Single-Event Upset Analysis and Protection in High Speed Circuits

The effect of single-event transients (SETs) (at a combinational node of a design) on the system reliability is becoming a big concern for ICs manufactured using advanced technologies. An SET at a node of combinational part may cause a transient pulse at the input of a flip-flop and consequently is latched in the flip-flop and generates a soft-error. When an SET conjoined with a transition at a node along a critical path of the combinational part of a design, a transient delay fault may occur at the input of a flip-flop. On the other hand, increasing pipeline depth and using low power techniques such as multi-level power supply, and multi-threshold transistor convert almost all paths in a circuit to critical ones. Thus, studying the behavior of the SET in these kinds of circuits needs special attention. This paper studies the dynamic behavior of a circuit with massive critical paths in the presence of an SET. We also propose a novel flip-flop architecture to mitigate the effects of such SETs in combinational circuits. Furthermore, the proposed architecture can tolerant a single event upset (SEU) caused by particle strike on the internal nodes of a flip-flo

Bridging the Testing Speed Gap: Design for Delay Testability

The economic testing of high-speed digital ICs is becoming increasingly problematic. Even advanced, expensive testers are not always capable of testing these ICs because of their high-speed limitations. This paper focuses on a design for delay testability technique such that high-speed ICs can be tested using inexpensive, low-speed ATE. Also extensions for possible full BIST of delay faults are addresse

On testing VLSI chips for the big Viterbi decoder

A general technique that can be used in testing very large scale integrated (VLSI) chips for the Big Viterbi Decoder (BVD) system is described. The test technique is divided into functional testing and fault-coverage testing. The purpose of functional testing is to verify that the design works functionally. Functional test vectors are converted from outputs of software simulations which simulate the BVD functionally. Fault-coverage testing is used to detect and, in some cases, to locate faulty components caused by bad fabrication. This type of testing is useful in screening out bad chips. Finally, design for testability, which is included in the BVD VLSI chip design, is described in considerable detail. Both the observability and controllability of a VLSI chip are greatly enhanced by including the design for the testability feature

Testing of Asynchronous NULL Conventional Logic (NCL) Circuits

Due to the absence of a global clock and presence of more state holding elements that synchronize the control and data paths, conventional automatic test pattern generation (ATPG) algorithms would fail when applied to asynchronous circuits, leading to poor fault coverage. This paper focuses on design for test (DFT) techniques aimed at making asynchronous NCL designs testable using existing DFT CAD tools with reasonable gate overhead, by enhancing controllability of feedback nets and observability for fault sites that are flagged unobservable. The proposed approach performs scan and test points insertion on NCL designs using custom ATPG library. The approach has been automated, which is essential for large systems; and are fully compatible with industry standard tools

DFT Techniques and Automation for Asynchronous NULL Conventional Logic Circuits

Conventional automatic test pattern generation (ATPG) algorithms fail when applied to asynchronous NULL convention logic (NCL) circuits due to the absence of a global clock and presence of more state-holding elements, leading to poor fault coverage. This paper presents a design-for-test (DFT) approach aimed at making asynchronous NCL designs testable using conventional ATPG programs. We propose an automatic DFT insertion flow (ADIF) methodology that performs scan and test point insertion on NCL designs to improve test coverage, using a custom ATPG library. Experimental results show significant increase in fault coverage for NCL cyclic and acyclic pipelined designs

A testability metric for path delay faults and its application

Abstract — In this paper, we propose a new testability metric for path delay faults. The metric is computed efficiently using a non-enumerative algorithm. It has been validated through extensive experiments and the results indicate a strong correlation between the proposed metric and the path delay fault testability of the circuit. We further apply this metric to derive a path delay fault test application scheme for scan-based BIST. The selection of the test scheme is guided by the proposed metric. The experimental results illustrate that the derived test application scheme can achieve a higher path delay fault coverage in scan-based BIST. Because of the effectiveness and efficient computation of this metric, it can be used to derive other design-for-testability techniques for path delay faults. I