65 research outputs found
Novel feedback and signalling mechanisms for interference management and efficient modulation
In order to meet the ever-growing demand for mobile data, a number of different technologies
have been adopted by the fourth generation standardization bodies. These include multiple access
schemes such as spatial division multiple access (SDMA), and efficient modulation techniques
such as orthogonal frequency division multiplexing (OFDM)-based modulation. The
specific objectives of this theses are to develop an effective feedback method for interference
management in smart antenna SDMA systems and to design an efficient OFDM-based modulation
technique, where an additional dimension is added to the conventional two-dimensional
modulation techniques such as quadrature amplitude modulation (QAM).
In SDMA time division duplex (TDD) systems, where channel reciprocity is maintained, uplink
(UL) channel sounding method is considered as one of the most promising feedback methods
due to its bandwidth and delay efficiency. Conventional channel sounding (CCS) only conveys
the channel state information (CSI) of each active user to the base station (BS). Due to
the limitation in system performance because of co-channel interference (CCI) from adjacent
cells in interference-limited scenarios, CSI is only a suboptimal metric for multiuser spatial
multiplexing optimization. The first major contribution of this theses is a novel interference
feedback method proposed to provide the BS with implicit knowledge about the interference
level received by each mobile station (MS). More specifically, it is proposed to weight the
conventional channel sounding pilots by the level of the experienced interference at the userâs
side. Interference-weighted channel sounding (IWCS) acts as a spectrally efficient feedback
technique that provides the BS with implicit knowledge about CCI experienced by each MS,
and significantly improves the downlink (DL) sum capacity for both greedy and fair scheduling
policies. For the sake of completeness, a novel procedure is developed to make the IWCS pilots
usable for UL optimization. It is proposed to divide the optimization metric obtained from the
IWCS pilots by the interference experienced at the BSâs antennas. The resultant new metric, the
channel gain divided by the multiplication of DL and UL interference, provides link-protection
awareness and is used to optimize both UL and DL. Using maximum capacity scheduling criterion,
the link-protection aware metric results in a gain in the median system sum capacity of
26.7% and 12.5% in DL and UL respectively compared to the case when conventional channel
sounding techniques are used. Moreover, heuristic algorithm has been proposed in order to
facilitate a practical optimization and to reduce the computational complexity.
The second major contribution of this theses is an innovative transmission approach, referred
to as subcarrier-index modulation (SIM), which is proposed to be integrated with OFDM. The
key idea of SIM is to employ the subcarrier-index to convey information to the receiver. Furthermore,
a closed-form analytical bit error ratio (BER) of SIM OFDM in Rayleigh channel
is derived. Simulation results show BER performance gain of 4 dB over 4-QAM OFDM for
both coded and uncoded data without power saving policy. Alternatively, power saving policy
maintains an average gain of 1 dB while only using half OFDM symbol transmit power
Radio Communications
In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modiïŹed our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the ïŹeld of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks
Packet scheduling in satellite HSDPA networks.
Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2010.The continuous growth in wireless networks is not showing any sign of slowing down as new services, new technologies and new mobile users continue to emerge. Satellite networks are expected to complement the terrestrial network and be a valid option to provide broadband communications services to both fixed and mobile users in scenarios where terrestrial networks cannot be used due to technical and economical viability. In the current emerging satellite networks, where different users with varying traffic demands ranging from multimedia, voice to data and with limited capacity, Radio Resource Management (RRM) is considered as one of the most significant and challenging aspect needed to provide acceptable quality of service that will meet the requirements of the different mobile users. This dissertation considers Packet Scheduling in the Satellite High Speed Downlink Packet Access (S-HSDPA) network. The main focus of this dissertation is to propose a new cross-layer designed packet scheduling scheme, which is one of the functions of RRM, called Queue Aware Channel Based (QACB) Scheduler. The proposed scheduler, which, attempts to sustain the quality of service requirements of different traffic requests, improves the system performance compared to the existing schedulers. The performance analysis comparison of the throughput, delay and fairness is determined through simulations. These metrics have been chosen they are three major performance indices used in wireless communications. Due to long propagation delay in HSDPA via GEO satellite, there is misalignment between the instantaneous channel condition of the mobile user and the one reported to the base station (Node B) in S-HSDPA. This affects effectiveness of the channel based packet schedulers and leads to either under utilization of resource or loss of packets. Hence, this dissertation investigates the effect of the introduction of a Signal-to-Noise (SNR) Margin which is used to mitigate the effect of the long propagation delay on performance of S-HSDPA, and the appropriate SNR margin to be used to achieve the best performance is determined. This is determined using both a semi-analytical and a simulation approach. The results show that the SNR margin of 1.5 dB produces the best performance.
