33 research outputs found

    Design of optimal equalizers and precoders for MIMO channels

    Get PDF
    Channel equalization has been extensively studied as a method of combating ISI and ICI for high speed MIMO data communication systems. This dissertation focuses on optimal channel equalization in the presence of non-white observation noises with unknown PSD but bounded power-norm. A worst-case approach to optimal design of channel equalizers leads to an equivalent optimal H-infinity filtering problem for the MIMO communication systems. An explicit design algorithm is derived which not only achieves the zero-forcing (ZF) condition, but also minimizes the RMS error between the transmitted symbols and the received symbols. The second part of this dissertation investigates the design of optimal precoders which minimize the bit error rate (BER) subject to a fixed transmit-power constraint for the multiple antennas downlink communication channels under the perfect reconstruction (PR) condition. The closed form solutions are derived and an efficient design algorithm is proposed. The performance evaluations indicate that the optimal precoder design for multiple antennas communication systems proposed herein is an attractive/reasonable alternative to the existing precoder design techniques

    Optimal channel equalization for filterbank transceivers in presence of white noise

    Get PDF
    Filterbank transceivers are widely employed in data communication networks to cope with inter-symbol-interference (ISI) through the use of redundancies. This dissertation studies the design of the optimal channel equalizer for both time-invariant and time-varying channels, and wide-sense stationary (WSS) and possible non-stationary white noise processes. Channel equalization is investigated via the filterbank transceivers approach. All perfect reconstruction (PR) or zero-forcing (ZF) receiver filterbanks are parameterized in an affine form, which eliminate completely the ISI. The optimal channel equalizer is designed through minimization of the mean-squared-error (MSE) between the detected signals and the transmitted signals. Our main results show that the optimal channel equalizer has the form of state estimators, and is a modified Kalman filter. The results in this dissertation are applicable to discrete wavelet multitone (DWMT) systems, multirate transmultiplexers, orthogonal frequency division multiplexing (OFDM), and direct-sequence/spread-spectrum (DS/SS) based code division multiple access (CDMA) networks. Design algorithms for the optimal channel equalizers are developed for different channel models, and white noise processes, and simulation examples are worked out to illustrate the proposed design algorithms

    Approximation of L\"owdin Orthogonalization to a Spectrally Efficient Orthogonal Overlapping PPM Design for UWB Impulse Radio

    Full text link
    In this paper we consider the design of spectrally efficient time-limited pulses for ultrawideband (UWB) systems using an overlapping pulse position modulation scheme. For this we investigate an orthogonalization method, which was developed in 1950 by Per-Olov L\"owdin. Our objective is to obtain a set of N orthogonal (L\"owdin) pulses, which remain time-limited and spectrally efficient for UWB systems, from a set of N equidistant translates of a time-limited optimal spectral designed UWB pulse. We derive an approximate L\"owdin orthogonalization (ALO) by using circulant approximations for the Gram matrix to obtain a practical filter implementation. We show that the centered ALO and L\"owdin pulses converge pointwise to the same Nyquist pulse as N tends to infinity. The set of translates of the Nyquist pulse forms an orthonormal basis or the shift-invariant space generated by the initial spectral optimal pulse. The ALO transform provides a closed-form approximation of the L\"owdin transform, which can be implemented in an analog fashion without the need of analog to digital conversions. Furthermore, we investigate the interplay between the optimization and the orthogonalization procedure by using methods from the theory of shift-invariant spaces. Finally we develop a connection between our results and wavelet and frame theory.Comment: 33 pages, 11 figures. Accepted for publication 9 Sep 201

    Wireless Channel Equalization in Digital Communication Systems

    Get PDF
    Our modern society has transformed to an information-demanding system, seeking voice, video, and data in quantities that could not be imagined even a decade ago. The mobility of communicators has added more challenges. One of the new challenges is to conceive highly reliable and fast communication system unaffected by the problems caused in the multipath fading wireless channels. Our quest is to remove one of the obstacles in the way of achieving ultimately fast and reliable wireless digital communication, namely Inter-Symbol Interference (ISI), the intensity of which makes the channel noise inconsequential. The theoretical background for wireless channels modeling and adaptive signal processing are covered in first two chapters of dissertation. The approach of this thesis is not based on one methodology but several algorithms and configurations that are proposed and examined to fight the ISI problem. There are two main categories of channel equalization techniques, supervised (training) and blind unsupervised (blind) modes. We have studied the application of a new and specially modified neural network requiring very short training period for the proper channel equalization in supervised mode. The promising performance in the graphs for this network is presented in chapter 4. For blind modes two distinctive methodologies are presented and studied. Chapter 3 covers the concept of multiple cooperative algorithms for the cases of two and three cooperative algorithms. The select absolutely larger equalized signal and majority vote methods have been used in 2-and 3-algoirithm systems respectively. Many of the demonstrated results are encouraging for further research. Chapter 5 involves the application of general concept of simulated annealing in blind mode equalization. A limited strategy of constant annealing noise is experimented for testing the simple algorithms used in multiple systems. Convergence to local stationary points of the cost function in parameter space is clearly demonstrated and that justifies the use of additional noise. The capability of the adding the random noise to release the algorithm from the local traps is established in several cases

