Detection and handling of overlapping speech for speaker diarization

For the last several years, speaker diarization has been attracting substantial research attention as one of the spoken language technologies applied for the improvement, or enrichment, of recording transcriptions. Recordings of meetings, compared to other domains, exhibit an increased complexity due to the spontaneity of speech, reverberation effects, and also due to the presence of overlapping speech. Overlapping speech refers to situations when two or more speakers are speaking simultaneously. In meeting data, a substantial portion of errors of the conventional speaker diarization systems can be ascribed to speaker overlaps, since usually only one speaker label is assigned per segment. Furthermore, simultaneous speech included in training data can eventually lead to corrupt single-speaker models and thus to a worse segmentation. This thesis concerns the detection of overlapping speech segments and its further application for the improvement of speaker diarization performance. We propose the use of three spatial cross-correlationbased parameters for overlap detection on distant microphone channel data. Spatial features from different microphone pairs are fused by means of principal component analysis, linear discriminant analysis, or by a multi-layer perceptron. In addition, we also investigate the possibility of employing longterm prosodic information. The most suitable subset from a set of candidate prosodic features is determined in two steps. Firstly, a ranking according to mRMR criterion is obtained, and then, a standard hill-climbing wrapper approach is applied in order to determine the optimal number of features. The novel spatial as well as prosodic parameters are used in combination with spectral-based features suggested previously in the literature. In experiments conducted on AMI meeting data, we show that the newly proposed features do contribute to the detection of overlapping speech, especially on data originating from a single recording site. In speaker diarization, for segments including detected speaker overlap, a second speaker label is picked, and such segments are also discarded from the model training. The proposed overlap labeling technique is integrated in Viterbi decoding, a part of the diarization algorithm. During the system development it was discovered that it is favorable to do an independent optimization of overlap exclusion and labeling with respect to the overlap detection system. We report improvements over the baseline diarization system on both single- and multi-site AMI data. Preliminary experiments with NIST RT data show DER improvement on the RT ¿09 meeting recordings as well. The addition of beamforming and TDOA feature stream into the baseline diarization system, which was aimed at improving the clustering process, results in a bit higher effectiveness of the overlap labeling algorithm. A more detailed analysis on the overlap exclusion behavior reveals big improvement contrasts between individual meeting recordings as well as between various settings of the overlap detection operation point. However, a high performance variability across different recordings is also typical of the baseline diarization system, without any overlap handling

I hear you eat and speak: automatic recognition of eating condition and food type, use-cases, and impact on ASR performance

We propose a new recognition task in the area of computational paralinguistics: automatic recognition of eating conditions in speech, i. e., whether people are eating while speaking, and what they are eating. To this end, we introduce the audio-visual iHEARu-EAT database featuring 1.6 k utterances of 30 subjects (mean age: 26.1 years, standard deviation: 2.66 years, gender balanced, German speakers), six types of food (Apple, Nectarine, Banana, Haribo Smurfs, Biscuit, and Crisps), and read as well as spontaneous speech, which is made publicly available for research purposes. We start with demonstrating that for automatic speech recognition (ASR), it pays off to know whether speakers are eating or not. We also propose automatic classification both by brute-forcing of low-level acoustic features as well as higher-level features related to intelligibility, obtained from an Automatic Speech Recogniser. Prediction of the eating condition was performed with a Support Vector Machine (SVM) classifier employed in a leave-one-speaker-out evaluation framework. Results show that the binary prediction of eating condition (i. e., eating or not eating) can be easily solved independently of the speaking condition; the obtained average recalls are all above 90%. Low-level acoustic features provide the best performance on spontaneous speech, which reaches up to 62.3% average recall for multi-way classification of the eating condition, i. e., discriminating the six types of food, as well as not eating. The early fusion of features related to intelligibility with the brute-forced acoustic feature set improves the performance on read speech, reaching a 66.4% average recall for the multi-way classification task. Analysing features and classifier errors leads to a suitable ordinal scale for eating conditions, on which automatic regression can be performed with up to 56.2% determination coefficient

Signal Processing and Machine Learning Techniques Towards Various Real-World Applications

abstract: Machine learning (ML) has played an important role in several modern technological innovations and has become an important tool for researchers in various fields of interest. Besides engineering, ML techniques have started to spread across various departments of study, like health-care, medicine, diagnostics, social science, finance, economics etc. These techniques require data to train the algorithms and model a complex system and make predictions based on that model. Due to development of sophisticated sensors it has become easier to collect large volumes of data which is used to make necessary hypotheses using ML. The promising results obtained using ML have opened up new opportunities of research across various departments and this dissertation is a manifestation of it. Here, some unique studies have been presented, from which valuable inference have been drawn for a real-world complex system. Each study has its own unique sets of motivation and relevance to the real world. An ensemble of signal processing (SP) and ML techniques have been explored in each study. This dissertation provides the detailed systematic approach and discusses the results achieved in each study. Valuable inferences drawn from each study play a vital role in areas of science and technology, and it is worth further investigation. This dissertation also provides a set of useful SP and ML tools for researchers in various fields of interest.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Voice source characterization for prosodic and spectral manipulation

