An investigation into spike-based neuromorphic approaches for artificial olfactory systems

The implementation of neuromorphic methods has delivered promising results for vision and auditory sensors. These methods focus on mimicking the neuro-biological architecture to generate and process spike-based information with minimal power consumption. With increasing interest in developing low-power and robust chemical sensors, the application of neuromorphic engineering concepts for electronic noses has provided an impetus for research focusing on improving these instruments. While conventional e-noses apply computationally expensive and power-consuming data-processing strategies, neuromorphic olfactory sensors implement the biological olfaction principles found in humans and insects to simplify the handling of multivariate sensory data by generating and processing spike-based information. Over the last decade, research on neuromorphic olfaction has established the capability of these sensors to tackle problems that plague the current e-nose implementations such as drift, response time, portability, power consumption and size. This article brings together the key contributions in neuromorphic olfaction and identifies future research directions to develop near-real-time olfactory sensors that can be implemented for a range of applications such as biosecurity and environmental monitoring. Furthermore, we aim to expose the computational parallels between neuromorphic olfaction and gustation for future research focusing on the correlation of these senses

Dynamic Temperature Modulation Sensing Technique of Electronic Nose: A Review

Electronic nose (E-nose) is a simulation of human nose, which consists of a gas sensor array and an artificial intelligent algorithm. The gas sensing properties of semiconductor sensors are affected by the heating temperature. For most gases, there exists the optimum oxidation temperature. If sensor response is recorded, we can obtain the data with abundant information at different working temperatures. The selectivity and sensitivity of a gas sensor array are the bottleneck of its development. Dynamic temperature modulation sensing technique is a use of semiconductor sensor temperature modulation characteristics by modulating its heating voltage to realize the heating temperature in a range of changes, people can record the corresponding response. The temperature modulation sensing technique can effectively improve the sensitivity of E-nose and realize the detection of low concentration gas, so it is of great practical significance to development technique of E-nose, which is based on temperature modulated sensing system for promoting the detection speed. But so far, the technique is only used for the detection of several common gases (such as methanol, ethanol, carbon monoxide, et al). The aim of this review is to supply a summary of the development and significant achievements of dynamic temperature modulation sensing technique used in E-nose in recent years. We are also looking forward to seeing dynamic temperature modulation sensing technique to accomplish more breakthroughs and get more achievements

Bioinspired early detection through gas flow modulation in chemo-sensory systems

The design of bioinspired systems for chemical sensing is an engaging line of research in machine olfaction. Developments in this line could increase the lifetime and sensitivity of artificial chemo-sensory systems. Such approach is based on the sensory systems known in live organisms, and the resulting developed artificial systems are targeted to reproduce the biological mechanisms to some extent. Sniffing behaviour, sampling odours actively, has been studied recently in neuroscience, and it has been suggested that the respiration frequency is an important parameter of the olfactory system, since the odour perception, especially in complex scenarios such as novel odourants exploration, depends on both the stimulus identity and the sampling method. In this work we propose a chemical sensing system based on an array of 16 metal-oxide gas sensors that we combined with an external mechanical ventilator to simulate the biological respiration cycle. The tested gas classes formed a relatively broad combination of two analytes, acetone and ethanol, in binary mixtures. Two sets of low-frequency and high-frequency features were extracted from the acquired signals to show that the high-frequency features contain information related to the gas class. In addition, such information is available at early stages of the measurement, which could make the technique suitable in early detection scenarios. The full data set is made publicly available to the community. (C) 2014 Elsevier B.V. All rights reserved.Postprint (author's final draft

Bioinspired Early Detection through gas flow modulation in chemo-sensory systems

The design of bioinspired systems for chemical sensing is an engaging line of research in machine olfaction. Developments in this line could increase the lifetime and sensitivity of artificial chemo-sensory systems. Such approach is based on the sensory systems known in live organisms, and the resulting developed artificial systems are targeted to reproduce the biological mechanisms to some extent. Sniffing behaviour, sampling odours actively, has been studied recently in neuroscience, and it has been suggested that the respiration frequency is an important parameter of the olfactory system, since the odour perception, especially in complex scenarios such as novel odourants exploration, depends on both the stimulus identity and the sampling method. In this work we propose a chemical sensing system based on an array of 16 metal-oxide gas sensors that we combined with an external mechanical ventilator to simulate the biological respiration cycle. The tested gas classes formed a relatively broad combination of two analytes, acetone and ethanol, in binary mixtures. Two sets of low-frequency and high-frequency features were extracted from the acquired signals to show that the high-frequency features contain information related to the gas class. In addition, such information is available at early stages of the measurement, which could make the technique suitable in early detection scenarios. The full data set is made publicly available to the community