Finally, the dissertation investigates the effect of the different Radio Link Control (RLC) Transmission modes which are Acknowledged Mode (AM) and Unacknowledged Mode (UM) as it affects different traffic types and schedulers in S-HSDPA. Proportional fair (PF) scheduler and our proposed, QACB, scheduler have been considered as the schedulers for this investigation. The results show that traffic types are sensitive to the transmitting RLC modes and that the QACB scheduler provides better performance compared to PF scheduler in the two RLC modes considered
Advanced Signal Processing Techniques for Two-Way Relaying Networks and Full-Duplex Communication Systems
ï»żSehr hohe Datenraten und stĂ€ndig verfĂŒgbare Netzabdeckung in
zukĂŒnftigen drahtlosen Netzwerken erfordern neue Algorithmen auf der
physischen Schicht. Die Nutzung von Relais stellt ein vielversprechendes
Verfahren dar, da die Netzabdeckung gesteigert werden kann. ZusÀtzlich
steht hierdurch im Vergleich zu Kupfer- oder Glasfaserleitungen eine
preiswerte Lösung zur Anbindung an die Netzinfrastruktur zur VerfĂŒgung.
Traditionelle Einwege-Relais-Techniken (One-Way Relaying [OWR]) nutzen
Halbduplex-Verfahren (HD-Verfahren), welche das Ăbertragungssystem
ausbremst und zu spektralen Verlusten fĂŒhrt. Einerseits erlauben es
Zweiwege-Relais-Techniken (Two-Way Relaying [TWR]), simultan sowohl an das
Relais zu senden als auch von diesem zu empfangen, wodurch im Vergleich zu
OWR das Spektrum effizienter genutzt wird. Aus diesem Grunde untersuchen
wir Zweiwege-Relais und im Speziellen TWR-Systeme fĂŒr den
Mehrpaar-/Mehrnutzer-Betrieb unter Nutzung von Amplify-and-forward-Relais
(AF-Relais). Derartige Szenarien leiden unter Interferenzen zwischen Paaren
bzw. zwischen Nutzern. Um diesen Interferenzen Herr zu werden, werden
hochentwickelte Signalverarbeitungsalgorithmen â oder in anderen Worten
rÀumliche Mehrfachzugriffsverfahren (Spatial Division Multiple Access
[SDMA]) â benötigt. Andererseits kann der spektrale Verlust durch den
HD-Betrieb auch kompensiert werden, wenn das Relais im Vollduplexbetrieb
arbeitet. Nichtsdestotrotz ist ein FD-GerÀt in der Praxis aufgrund starker
interner Selbstinterferenz (SI) und begrenztem Dynamikumfang des
Tranceivers schwer zu realisieren. Aus diesem Grunde sollten
fortschrittliche Verfahren zur SI-ĂnterdrĂŒckung entwickelt werden. Diese
Dissertation trÀgt diesen beiden Zielen Rechnung, indem optimale und/oder
effiziente algebraische Lösungen entwickelt werden, welche verschiedenen
Nutzenfunktionen, wie Summenrate und minimale Sendeleistung, maximieren.Im
ersten Teil studieren wir zunÀchst Mehrpaar-TWR-Netzwerke mit einem
einzelnen Mehrantennen-AF-Relais. Dieser Anwendungsfall kann auch so
betrachtet werden, dass sich mehrere verschiedene Dienstoperatoren Relais
und Spektrum teilen, wobei verschiedene Nutzerpaare zu verschiedenen
Dienstoperatoren gehören. Aktuelle AnsÀtzen zielen auf
InterferenzunterdrĂŒckung ab. Wir schlagen ein auf Projektion basiertes
Verfahren zur Trennung mehrerer Dienstoperatoren (projection based
separation of multiple operators [ProBaSeMO]) vor. ProBaSeMO ist leicht
anpassbar fĂŒr den Fall, dass jeder Nutzer mehrere Antennen besitzt oder
unterschiedliche Systemdesignkriterien angewendet werden mĂŒssen. Als
BewertungsmaĂstab fĂŒr ProBaSeMO entwickeln wir optimale Algorithmen zur
Maximierung der Summenrate, zur Minimierung der Sendeleistung am Relais
oder zur Maximierung des minimalen
Signal-zu-Interferenz-und-Rausch-VerhÀltnisses (Signal to Interference and
Noise Ratio [SINR]) am Nutzer. Zur Maximierung der Summenrate wurden
spezifische gradientenbasierte Methoden entwickelt, die unabhÀngig davon
sind, ob ein Nutzer mit einer oder mehr Antennen ausgestattet ist. Um im
Falle eines âWorst-Caseâ immer noch eine polynomielle Laufzeit zu
garantieren, entwickelten wir einen Algorithmus mit polynomieller Laufzeit.
