349 research outputs found
Comprehensive Mapping and Benchmarking of Esaki Diode Performance
The tunneling-FET (TFET) has been identified as a prospective MOSFET replacement technology with the potential to extend geometric and electrostatic scaling of digital integrated circuits. However, experimental demonstrations of the TFET have yet to reliably achieve drive currents necessary to power large scale integrated circuits. Consequentially, much effort has gone into optimizing the band-to-band tunneling (BTBT) efficiency of the TFET. In this work, the Esaki tunnel diode (ETD) is used as a short loop element to map and optimize BTBT performance for a large design space. The experimental results and tools developed for this work may be used to (1) map additional and more complicated ETD structures, (2) guide development of improved TFET structures and BTBT devices, (3) design ETDs targeted BTBT characteristics, and (4) calibrate BTBT models. The first objective was to verify the quality of monolithically integrated III-V based ETDs on Si substrates (the industry standard). Five separate GaAs/InGaAs ETDs were fabricated on GaAs-virtual substrates via aspect ratio trapping, along with two companion ETDs grown on Si and GaAs bulk substrates. The quality of the virtual substrates and BTBT were verified with (i) very large peak-valley current ratios (up to 56), (ii) temperature measurements, and (iii) deep sub-micron scaling. The second objective mapped the BTBT characteristics of the In1-xGaxAs ternary system by (1) standardizing the ETD structure, (2) limiting experimental work to unstrained (i) GaAs, (ii) In0.53Ga0.47As, and (iii) InAs homojunctions, and (3) systematically varying doping concentrations. Characteristic BTBT trendlines were determined for each material system, ranging from ultra-low to ultra-high peak current densities (JP) of 11 μA/cm2 to 975 kA/cm2 for GaAs and In0.53Ga0.47As, respectively. Furthermore, the BTBT mapping results establishes that BTBT current densities can only be improved by ~2-3 times the current record, by increasing doping concentration and In content up to ~75%. The E. O. Kane BTBT model has been shown to accurately predict the tunneling characteristics for the entire design space. Furthermore, it was used to help guide the development of a new universal BTBT model, which is a closed form exponential using 2 fitting parameters, material constants, and doping concentrations. With it, JP can quickly be predicted over the entire design space of this work
The integration of Si-based resonant interband
eports the first demonstration of the integration of CMOS and Si/SiGe resonant interband tunnel diode (RITD). In Si-based material, recent breakthrough in Si/SiGe RITD grown using molecular beam epitaxy (MBE) made the integration with CMOS possible. The resultant devices enabled the realization of RITD CMOS circuitry, and a NMOS-RITD MOBILE latch was demonstrated in Si, all enabling digital and ternary circuit design for density storag
Simulation and Modeling of Novel Electronic Device Architectures with NESS (Nano-Electronic Simulation Software): A Modular Nano TCAD Simulation Framework
The modeling of nano-electronic devices is a cost-effective approach for optimizing the
semiconductor device performance and for guiding the fabrication technology. In this paper, we
present the capabilities of the new flexible multi-scale nano TCAD simulation software called NanoElectronic Simulation Software (NESS). NESS is designed to study the charge transport in contemporary and novel ultra-scaled semiconductor devices. In order to simulate the charge transport in
such ultra-scaled devices with complex architectures and design, we have developed numerous
simulation modules based on various simulation approaches. Currently, NESS contains a driftdiffusion, Kubo–Greenwood, and non-equilibrium Green’s function (NEGF) modules. All modules
are numerical solvers which are implemented in the C++ programming language, and all of them
are linked and solved self-consistently with the Poisson equation. Here, we have deployed some of
those modules to showcase the capabilities of NESS to simulate advanced nano-scale semiconductor
devices. The devices simulated in this paper are chosen to represent the current state-of-the-art and
future technologies where quantum mechanical effects play an important role. Our examples include
ultra-scaled nanowire transistors, tunnel transistors, resonant tunneling diodes, and negative capacitance transistors. Our results show that NESS is a robust, fast, and reliable simulation platform which
can accurately predict and describe the underlying physics in novel ultra-scaled electronic devices.European Union Horizon 2020 - 688101 SUPERAID7EPSRC UKRI Innovation Fellowship - EP/S001131/1 (QSEE), No.