Signal and data processing for machine olfaction and chemical sensing: A review

Signal and data processing are essential elements in electronic noses as well as in most chemical sensing instruments. The multivariate responses obtained by chemical sensor arrays require signal and data processing to carry out the fundamental tasks of odor identification (classification), concentration estimation (regression), and grouping of similar odors (clustering). In the last decade, important advances have shown that proper processing can improve the robustness of the instruments against diverse perturbations, namely, environmental variables, background changes, drift, etc. This article reviews the advances made in recent years in signal and data processing for machine olfaction and chemical sensing

Interfacing of neuromorphic vision, auditory and olfactory sensors with digital neuromorphic circuits

The conventional Von Neumann architecture imposes strict constraints on the development of intelligent adaptive systems. The requirements of substantial computing power to process and analyse complex data make such an approach impractical to be used in implementing smart systems. Neuromorphic engineering has produced promising results in applications such as electronic sensing, networking architectures and complex data processing. This interdisciplinary field takes inspiration from neurobiological architecture and emulates these characteristics using analogue Very Large Scale Integration (VLSI). The unconventional approach of exploiting the non-linear current characteristics of transistors has aided in the development of low-power adaptive systems that can be implemented in intelligent systems. The neuromorphic approach is widely applied in electronic sensing, particularly in vision, auditory, tactile and olfactory sensors. While conventional sensors generate a huge amount of redundant output data, neuromorphic sensors implement the biological concept of spike-based output to generate sparse output data that corresponds to a certain sensing event. The operation principle applied in these sensors supports reduced power consumption with operating efficiency comparable to conventional sensors. Although neuromorphic sensors such as Dynamic Vision Sensor (DVS), Dynamic and Active pixel Vision Sensor (DAVIS) and AEREAR2 are steadily expanding their scope of application in real-world systems, the lack of spike-based data processing algorithms and complex interfacing methods restricts its applications in low-cost standalone autonomous systems. This research addresses the issue of interfacing between neuromorphic sensors and digital neuromorphic circuits. Current interfacing methods of these sensors are dependent on computers for output data processing. This approach restricts the portability of these sensors, limits their application in a standalone system and increases the overall cost of such systems. The proposed methodology simplifies the interfacing of these sensors with digital neuromorphic processors by utilizing AER communication protocols and neuromorphic hardware developed under the Convolution AER Vision Architecture for Real-time (CAVIAR) project. The proposed interface is simulated using a JAVA model that emulates a typical spikebased output of a neuromorphic sensor, in this case an olfactory sensor, and functions that process this data based on supervised learning. The successful implementation of this simulation suggests that the methodology is a practical solution and can be implemented in hardware. The JAVA simulation is compared to a similar model developed in Nengo, a standard large-scale neural simulation tool. The successful completion of this research contributes towards expanding the scope of application of neuromorphic sensors in standalone intelligent systems. The easy interfacing method proposed in this thesis promotes the portability of these sensors by eliminating the dependency on computers for output data processing. The inclusion of neuromorphic Field Programmable Gate Array (FPGA) board allows reconfiguration and deployment of learning algorithms to implement adaptable systems. These low-power systems can be widely applied in biosecurity and environmental monitoring. With this thesis, we suggest directions for future research in neuromorphic standalone systems based on neuromorphic olfaction

Non-linear Machine Learning with Active Sampling for MOX Drift Compensation

Abstract—Metal oxide (MOX) gas detectors based on SnO2 provide low-cost solutions for real-time sensing of complex gas mixtures for indoor ambient monitoring. With high sensitivity under ideal conditions, MOX detectors may have poor longterm response accuracy due to environmental factors (humidity and temperature) along with sensor aging, leading to calibration drifts. Finding a simple and efficient solution to correct such calibration drifts has been the subject of numerous studies but remains an open problem. In this work, we present an efficient approach to MOX calibration using active and transfer sampling techniques coupled with non-linear machine learning algorithms, namely neural networks, extreme gradient boosting (XGBoost) and radial kernel support vector machines (SVM). Applied on the UCI’s HT detectors dataset, the study evaluates methods for active sampling, makes an assessment of suitable neural networks architectures and compares the performance of neural networks, XGBoost and radial kernel SVM to classify gas mixtures (banana and wine odours, clean air) in the presence of humidity and temperature changes. The results show high classification accuracy levels (above 90%) and confirm that active sampling can provide a suitable solution. Index Terms—Neural Networks, Extreme Gradient Boosting, XGBoost, Support Vector Machines, Non-Linear Learning Methods, Machine Learnin

