DP-fill: a dynamic programming approach to X-filling for minimizing peak test power in scan tests

At-speed testing is crucial to catch small delay defects that occur during the manufacture of high performance digital chips. Launch-Off-Capture (LOC) and Launch-Off-Shift (LOS) are two prevalently used schemes for this purpose. LOS scheme achieves higher fault coverage while consuming lesser test time over LOC scheme, but dissipates higher power during the capture phase of the at-speed test. Excessive IR-drop during capture phase on the power grid causes false delay failures leading to significant yield reduction that is unwarranted. As reported in literature, an intelligent filling of don't care bits (X-filling) in test cubes has yielded significant power reduction. Given that the tests output by automatic test pattern generation (ATPG) tools for big circuits have large number of don't care bits, the X-filling technique is very effective for them. Assuming that the design for testability (DFT) scheme preserves the state of the combinational logic between capture phases of successive patterns, this paper maps the problem of optimal X-filling for peak power minimization during LOS scheme to a variant of interval coloring problem and proposes a dynamic programming (DP) algorithm for the same along with a theoretical proof for its optimality. To the best of our knowledge, this is the first ever reported X-filling algorithm that is optimal. The proposed algorithm when experimented on ITC99 benchmarks produced peak power savings of up to 34% over the best known low power X-filling algorithm for LOS testing. Interestingly, it is observed that the power savings increase with the size of the circuit

Algorithms for Power Aware Testing of Nanometer Digital ICs

At-speed testing of deep-submicron digital very large scale integrated (VLSI) circuits has become mandatory to catch small delay defects. Now, due to continuous shrinking of complementary metal oxide semiconductor (CMOS) transistor feature size, power density grows geometrically with technology scaling. Additionally, power dissipation inside a digital circuit during the testing phase (for test vectors under all fault models (Potluri, 2015)) is several times higher than its power dissipation during the normal functional phase of operation. Due to this, the currents that flow in the power grid during the testing phase, are much higher than what the power grid is designed for (the functional phase of operation). As a result, during at-speed testing, the supply grid experiences unacceptable supply IR-drop, ultimately leading to delay failures during at-speed testing. Since these failures are specific to testing and do not occur during functional phase of operation of the chip, these failures are usually referred to false failures, and they reduce the yield of the chip, which is undesirable. In nanometer regime, process parameter variations has become a major problem. Due to the variation in signalling delays caused by these variations, it is important to perform at-speed testing even for stuck faults, to reduce the test escapes (McCluskey and Tseng, 2000; Vorisek et al., 2004). In this context, the problem of excessive peak power dissipation causing false failures, that was addressed previously in the context of at-speed transition fault testing (Saxena et al., 2003; Devanathan et al., 2007a,b,c), also becomes prominent in the context of at-speed testing of stuck faults (Maxwell et al., 1996; McCluskey and Tseng, 2000; Vorisek et al., 2004; Prabhu and Abraham, 2012; Potluri, 2015; Potluri et al., 2015). It is well known that excessive supply IR-drop during at-speed testing can be kept under control by minimizing switching activity during testing (Saxena et al., 2003). There is a rich collection of techniques proposed in the past for reduction of peak switching activity during at-speed testing of transition/delay faults ii in both combinational and sequential circuits. As far as at-speed testing of stuck faults are concerned, while there were some techniques proposed in the past for combinational circuits (Girard et al., 1998; Dabholkar et al., 1998), there are no techniques concerning the same for sequential circuits. This thesis addresses this open problem. We propose algorithms for minimization of peak switching activity during at-speed testing of stuck faults in sequential digital circuits under the combinational state preservation scan (CSP-scan) architecture (Potluri, 2015; Potluri et al., 2015). First, we show that, under this CSP-scan architecture, when the test set is completely specified, the peak switching activity during testing can be minimized by solving the Bottleneck Traveling Salesman Problem (BTSP). This mapping of peak test switching activity minimization problem to BTSP is novel, and proposed for the first time in the literature. Usually, as circuit size increases, the percentage of don’t cares in the test set increases. As a result, test vector ordering for any arbitrary filling of don’t care bits is insufficient for producing effective reduction in switching activity during testing of large circuits. Since don’t cares dominate the test sets for larger circuits, don’t care filling plays a crucial role in reducing switching activity during testing. Taking this into consideration, we propose an algorithm, XStat, which is capable of performing test vector ordering while preserving don’t care bits in the test vectors, following which, the don’t cares are filled in an intelligent fashion for minimizing input switching activity, which effectively minimizes switching activity inside the circuit (Girard et al., 1998). Through empirical validation on benchmark circuits, we show that XStat minimizes peak switching activity significantly, during testing. Although XStat is a very powerful heuristic for minimizing peak input-switchingactivity, it will not guarantee optimality. To address this issue, we propose an algorithm that uses Dynamic Programming to calculate the lower bound for a given sequence of test vectors, and subsequently uses a greedy strategy for filling don’t cares in this sequence to achieve this lower bound, thereby guaranteeing optimality. This algorithm, which we refer to as DP-fill in this thesis, provides the globally optimal solution for minimizing peak input-switching-activity and also is the best known in the literature for minimizing peak input-switching-activity during testing. The proof of optimality of DP-fill in minimizing peak input-switching-activity is also provided in this thesis