    Sparse equalizer filter design for multi-path channels

    Get PDF
    Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 81-82).In this thesis, sparse Finite Impulse Response (FIR) equalizers are designed for sparse multi-path channels under a pre-defined Mean Squared Error (MSE) constraint. We start by examining the intrinsic sparsity of the Zero Forcing equalizers and the FIR Minimum MSE (MMSE) equalizers. Next the equalization MSE is formulated as a quadratic function of the equalizer coefficients. Both the Linear Equalizer (LE) and the Decision Feedback Equalizer (DFE) are analyzed. Utilizing the quadratic form, designing a sparse equalizer under a single MSE constraint becomes an 10-norm minimization problem under a quadratic constraint, as described in [2]. Three previously developed methods for solving this problem are applied, namely the successive thinning algorithm, the branch-and-bound algorithm, and the simple linear programming algorithm. Simulations under various channel specifications, equalizer specifications and algorithm specifications are conducted to show the dependency of the sparsity on these factors. The channels include the ideal discrete multipath channels and the Vehicular A multi-path channels in both the Single-Input-Single- Output (SISO) and the Multiple-Input-Multiple-Output scenarios. Additionally, the sparse FIR equalizer is designed for MIMO channels under two MSE constraints. This is formulated as an 10-norm minimization problem under two quadratic constraints. A sub-optimal solution by decoupling the two constraints is proposed.by Xue Feng.S.M

    A compressed sensing approach to block-iterative equalization: connections and applications to radar imaging reconstruction

    Get PDF
    The widespread of underdetermined systems has brought forth a variety of new algorithmic solutions, which capitalize on the Compressed Sensing (CS) of sparse data. While well known greedy or iterative threshold type of CS recursions take the form of an adaptive filter followed by a proximal operator, this is no different in spirit from the role of block iterative decision-feedback equalizers (BI-DFE), where structure is roughly exploited by the signal constellation slicer. By taking advantage of the intrinsic sparsity of signal modulations in a communications scenario, the concept of interblock interference (IBI) can be approached more cunningly in light of CS concepts, whereby the optimal feedback of detected symbols is devised adaptively. The new DFE takes the form of a more efficient re-estimation scheme, proposed under recursive-least-squares based adaptations. Whenever suitable, these recursions are derived under a reduced-complexity, widely-linear formulation, which further reduces the minimum-mean-square-error (MMSE) in comparison with traditional strictly-linear approaches. Besides maximizing system throughput, the new algorithms exhibit significantly higher performance when compared to existing methods. Our reasoning will also show that a properly formulated BI-DFE turns out to be a powerful CS algorithm itself. A new algorithm, referred to as CS-Block DFE (CS-BDFE) exhibits improved convergence and detection when compared to first order methods, thus outperforming the state-of-the-art Complex Approximate Message Passing (CAMP) recursions. The merits of the new recursions are illustrated under a novel 3D MIMO Radar formulation, where the CAMP algorithm is shown to fail with respect to important performance measures.A proliferação de sistemas sub-determinados trouxe a tona uma gama de novas soluções algorítmicas, baseadas no sensoriamento compressivo (CS) de dados esparsos. As recursões do tipo greedy e de limitação iterativa para CS se apresentam comumente como um filtro adaptativo seguido de um operador proximal, não muito diferente dos equalizadores de realimentação de decisão iterativos em blocos (BI-DFE), em que um decisor explora a estrutura do sinal de constelação. A partir da esparsidade intrínseca presente na modulação de sinais no contexto de comunicações, a interferência entre blocos (IBI) pode ser abordada utilizando-se o conceito de CS, onde a realimentação ótima de símbolos detectados é realizada de forma adaptativa. O novo DFE se apresenta como um esquema mais eficiente de reestimação, baseado na atualização por mínimos quadrados recursivos (RLS). Sempre que possível estas recursões são propostas via formulação linear no sentido amplo, o que reduz ainda mais o erro médio quadrático mínimo (MMSE) em comparação com abordagens tradicionais. Além de maximizar a taxa de transferência de informação, o novo algoritmo exibe um desempenho significativamente superior quando comparado aos métodos existentes. Também mostraremos que um equalizador BI-DFE formulado adequadamente se torna um poderoso algoritmo de CS. O novo algoritmo CS-BDFE apresenta convergência e detecção aprimoradas, quando comparado a métodos de primeira ordem, superando as recursões de Passagem de Mensagem Aproximada para Complexos (CAMP). Os méritos das novas recursões são ilustrados através de um modelo tridimensional para radares MIMO recentemente proposto, onde o algoritmo CAMP falha em aspectos importantes de medidas de desempenho