EP/P009972/1 (QUANTDEVMOD)H2020-FETOPEN-2019 s-
No.862539-Electromed-FET OPEN.No. EP/S000259/1(Variability PDK for design based research on FPGA/neuro computing
Design and Modelling of Tunnel Field Effect Transistor- using TCAD Modeling
The purpose of this research was to suggest a junction-less strategy for a vertical Tunnel Field Effect Transistor, which would increase the device's efficiency. In this study, we examine the similarities and differences between a negative capacitor TFET and a vertically generated TFET with a source pocket and a heterostructure-based nanowire gate. And how the channel transit impacts the output qualities of a sub-100 nanometer sized device. The Silvaco TCAD (a commercially available tool) was used to simulate a tri-layer high-K dielectric made of hafnium zirconium oxide (HZO) and titanium dioxide (TiO2) materials as gate stacking to the V-TFET and GAA-NC-TFET structures, and the tunnelling and transport parameters were calibrated experimentally. A short bandgap material, GaSb, in the home region to enhance carrier tunnelling via the mentioned three source (GaSb)-channel (Si) heterojunction at varying biases were utilized. Motion, tube length, and saturating velocity are only few of the transport channel characteristics that are investigated. As a result of the building's vertical orientation, the electric field is enhanced, allowing for an ION current of up to 104 Am2. The most unexpected result of this device is that a high ION/IOFF may increase mobility and reduce saturation velocity, perhaps reducing the drain voltage at saturation. The proposed biosensor's sensitivity was multiplied by 108 when vertical and lateral tunnelling were used in tandem. We apply a variety of optimisation strategies to deal with this problem, despite the fact that quantum confinement reduces the effect of mobility variations on device performance. When biomolecules were positively charged, the drain current increased, and when they were negatively charged, the drain current decreased
Silicon Nanodevices
This book is a collection of scientific articles which brings research in Si nanodevices, device processing, and materials. The content is oriented to optoelectronics with a core in electronics and photonics. The issue of current technology developments in the nanodevices towards 3D integration and an emerging of the electronics and photonics as an ultimate goal in nanotechnology in the future is presented. The book contains a few review articles to update the knowledge in Si-based devices and followed by processing of advanced nano-scale transistors. Furthermore, material growth and manufacturing of several types of devices are presented. The subjects are carefully chosen to critically cover the scientific issues for scientists and doctoral students
Compact DC Modeling of Tunnel-FETs
En l'última dècada, el transistor d'efecte de camp amb efecte túnel (TFET) ha guanyat molt interès i es maneja com un possible successor de la tecnologia MOSFET convencional. El transport de càrrega en un TFET es basa en el mecanisme de túnel de banda a banda (B2B) i, per tant, el pendent sub-llindar a temperatura ambient pot superar el límit de 60 mV / dec.
Per descriure i analitzar el comportament del TFET en les simulacions de circuits, aquesta dissertació introdueix un model compacte de CC per TFET de doble comporta. L'enfocament de modelatge considera l'efecte túnel B2B amb l'efecte parasitari del corrent túnel assistida per trampes (TAT) en l'estat ON i ambipolar del TFET. Inclou un paquet d'equacions compactes per al potencial 2D per descriure el diagrama de banda del TFET. Basat en el diagrama de banda, el B2B i el corrent TAT es deriven per separat. Per fer-ho, primer es troba una expressió compacta per la llargada túnel, que després s'utilitza juntament amb un enfocament numèric robust de tipus Wentzel-Kramers-Brillouin (WKB) per calcular la probabilitat túnel. Després, usant l'equació de túnel de Landauer, la taxa de generació túnel es calcula i s'aproxima per arribar a una expressió de forma tancada per a la densitat de corrent. Amb una aproximació addicional de la densitat de corrent utilitzant una funció matemàtica, s'aconsegueixen expressions compactes per al túnel B2B resultant i el corrent TAT.
La verificació del model es realitza amb l'ajuda de les dades de simulació TCAD Sentaurus per diverses configuracions de simulació. A més, la validesa del model es demostra mitjançant mesuraments de TFET complementaris fabricats. Per demostrar l'estabilitat numèrica i la continuïtat, així com la flexibilitat, es realitzen i analitzen simulacions de circuits lògics basats en TFET com un inversor d'una sola etapa o una cel·la SRAM. La combinació del model CC amb un model TFET AC permet una simulació transitòria d'un oscil·lador en anell de 11 etapes.En la última década, el transistor de efecto de campo con efecto túnel (TFET) ha ganado mucho interés y se maneja como un posible sucesor de la tecnología MOSFET convencional. El transporte de carga en un TFET se basa en el mecanismo de túnel de banda a banda (B2B) y, por lo tanto, la pendiente sub-umbral a temperatura ambiente puede superar el límite de 60 mV / dec.
