GMPLS-controlled OBS Network Simulator: Implementation of the signaling protocol

Projecte final de carrera fet en col.laboració amb ISCTE-IUL LisboaThe Optical Burst Switching (OBS) paradigm is regaining greater attention by the professionals and researchers of the optical networking field, as it offers a number of advantages when compared with other optical switching paradigms. This type of technology was developed with the objective to carry information all-optically without using any kind of buffering device. However, due to its one-way signaling process, the presence of a control plane is extremely useful to manage complementary signaling and routing features, providing flexibility, reliability and taking more benefits of the OBS networks. The goal of this project is to extend Generalized Multiprotocol Label Switching (GMPLS) control plane architecture to properly handle OBS networks. In spite of GMPLS is not prepared to lead with these type of networks, this flexible architecture has been seen as a potential candidate to be used as the control plane of other kinds of optical networks (e.g., IP, Ethernet, Optical Circuit networks) and therefore to manage control OBS networks. In this project, the existent event-driven JAVA simulator for OBS networks – JAVOBS – is extended to simulate a possible interoperability model between GMPLS and OBS technologies. The first objective is to implement a new control layer (GMPLS) separated from the data layer of the OBS network. The second and main objective fits on the basic signaling procedures implementation of the GMPLS Reservation Protocol-Traffic Engineering (RSVP-TE) protocol, in order to analyze the performance of the OBS network’s behavior when it is controlled by such interoperable control plane (GMPLS/OBS)

Analysis of RSVP-TE graceful restart

GMPLS is viewed as an attractive intelligent control plane for different network technologies and graceful restart is a key technique in ensuring this control plane is resilient and able to recover adequately from faults. This paper analyses the graceful restart mechanism proposed for a key GMPLS protocol, RSVP-TE. A novel analytical model, which may be readily adapted to study other protocols, is developed. This model allows the efficacy of graceful restart to be evaluated in a number of scenarios. It is found that, unsurprisingly, increasing control message loss and increasing the number of data plane connections both increased the time to complete recovery. It was also discovered that a threshold exists beyond which a relatively small change in the control message loss probability causes a disproportionately large increase in the time to complete recovery. The interesting findings in this work suggest that the performance of graceful restart is worthy of further investigation, with emphasis being placed on exploring procedures to optimise the performance of graceful restart

A Survey on the Path Computation Element (PCE) Architecture

Quality of Service-enabled applications and services rely on Traffic Engineering-based (TE) Label Switched Paths (LSP) established in core networks and controlled by the GMPLS control plane. Path computation process is crucial to achieve the desired TE objective. Its actual effectiveness depends on a number of factors. Mechanisms utilized to update topology and TE information, as well as the latency between path computation and resource reservation, which is typically distributed, may affect path computation efficiency. Moreover, TE visibility is limited in many network scenarios, such as multi-layer, multi-domain and multi-carrier networks, and it may negatively impact resource utilization. The Internet Engineering Task Force (IETF) has promoted the Path Computation Element (PCE) architecture, proposing a dedicated network entity devoted to path computation process. The PCE represents a flexible instrument to overcome visibility and distributed provisioning inefficiencies. Communications between path computation clients (PCC) and PCEs, realized through the PCE Protocol (PCEP), also enable inter-PCE communications offering an attractive way to perform TE-based path computation among cooperating PCEs in multi-layer/domain scenarios, while preserving scalability and confidentiality. This survey presents the state-of-the-art on the PCE architecture for GMPLS-controlled networks carried out by research and standardization community. In this work, packet (i.e., MPLS-TE and MPLS-TP) and wavelength/spectrum (i.e., WSON and SSON) switching capabilities are the considered technological platforms, in which the PCE is shown to achieve a number of evident benefits

GMPLS-controlled OBS Network Simulator: Implementation of the signaling protocol

Projecte final de carrera fet en col.laboració amb ISCTE-IUL LisboaThe Optical Burst Switching (OBS) paradigm is regaining greater attention by the professionals and researchers of the optical networking field, as it offers a number of advantages when compared with other optical switching paradigms. This type of technology was developed with the objective to carry information all-optically without using any kind of buffering device. However, due to its one-way signaling process, the presence of a control plane is extremely useful to manage complementary signaling and routing features, providing flexibility, reliability and taking more benefits of the OBS networks. The goal of this project is to extend Generalized Multiprotocol Label Switching (GMPLS) control plane architecture to properly handle OBS networks. In spite of GMPLS is not prepared to lead with these type of networks, this flexible architecture has been seen as a potential candidate to be used as the control plane of other kinds of optical networks (e.g., IP, Ethernet, Optical Circuit networks) and therefore to manage control OBS networks. In this project, the existent event-driven JAVA simulator for OBS networks – JAVOBS – is extended to simulate a possible interoperability model between GMPLS and OBS technologies. The first objective is to implement a new control layer (GMPLS) separated from the data layer of the OBS network. The second and main objective fits on the basic signaling procedures implementation of the GMPLS Reservation Protocol-Traffic Engineering (RSVP-TE) protocol, in order to analyze the performance of the OBS network’s behavior when it is controlled by such interoperable control plane (GMPLS/OBS)