    Stability results for constrained dynamical systems

    Get PDF
    Differential-Algebraic Equations (DAE) provide an appropriate framework to model and analyse dynamic systems with constraints. This framework facilitates modelling of the system behaviour through natural physical variables of the system, while preserving the topological constraints of the system. The main purpose of this dissertation is to investigate stability properties of two important classes of DAEs. We consider some special cases of Linear Time Invariant (LTI) DAEs with control inputs and outputs, and also a special class of Linear switched DAEs. In the first part of the thesis, we consider LTI systems, where we focus on two properties: passivity and a generalization of passivity and small gain theorems called mixed property. These properties play an important role in the control design of large-scale interconnected systems. An important bottleneck for a design based on the aforementioned properties is their verification. Hence we intend to develop easily verifiable conditions to check passivity and mixedness of Single Input Single Output (SISO) and Multiple Input Multiple Output (MIMO) DAEs. For linear switched DAEs, we focus on the Lyapunov stability and this problem forms the basis for the second part of the thesis. In this part, we try to find conditions under which there exists a common Lyapunov function for all modes of the switched system, thus guaranteeing exponential stability of the switched system. These results are primarily developed for continuous-time systems. However, simulation and control design of a dynamic system requires a discrete-time representation of the system that we are interested in. Thus, it is critical to establish whether discrete-time systems, inherit fundamental properties of the continuous-time systems from which they are derived. Hence, the third part of our thesis is dedicated to the problems of preserving passivity, mixedness and Lyapunov stability under discretization. In this part, we examine several existing discretization methods and find conditions under which they preserve the stability properties discussed in the thesis

    Stability results for constrained dynamical systems

    Get PDF
    Differential-Algebraic Equations (DAE) provide an appropriate framework to model and analyse dynamic systems with constraints. This framework facilitates modelling of the system behaviour through natural physical variables of the system, while preserving the topological constraints of the system. The main purpose of this dissertation is to investigate stability properties of two important classes of DAEs. We consider some special cases of Linear Time Invariant (LTI) DAEs with control inputs and outputs, and also a special class of Linear switched DAEs. In the first part of the thesis, we consider LTI systems, where we focus on two properties: passivity and a generalization of passivity and small gain theorems called mixed property. These properties play an important role in the control design of large-scale interconnected systems. An important bottleneck for a design based on the aforementioned properties is their verification. Hence we intend to develop easily verifiable conditions to check passivity and mixedness of Single Input Single Output (SISO) and Multiple Input Multiple Output (MIMO) DAEs. For linear switched DAEs, we focus on the Lyapunov stability and this problem forms the basis for the second part of the thesis. In this part, we try to find conditions under which there exists a common Lyapunov function for all modes of the switched system, thus guaranteeing exponential stability of the switched system. These results are primarily developed for continuous-time systems. However, simulation and control design of a dynamic system requires a discrete-time representation of the system that we are interested in. Thus, it is critical to establish whether discrete-time systems, inherit fundamental properties of the continuous-time systems from which they are derived. Hence, the third part of our thesis is dedicated to the problems of preserving passivity, mixedness and Lyapunov stability under discretization. In this part, we examine several existing discretization methods and find conditions under which they preserve the stability properties discussed in the thesis

    Joint compensation of I/Q impairments and PA nonlinearity in mobile broadband wireless transmitters

    Get PDF
    The main focus of this thesis is to develop and investigate a new possible solution for compensation of in-phase/quadrature-phase (I/Q) impairments and power amplifier (PA) nonlinearity in wireless transmitters using accurate, low complexity digital predistortion (DPD) technique. After analysing the distortion created by I/Q modulators and PAs together with nonlinear crosstalk effects in multi-branch multiple input multiple output (MIMO) wireless transmitters, a novel two-box model is proposed for eliminating those effects. The model is realised by implementing two phases which provide an optimisation of the identification of any system. Another improvement is the capability of higher performance of the system without increasing the computational complexity. Compared with conventional and recently proposed models, the approach developed in this thesis shows promising results in the linearisation of wireless transmitters. Furthermore, the two-box model is extended for concurrent dual-band wireless transmitters and it takes into account cross-modulation (CM) products. Besides, it uses independent processing blocks for both frequency bands and reduces the sampling rate requirements of converters (digital-to-analogue and analogue-to-digital). By using two phases for the implementation, the model enables a scaling down of the nonlinear order and the memory depth of the applied mathematical functions. This leads to a reduced computational complexity in comparison with recently developed models. The thesis provides experimental verification of the two-box model for multi-branch MIMO and concurrent dual-band wireless transmitters. Accordingly, the results ensure both the compensation of distortion and the performance evaluation of modern broadband wireless transmitters in terms of accuracy and complexity
    corecore