The objective of this dissertation is to study and develop techniques to decompose the speech signal into its two main components: voice source and vocal tract. Our main efforts are on the glottal pulse analysis and characterization. We want to explore the utility of this model in different areas of speech processing: speech synthesis, voice conversion or emotion detection among others. Thus, we will study different techniques for prosodic and spectral manipulation. One of our requirements is that the methods should be robust enough to work with the large databases typical of speech synthesis. We use a speech production model in which the glottal flow produced by the vibrating vocal folds goes through the vocal (and nasal) tract cavities and its radiated by the lips. Removing the effect of the vocal tract from the speech signal to obtain the glottal pulse is known as inverse filtering. We use a parametric model fo the glottal pulse directly in the source-filter decomposition phase. In order to validate the accuracy of the parametrization algorithm, we designed a synthetic corpus using LF glottal parameters reported in the literature, complemented with our own results from the vowel database. The results show that our method gives satisfactory results in a wide range of glottal configurations and at different levels of SNR. Our method using the whitened residual compared favorably to this reference, achieving high quality ratings (Good-Excellent). Our full parametrized system scored lower than the other two ranking in third place, but still higher than the acceptance threshold (Fair-Good). Next we proposed two methods for prosody modification, one for each of the residual representations explained above. The first method used our full parametrization system and frame interpolation to perform the desired changes in pitch and duration. The second method used resampling on the residual waveform and a frame selection technique to generate a new sequence of frames to be synthesized. The results showed that both methods are rated similarly (Fair-Good) and that more work is needed in order to achieve quality levels similar to the reference methods. As part of this dissertation, we have studied the application of our models in three different areas: voice conversion, voice quality analysis and emotion recognition. We have included our speech production model in a reference voice conversion system, to evaluate the impact of our parametrization in this task. The results showed that the evaluators preferred our method over the original one, rating it with a higher score in the MOS scale. To study the voice quality, we recorded a small database consisting of isolated, sustained Spanish vowels in four different phonations (modal, rough, creaky and falsetto) and were later also used in our study of voice quality. Comparing the results with those reported in the literature, we found them to generally agree with previous findings. Some differences existed, but they could be attributed to the difficulties in comparing voice qualities produced by different speakers. At the same time we conducted experiments in the field of voice quality identification, with very good results. We have also evaluated the performance of an automatic emotion classifier based on GMM using glottal measures. For each emotion, we have trained an specific model using different features, comparing our parametrization to a baseline system using spectral and prosodic characteristics. The results of the test were very satisfactory, showing a relative error reduction of more than 20% with respect to the baseline system. The accuracy of the different emotions detection was also high, improving the results of previously reported works using the same database. Overall, we can conclude that the glottal source parameters extracted using our algorithm have a positive impact in the field of automatic emotion classification

Multi-categories tool wear classification in micro-milling

Ph.DDOCTOR OF PHILOSOPH

Vibration Monitoring: Gearbox identification and faults detection

L'abstract è presente nell'allegato / the abstract is in the attachmen

Machine learning methods for automatic silent speech recognition using a wearable graphene strain gauge sensor

Silent speech recognition is the ability to recognise intended speech without audio information. Useful applications can be found in situations where sound waves are not produced or cannot be heard. Examples include speakers with physical voice impairments or environments in which audio transference is not reliable or secure. Developing a device which can detect non-auditory signals and map them to intended phonation could be used to develop a device to assist in such situations. In this work, we propose a graphene-based strain gauge sensor which can be worn on the throat and detect small muscle movements and vibrations. Machine learning algorithms then decode the non-audio signals and create a prediction on intended speech. The proposed strain gauge sensor is highly wearable, utilising graphene’s unique and beneficial properties including strength, flexibility and high conductivity. A highly flexible and wearable sensor able to pick up small throat movements is fabricated by screen printing graphene onto lycra fabric. A framework for interpreting this information is proposed which explores the use of several machine learning techniques to predict intended words from the signals. A dataset of 15 unique words and four movements, each with 20 repetitions, was developed and used for the training of the machine learning algorithms. The results demonstrate the ability for such sensors to be able to predict spoken words. We produced a word accuracy rate of 55% on the word dataset and 85% on the movements dataset. This work demonstrates a proof-of-concept for the viability of combining a highly wearable graphene strain gauge and machine leaning methods to automate silent speech recognition.EP/S023046/