Para describir y analizar el comportamiento del TFET en las simulaciones de circuitos, esta disertación introduce un modelo compacto de CC para TFET de doble compuerta. El enfoque de modelado considera el efecto túnel B2B con el efecto parasitario de la corriente túnel asistida por trampas (TAT) en el estado ON y AMBIPOLAR del TFET. Incluye un paquete de ecuaciones compactas del potencial 2D para describir el diagrama de banda del TFET. Basado en el diagrama de banda, el B2B y la corriente TAT se derivan por separado. Para hacerlo, primero se encuentra una expresión compacta para la longitud túnel, que luego se utiliza junto con un enfoque numérico robusto de tipo Wentzel-Kramers-Brillouin (WKB) para calcular la probabilidad túnel. Luego, usando la ecuación de túnel de Landauer, la tasa de generación túnel se calcula y aproxima para llegar a una expresión de forma cerrada para la densidad de corriente. Con una aproximación adicional de la densidad de corriente por una función matemática, se logran expresiones compactas para el túnel B2B resultante y la corriente TAT.
La verificación del modelo se realiza con la ayuda de los datos de simulación TCAD Sentaurus para varias configuraciones de simulación. Además, la validez del modelo se demuestra mediante mediciones de TFET complementarios fabricados. Para demostrar la estabilidad numérica y la continuidad, así como la flexibilidad, se realizan y analizan simulaciones de circuitos lógicos basados en TFET como un inversor de una sola etapa o una celda SRAM. La combinación del modelo CC con un modelo TFET AC permite una simulación transitoria de un oscilador en anillo de 11 etapas.In the last decade, the tunnel field-effect transistor (TFET) has gained a lot of interest and is handled as a possible successor of the conventional MOSFET technology. The current transport of a TFET is based on the band-to-band (B2B) tunneling mechanism and therefore, the subthreshold slope at room temperature can overcome the limit of 60 mV/dec.
In order to describe and analyze the TFET behavior in circuit simulations, this dissertation introduces a compact DC model for double-gate TFETs. The modeling approach considers the B2B tunneling and the parasitic effect of trap-assisted tunneling (TAT) in the ON- and AMBIPOLAR-state of the TFET. It includes a 2D compact potential equation package to de-scribe the band diagram of the TFET. Based on the band diagram, the B2B tunneling and TAT current part are derived separately. In order to do so, firstly a compact expression for the tunneling length is found, which is then used together with a numerical robust Wentzel-Kramers-Brillouin (WKB) approach to calculate the tunneling probability. Afterwards, using Landauer’s tunneling equation, the tunneling generation rate is calculated and approximated to come to a closed-form expression for the current density. Further approximation of the current density by a mathematical function, compact expressions for the resulting B2B tun-neling and TAT current are achieved.
The verification of the model is done with the help of TCAD Sentaurus simulation data for various simulation setups. Furthermore, the validity of the model is proven by measurements of fabricated complementary TFETs. In order to demonstrate the numerical stability and continuity as well as the flexibility, simulations of TFET-based logic circuits like a single-stage inverter or an SRAM cell are performed and analyzed. The combination of the DC model with an TFET AC model allows for a transient simulation of an 11-stage ring oscillator
High-Performance Silicon Nanowire Electronics
This thesis explores 10-nm wide Si nanowire (SiNW) field-effect transistors (FETs) for logic applications via the fabrication and testing of SiNW-based ring oscillators. Both SiNW surface treatments and dielectric annealing are reported for producing SiNW FETs that exhibit high performance in terms of large on/off-state current ratio (~108), low drain-induced barrier lowering (~30 mV), high carrier mobilities (~269 cm2/V•s), and low subthreshold swing (~80 mV/dec). The performance of inverter and ring-oscillator circuits fabricated from these nanowire FETs is explored as well. The inverter demonstrates the highest voltage gain (~148) reported for a SiNW-based NOT gate, and the ring oscillator exhibits near rail-to-rail oscillation centered at 13.4 MHz. The static and dynamic characteristics of these NW devices indicate that these SiNW-based FET circuits are excellent candidates for various high-performance nanoelectronic applications.