Dieser ist inspiriert von der âPolynomial Time Difference of Convex
Functionsâ-Methode (POTDC-Methode). BezĂŒglich der Summenrate des Systems
untersuchen wir zuletzt, welche Bedingungen erfĂŒllt sein mĂŒssen, um einen
Gewinn durch gemeinsames Nutzen zu erhalten. Hiernach untersuchen wir die
Maximierung der Summenrate eines Mehrpaar-TWR-Netzwerkes mit mehreren
Einantennen-AF-Relais und Einantennen-Nutzern. Das daraus resultierende
Problem der Summenraten-Maximierung, gebunden an eine bestimmte
Gesamtsendeleistung aller Relais im Netzwerk, ist Àhnlich dem des
vorangegangenen Szenarios. Dementsprechend kann eine optimale Lösung fĂŒr
das eine Szenario auch fĂŒr das jeweils andere Szenario genutzt werden.
Weiterhin werden basierend auf dem Polynomialzeitalgorithmus global
optimale Lösungen entwickelt. Diese Lösungen sind entweder an eine
maximale Gesamtsendeleistung aller Relais oder an eine maximale
Sendeleistung jedes einzelnen Relais gebunden. ZusÀtzlich entwickeln wir
suboptimale Lösungen, die effizient in ihrer Laufzeit sind und eine
Approximation der optimalen Lösung darstellen. Hiernach verlegen wir unser
Augenmerk auf ein Mehrpaar-TWR-Netzwerk mit mehreren Mehrantennen-AF-Relais
und mehreren Repeatern. Solch ein Szenario ist allgemeiner, da die
vorherigen beiden Szenarien als spezielle Realisierungen dieses Szenarios
aufgefasst werden können. Das Interferenz-Management in diesem Szenario
ist herausfordernder aufgrund der vorhandenen Repeater.
Interferenzneutralisierung (IN) stellt eine Lösung dar, um diese Art
Interferenz zu handhaben. Im Zuge dessen werden notwendige und ausreichende
Bedingungen zur Aufhebung der Interferenz hergeleitet. Weiterhin wird ein
Framework entwickelt, dass verschiedene Systemnutzenfunktionen optimiert,
wobei IN im jeweiligen Netzwerk vorhanden sein kann oder auch nicht. Dies
ist unabhÀngig davon, ob die Relais einer maximalen Gesamtsendeleistung
oder einer individuellen maximalen Sendeleistung unterliegen. Letztendlich
entwickeln wir ein Ăbertragungsverfahren sowie ein Vorkodier- und
Dekodierverfahren fĂŒr Basisstationen (BS) in einem TWR-assistierten
Mehrbenutzer-MIMO-Downlink-Kanal. Im Vergleich mit dem
Mehrpaar-TWR-Netzwerk leidet dieses Szenario unter Interferenzen zwischen
den KanÀlen. Wir entwickeln drei suboptimale Algorithmen, welche auf
Kanalinversion basieren. ProBaSeMO und âZero-Forcing Dirty Paper
Codingâ (ZFDPC), welche eine geringe ZeitkomplexitĂ€t aufweisen, schaffen
eine Balance zwischen LeistungsfÀhigkeit und KomplexitÀt. ZusÀtzlich
gibt es jeweils nur geringe EinbrĂŒche in stark beanspruchten
Kommunikationssystemen.Im zweiten Teil untersuchen wir Techniken zur
SI-UnterdrĂŒckung, um den FD-Gewinn in einem Punkt-zu-Punkt-System
auszunutzen. ZunĂ€chst entwickeln wir ein Ăbertragungsverfahren, dass auf
SI RĂŒcksicht nimmt und die SI-UnterdrĂŒckung gegen den Multiplexgewinn
abwÀgt. Die besten Ergebnisse werden durch die perfekte Kenntnis des
Kanals erzielt, was praktisch nicht genau der Fall ist. Aus diesem Grund
werden Ăbertragungstechniken fĂŒr den âWorst Caseâ entwickelt, die den
KanalschÀtzfehlern Rechnung tragen. Diese Fehler werden deterministisch
modelliert und durch Ellipsoide beschrÀnkt. In praktischen Szenarien ist
der HF-Schaltkreise nicht perfekt. Dies hat Einfluss auf die Verfahren zur
SI-UnterdrĂŒckung und fĂŒhrt zu einer Restselbstinterferenz. Wir entwickeln
effiziente Ăbertragungstechniken mittels Beamforming, welche auf dem
Signal-zu-Verlust-und-Rausch-VerhÀltnis (signal to leakage plus noise
ratio [SLNR]) aufbauen, um Unvollkommenheiten der HF-Schaltkreise
auszugleichen. ZusÀtzlich können alle Designkonzepte auf FD-OWR-Systeme
erweitert werden.To enable ultra-high data rate and ubiquitous coverage in future wireless
networks, new physical layer techniques are desired. Relaying is a
promising technique for future wireless networks since it can boost the
coverage and can provide low cost wireless backhauling solutions, as
compared to traditional wired backhauling solutions via fiber and copper.