A survey of scan-capture power reduction techniques

With the advent of sub-nanometer geometries, integrated circuits (ICs) are required to be checked for newer defects. While scan-based architectures help detect these defects using newer fault models, test data inflation happens, increasing test time and test cost. An automatic test pattern generator (ATPG) exercise’s multiple fault sites simultaneously to reduce test data which causes elevated switching activity during the capture cycle. The switching activity results in an IR drop exceeding the devices under test (DUT) specification. An increase in IR-drop leads to failure of the patterns and may cause good DUTs to fail the test. The problem is severe during at-speed scan testing, which uses a functional rated clock with a high frequency for the capture operation. Researchers have proposed several techniques to reduce capture power. They used various methods, including the reduction of switching activity. This paper reviews the recently proposed techniques. The principle, algorithm, and architecture used in them are discussed, along with key advantages and limitations. In addition, it provides a classification of the techniques based on the method used and its application. The goal is to present a survey of the techniques and prepare a platform for future development in capture power reduction during scan testing

An Efficient Algorithm to Selectively Gate Scan Cells for Capture Power Reduction

[[abstract]]Recently, power dissipation in full-scan testing has brought a great challenge for test engineers. In addition to shift power reduction, excessive switching activity during capture operation may lead to circuit malfunction and yield loss. In this paper, a new algorithm is proposed with using clock gating technique on a part of the scan cells to prevent the internal circuit from unnecessary transitions. These scan cells are divided into several exclusive scan groups. For each test vector, only a portion of the scan groups are activated to store the test response per capture cycle. The proposed method can reduce the capture power dissipation without any influence on fault coverage or testing time. Experimental results for ISCAS'89 benchmark circuits show that the capture power reduction in test sequence can up to 55%.[[notice]]補正完畢[[incitationindex]]EI[[booktype]]紙

Low-Capture-Power Test Generation for Scan-Based At-Speed Testing

Scan-based at-speed testing is a key technology to guarantee timing-related test quality in the deep submicron era. However, its applicability is being severely challenged since significant yield loss may occur from circuit malfunction due to excessive IR drop caused by high power dissipation when a test response is captured. This paper addresses this critical problem with a novel low-capture-power X-filling method of assigning 0\u27s and 1\u27s to unspecified (X) bits in a test cube obtained during ATPG. This method reduces the circuit switching activity in capture mode and can be easily incorporated into any test generation flow to achieve capture power reduction without any area, timing, or fault coverage impact. Test vectors generated with this practical method greatly improve the applicability of scan-based at-speed testing by reducing the risk of test yield lossIEEE International Conference on Test, 2005, 8 November 2005, Austin, TX, US

Optimizing Scrubbing by Netlist Analysis for FPGA Configuration Bit Classification and Floorplanning

