes à bande ultra large (UWB) qui en découle, l’analyse d’environnements RF en temps réel est devenue d’une importance capitale. Traditionnellement, ceci est fait en utilisant des techniques d’analyse des signaux en temps réel basées soit sur une approche digitale, soit sur une approche analogique. Les appareils digitaux sont plus attrayants aux basses fréquences à cause de leur grande flexibilité, de leur taille compacte, de leur faible coût et de leur grande fiabilité. Par contre, aux plus hautes fréquences, notamment aux fréquences micro-ondes, les appareils digitaux ont des problèmes fondamentaux tels des performances faibles, un coût élevé des convertisseurs A/D et D/A et une consommation de puissance excessive. À ces fréquences, des appareils et systèmes analogiques sont requis pour des applications d’analyse des signaux en temps réel. À cause de leur mode d’opération fondamentalement analogique, ces systèmes sont appel´es analyseurs analogiques de signaux, et l’opération qu’ils effectuent est appelée analyse analogique de signaux (ASP). Cette thèse présente les plus récentes avancées au niveau des ASP. Le concept d’ASP est introduit au chapitre 1. La contribution de cette thèse au domaine des ASP est également présentée au chapitre 1. Le cœur d’un analyseur analogique de signaux en temps réel est une structure de délai dispersive (DDS). Dans une structure dispersive, la vélocité de groupe vg est une fonction de la fréquence, ce qui cause une dépendance en fréquence du délai de groupe. Par conséquent, un signal à large bande qui se propage le long d’une telle structure est sujet à un espacement dans le temps puisque ses différentes composantes spectrales voyagent avec différentes vitesses de groupes, et sont donc réarrangées dans le temps. En exploitant ce réarrangement temporel, les différentes composantes spectrales d’un signal à large bande peuvent être directement transposées dans le domaine temporel et peuvent alors être analysées en temps réel pour diverses applications. Ce concept, qui constitue le fondement des techniques ASP, est décrit au chapitre 2. En se basant sur ces principes de dispersion, le présent travail contribue au développement de nouveaux systèmes et composantes ASP ainsi qu’au développement de nouvelles DDS.----------Abstract With the ever increasing demand on higher spectral efficiencies and the related emergence of ultra-wideband (UWB) systems, monitoring RF environments in real-time has become of paramount interest. This is traditionally done using real-time signal processing techniques based on either digital or analog approaches. Digital devices are most attractive at low frequencies due to their high flexibility, compact size, low cost, and strong reliability. However, at higher frequencies, such as millimeter-wave frequencies, digital devices suffer of fundamental issues, such as poor performance, high cost for A/D and D/A converters, and excessive power consumption. At such frequencies, analog devices and systems are required for real-time signal processing applications. Owing to their fundamentally analog mode of operation, these systems are referred to as Analog Signal Processors, and the operation as Analog Signal Processing (ASP). This dissertation presents the most recent advances in these ASP concepts which are introduced in Chapter 1 along with the contribution of this thesis in this domain. The core of an analog real-time signal processor is a dispersive delay structure (DDS). In a dispersive structure, the group velocity vg is a function of frequency, which results in a frequency-dependent group delay. Consequently, a wide-band signal traveling along such a structure experiences time spreading, since its different spectral components travel with different group velocities and are therefore temporally rearranged. By exploiting this temporal rearrangement, the various spectral components of a wideband signal can be directly mapped onto time domain and can then be processed in real-time for various applications. This concept is described in Chapter 2 which forms the background of ASP techniques. Based on these dispersion principles, this work contributes to the development of novel ASP systems and devices along with the developments of novel DDSs. Two types of DDSs are used in this work: a) Composite Right/Left-Handed (CRLH) transmission lines (TL), and b) all-pass dispersive structures. In particular, the all-pass dispersive delay networks are investigated in greater details based on C-section all-pass networks in various configurations along with novel synthesis procedures and electromagnetic analysis to synthesize arbitrary group delay responses of the DDSs