Traditional one-way relaying (OWR) techniques suffer from the spectral loss
due to the half-duplex (HD) operation at the relay. On one hand, two-way
relaying (TWR) allows the communication partners to transmit to and/or
receive from the relay simultaneously and thus uses the spectrum more
efficiently than OWR. Therefore, we study two-way relays and more
specifically multi-pair/multi-user TWR systems with amplify-and-forward
(AF) relays. These scenarios suffer from inter-pair or inter-user
interference. To deal with the interference, advanced signal processing
algorithms, in other words, spatial division multiple access (SDMA)
techniques, are desired. On the other hand, if the relay is a full-duplex
(FD) relay, the spectral loss due to a HD operation can also be
compensated. However, in practice, a FD device is hard to realize due to
the strong loop-back self-interference and the limited dynamic range at the
transceiver. Thus, advanced self-interference suppression techniques should
be developed. This thesis contributes to the two goals by developing
optimal and/or efficient algebraic solutions for different scenarios
subject to different utility functions of the system, e.g., sum rate
maximization and transmit power minimization. In the first part of this
thesis, we first study a multi-pair TWR network with a multi-antenna AF
relay. This scenario can be also treated as the sharing of the relay and
the spectrum among multiple operators assuming that different pairs of
users belong to different operators. Existing approaches focus on
interference suppression. We propose a projection based separation of
multiple operators (ProBaSeMO) scheme, which can be easily extended when
each user has multiple antennas or when different system design criteria
are applied. To benchmark the ProBaSeMO scheme, we develop optimal relay
transmit strategies to maximize the system sum rate, minimize the required
transmit power at the relay, or maximize the minimum signal to interference
plus noise ratio (SINR) of the users. Specifically for the sum rate
maximization problem, gradient based methods are developed regardless
whether each user has a single antenna or multiple antennas. To guarantee a
worst-case polynomial time solution, we also develop a polynomial time
algorithm which has been inspired by the polynomial time difference of
convex functions (POTDC) method. Finally, we analyze the conditions for
obtaining the sharing gain in terms of the sum rate. Then we study the sum
rate maximization problem of a multi-pair TWR network with multiple single
antenna AF relays and single antenna users. The resulting sum rate
maximization problem, subject to a total transmit power constraint of the
relays in the network, yields a similar problem structure as in the
previous scenario. Therefore the optimal solution for one scenario can be
used for the other. Moreover, a global optimal solution, which is based on
the polyblock approach, and several suboptimal solutions, which are more
computationally efficient and approximate the optimal solution, are
developed when there is a total transmit power constraint of the relays in
the network or each relay has its own transmit power constraint. We then
shift our focus to a multi-pair TWR network with multiple multi-antenna AF
relays and multiple dumb repeaters. This scenario is more general because
the previous two scenarios can be seen as special realizations of this
scenario. The interference management in this scenario is more challenging
due to the existence of the repeaters. Interference neutralization (IN) is
a solution for dealing with this kind of interference. Thereby, necessary
and sufficient conditions for neutralizing the interference are derived.