Existing scrubbing techniques for SEU mitigation on FPGAs do not guarantee an error-free operation after SEU recovering if the affected configuration bits do belong to feedback loops of the implemented circuits. In this paper, we a) provide a netlist-based circuit analysis technique to distinguish so-called critical configuration bits from essential bits in order to identify configuration bits which will need also state-restoring actions after a recovered SEU and which not. Furthermore, b) an alternative classification approach using fault injection is developed in order to compare both classification techniques. Moreover, c) we will propose a floorplanning approach for reducing the effective number of scrubbed frames and d), experimental results will give evidence that our optimization methodology not only allows to detect errors earlier but also to minimize the Mean-Time-To-Repair (MTTR) of a circuit considerably. In particular, we show that by using our approach, the MTTR for datapath-intensive circuits can be reduced by up to 48.5% in comparison to standard approaches

The Primordial Inflation Explorer (PIXIE): A Nulling Polarimeter for Cosmic Microwave Background Observations

The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission to measure the gravity-wave signature of primordial inflation through its distinctive imprint on the linear polarization of the cosmic microwave background. The instrument consists of a polarizing Michelson interferometer configured as a nulling polarimeter to measure the difference spectrum between orthogonal linear polarizations from two co-aligned beams. Either input can view the sky or a temperature-controlled absolute reference blackbody calibrator. PIXIE will map the absolute intensity and linear polarization (Stokes I, Q, and U parameters) over the full sky in 400 spectral channels spanning 2.5 decades in frequency from 30 GHz to 6 THz (1 cm to 50 um wavelength). Multi-moded optics provide background-limited sensitivity using only 4 detectors, while the highly symmetric design and multiple signal modulations provide robust rejection of potential systematic errors. The principal science goal is the detection and characterization of linear polarization from an inflationary epoch in the early universe, with tensor-to-scalar ratio r < 10^{-3} at 5 standard deviations. The rich PIXIE data set will also constrain physical processes ranging from Big Bang cosmology to the nature of the first stars to physical conditions within the interstellar medium of the Galaxy.Comment: 37 pages including 17 figures. Submitted to the Journal of Cosmology and Astroparticle Physic

Optimal Don’t Care Filling for Minimizing Peak Toggles During At-Speed Stuck-At Testing

Due to the increase in manufacturing/environmental uncertainties in the nanometer regime, testing digital chips under different operating conditions becomes mandatory. Traditionally, stuck-at tests were applied at slow speed to detect structural defects and transition fault tests were applied at-speed to detect delay defects. Recently, it was shown that certain cell-internal defects can only be detected using at-speed stuck-at testing. Stuck-at test patterns are power hungry, thereby causing excessive voltage droop on the power grid, delaying the test response, and finally leading to false delay failures on the tester. This motivates the need for peak power minimization during at-speed stuck-at testing. In this article, we use input toggle minimization as a means to minimize a circuit’s power dissipation during at-speed stuck-at testing under the Combinational State Preservation scan (CSP-scan) Design-For-Testability (DFT) scheme. For circuits whose test sets are dominated by don’t cares, this article maps the problem of optimal X-filling for peak input toggle minimization to a variant of the interval coloring problem and proposes a Dynamic Programming (DP) algorithm (DP-fill) for the same along with a theoretical proof for its optimality. For circuits whose test sets are not dominated by don’t cares, we propose a max scatter Hamiltonian path algorithm, which ensures that the ordering is done such that the don’t cares are evenly distributed in the final ordering of test cubes, thereby leading to better input toggle savings than DP-fill. The proposed algorithms, when experimented on ITC99 benchmarks, produced peak power savings of up to 48% over the best-known algorithms in literature. We have also pruned the solutions thus obtained using Greedy and Simulated Annealing strategies with iterative 1-bit neighborhood to validate our idea of optimal input toggle minimization as an effective technique for minimizing peak power dissipation during at-speed stuck-at testing

Efficient Test Set Modification for Capture Power Reduction

The occurrence of high switching activity when the response to a test vector is captured by flipflops in scan testing may cause excessive IR drop, resulting in significant test-induced yield loss. This paper addresses the problem with a novel method based on test set modification, featuring (1) a new constrained X-identification technique that turns a properly selected set of bits in a fullyspecified test set into X-bits without fault coverage loss, and (2) a new LCP (low capture power) X-filling technique that optimally assigns 0’s and 1’s to the X-bits for the purpose of reducing the switching activity of the resulting test set in capture mode. This method can be readily applied in any test generation flow for capture power reduction without any impact on area, timing, test set size, and fault coverage