A review of current neuromorphic approaches for vision, auditory, and olfactory sensors

Conventional vision, auditory, and olfactory sensors generate large volumes of redundant data and as a result tend to consume excessive power. To address these shortcomings, neuromorphic sensors have been developed. These sensors mimic the neuro-biological architecture of sensory organs using aVLSI (analog Very Large Scale Integration) and generate asynchronous spiking output that represents sensing information in ways that are similar to neural signals. This allows for much lower power consumption due to an ability to extract useful sensory information from sparse captured data. The foundation for research in neuromorphic sensors was laid more than two decades ago, but recent developments in understanding of biological sensing and advanced electronics, have stimulated research on sophisticated neuromorphic sensors that provide numerous advantages over conventional sensors. In this paper, we review the current state-of-the-art in neuromorphic implementation of vision, auditory, and olfactory sensors and identify key contributions across these fields. Bringing together these key contributions we suggest a future research direction for further development of the neuromorphic sensing field

Energetically deposited tin oxide: characterization and device applications

Semiconductor oxides are promising materials that have made impressive progress in recent years, challenging the dominance of silicon not only in conventional devices including field-effect transistors but being amenable to next-generation electronic devices such as memristors. Although a variety of oxides have been explored, tin oxide has been an interesting material for researchers when offering p-type characteristics of tin monoxide SnO and n-type characteristics in tin dioxide SnO2. While SnO2 is easy to grow and well suited for a wide range of applications, it is difficult to form p-type SnO due to its metastability where it forms into the more stable phase SnO2. The work presented in this Doctoral Dissertation focus on exploring the characteristics and applications of energetically deposited tin oxide thin films. The tin oxide film deposited using high-power impulse magnetron sputtering was found to be mixed-phase nanocrystalline SnO and SnO2 in which SnO2 is dominant. The high resistivity, low carrier concentration and low mobility in the as-deposited and annealed samples hindered the application of the high-power impulse magnetron sputtering (HiPIMS) SnOx in thin film transistors, however, suggested suitability for these films as a memristive material. A small but quantifiable variation in film stoichiometry (Sn:O) resulting from the off-axis deposition led to the formation of two different types of memristive devices, namely filamentary and nanoparticle network memristors. Both devices exhibited stable volatile bidirectional resistive switching with a ratio between high resistance and low resistance of more than two orders of magnitude. However, their underlying resistive switching mechanisms and device characteristics were significantly different. Synaptic-like behaviours were observed on both filamentary devices (FDs) and nanoparticle network devices (NNDs), highlighting their potential for information processing in neuromorphic computing systems. While a FD can become only an individual cell in reservoir computing circuits, an NND can be implemented as a reservoir due to their available inter-connectivity which is required for reservoir computing

Bio-Templating: An Emerging Synthetic Technique for Catalysts. A Review

In the last few years, researchers have focused their attention on the synthesis of new catalyst structures based on or inspired by nature. Biotemplating involves the transfer of biological structures to inorganic materials through artificial mineralization processes. This approach offers the main advantage of allowing morphological control of the product, as a template with the desired morphology can be pre-determined, as long as it is found in nature. This way, natural evolution through millions of years can provide us with new synthetic pathways to develop some novel functional materials with advantageous properties, such as sophistication, miniaturization, hybridization, hierarchical organization, resistance, and adaptability to the required need. The field of application of these materials is very wide, covering nanomedicine, energy capture and storage, sensors, biocompatible materials, adsorbents, and catalysis. In the latter case, bio-inspired materials can be applied as catalysts requiring different types of active sites (i.e., redox, acidic, basic sites, or a combination of them) to a wide range of processes, including conventional thermal catalysis, photocatalysis, or electrocatalysis, among others. This review aims to cover current experimental studies in the field of biotemplating materials synthesis and their characterization, focusing on their application in heterogeneous catalysis