Moreover, a general framework to optimize different system utility
functions in this network with or without IN is developed regardless
whether the AF relays in the network have a total transmit power limit or
individual transmit power limits. Finally, we develop the relay transmit
strategy as well as base station (BS) precoding and decoding schemes for a
TWR assisted multi-user MIMO (MU-MIMO) downlink channel. Compared to the
multi-pair TWR network, this scenario suffers from the co-channel
interference. We develop three suboptimal algorithms which are based on
channel inversion, ProBaSeMO and zero-forcing dirty paper coding (ZFDPC),
which has a low computational complexity, provides a balance between the
performance and the complexity, and suffers only a little when the system
is heavily loaded, respectively.In the second part of this thesis, we
investigate self-interference (SI) suppression techniques to exploit the FD
gain for a point-to-point MIMO system. We first develop SI aware transmit
strategies, which provide a balance between the SI suppression and the
multiplexing gain of the system. To get the best performance, perfect
channel state information (CSI) is needed, which is imperfect in practice.
Thus, worst case transmit strategies to combat the imperfect CSI are
developed, where the CSI errors are modeled deterministically and bounded
by ellipsoids. In real word applications, the RF chain is imperfect. This
affects the performance of the SI suppression techniques and thus results
in residual SI. We develop efficient transmit beamforming techniques, which
are based on the signal to leakage plus noise ratio (SLNR) criterion, to
deal with the imperfections in the RF chain. All the proposed design
concepts can be extended to FD OWR systems
On-board B-ISDN fast packet switching architectures. Phase 1: Study
The broadband integrate services digital network (B-ISDN) is an emerging telecommunications technology that will meet most of the telecommunications networking needs in the mid-1990's to early next century. The satellite-based system is well positioned for providing B-ISDN service with its inherent capabilities of point-to-multipoint and broadcast transmission, virtually unlimited connectivity between any two points within a beam coverage, short deployment time of communications facility, flexible and dynamic reallocation of space segment capacity, and distance insensitive cost. On-board processing satellites, particularly in a multiple spot beam environment, will provide enhanced connectivity, better performance, optimized access and transmission link design, and lower user service cost. The following are described: the user and network aspects of broadband services; the current development status in broadband services; various satellite network architectures including system design issues; and various fast packet switch architectures and their detail designs
A Comprehensive Survey of the Tactile Internet: State of the art and Research Directions
The Internet has made several giant leaps over the years, from a fixed to a
mobile Internet, then to the Internet of Things, and now to a Tactile Internet.
The Tactile Internet goes far beyond data, audio and video delivery over fixed
and mobile networks, and even beyond allowing communication and collaboration
among things. It is expected to enable haptic communication and allow skill set
delivery over networks. Some examples of potential applications are
tele-surgery, vehicle fleets, augmented reality and industrial process
automation. Several papers already cover many of the Tactile Internet-related
concepts and technologies, such as haptic codecs, applications, and supporting
technologies. However, none of them offers a comprehensive survey of the
Tactile Internet, including its architectures and algorithms. Furthermore, none
of them provides a systematic and critical review of the existing solutions. To
address these lacunae, we provide a comprehensive survey of the architectures
and algorithms proposed to date for the Tactile Internet. In addition, we
critically review them using a well-defined set of requirements and discuss
some of the lessons learned as well as the most promising research directions
Application of Asynchronous Transfer Mode (Atm) technology to Picture Archiving and Communication Systems (Pacs): A survey
Broadband Integrated Services Digital Network (R-ISDN) provides a range of narrowband and broad-band services for voice, video, and multimedia. Asynchronous Transfer Mode (ATM) has been selected by the standards bodies as the transfer mode for implementing B-ISDN; The ability to digitize images has lead to the prospect of reducing the physical space requirements, material costs, and manual labor of traditional film handling tasks in hospitals. The system which handles the acquisition, storage, and transmission of medical images is called a Picture Archiving and Communication System (PACS). The transmission system will directly impact the speed of image transfer. Today the most common transmission means used by acquisition and display station products is Ethernet. However, when considering network media, it is important to consider what the long term needs will be. Although ATM is a new standard, it is showing signs of becoming the next logical step to meet the needs of high speed networks; This thesis is a survey on ATM, and PACS. All the concepts involved in developing a PACS are presented in an orderly manner. It presents the recent developments in ATM, its applicability to PACS and the issues to be resolved for realising an ATM-based complete PACS. This work will be useful in providing the latest information, for any future research on ATM-based networks, and PACS
- âŠ