A set of novel charge-trap non-volatile memory devices based on high-performance SiNW FETs are well investigated. These memory devices integrate Fe2O3 quantum dots (FeO QDs) as charge storage elements. A template-assisted assembly technique is used to align FeO QDs into a close-packed, ordered matrix within the trenches that separate highly aligned SiNWs, and thus store injected charges. A Fowler-Nordheim tunneling mechanism describes both the program and erase operations. The memory prototype demonstrates promising characteristics in terms of large threshold voltage shift (~1.3 V) and long data retention time (~3 × 106 s), and also allows for key components to be systematically varied. For example, varying the size of the QDs indicates that larger diameter QDs exhibit a larger memory window, suggesting the QD charging energy plays an important role in the carrier transport. The device temperature characteristics reveal an optimal window for device performance between 275K and 350K.
The flexibility of integrating the charge-trap memory devices with the SiNW logic devices offers a low-cost embedded non-volatile memory solution. A building block for a SiNW-based field-programmable gate array (FPGA) is proposed in the future work.</p
Compact DC Modeling of Tunnel-FETs
En l'última dècada, el transistor d'efecte de camp amb efecte túnel (TFET) ha guanyat molt interès i es maneja com un possible successor de la tecnologia MOSFET convencional. El transport de càrrega en un TFET es basa en el mecanisme de túnel de banda a banda (B2B) i, per tant, el pendent sub-llindar a temperatura ambient pot superar el límit de 60 mV / dec.
Per descriure i analitzar el comportament del TFET en les simulacions de circuits, aquesta dissertació introdueix un model compacte de CC per TFET de doble comporta. L'enfocament de modelatge considera l'efecte túnel B2B amb l'efecte parasitari del corrent túnel assistida per trampes (TAT) en l'estat ON i ambipolar del TFET. Inclou un paquet d'equacions compactes per al potencial 2D per descriure el diagrama de banda del TFET. Basat en el diagrama de banda, el B2B i el corrent TAT es deriven per separat. Per fer-ho, primer es troba una expressió compacta per la llargada túnel, que després s'utilitza juntament amb un enfocament numèric robust de tipus Wentzel-Kramers-Brillouin (WKB) per calcular la probabilitat túnel. Després, usant l'equació de túnel de Landauer, la taxa de generació túnel es calcula i s'aproxima per arribar a una expressió de forma tancada per a la densitat de corrent. Amb una aproximació addicional de la densitat de corrent utilitzant una funció matemàtica, s'aconsegueixen expressions compactes per al túnel B2B resultant i el corrent TAT.
La verificació del model es realitza amb l'ajuda de les dades de simulació TCAD Sentaurus per diverses configuracions de simulació. A més, la validesa del model es demostra mitjançant mesuraments de TFET complementaris fabricats. Per demostrar l'estabilitat numèrica i la continuïtat, així com la flexibilitat, es realitzen i analitzen simulacions de circuits lògics basats en TFET com un inversor d'una sola etapa o una cel·la SRAM. La combinació del model CC amb un model TFET AC permet una simulació transitòria d'un oscil·lador en anell de 11 etapes.En la última década, el transistor de efecto de campo con efecto túnel (TFET) ha ganado mucho interés y se maneja como un posible sucesor de la tecnología MOSFET convencional. El transporte de carga en un TFET se basa en el mecanismo de túnel de banda a banda (B2B) y, por lo tanto, la pendiente sub-umbral a temperatura ambiente puede superar el límite de 60 mV / dec.
Para describir y analizar el comportamiento del TFET en las simulaciones de circuitos, esta disertación introduce un modelo compacto de CC para TFET de doble compuerta. El enfoque de modelado considera el efecto túnel B2B con el efecto parasitario de la corriente túnel asistida por trampas (TAT) en el estado ON y AMBIPOLAR del TFET. Incluye un paquete de ecuaciones compactas del potencial 2D para describir el diagrama de banda del TFET. Basado en el diagrama de banda, el B2B y la corriente TAT se derivan por separado. Para hacerlo, primero se encuentra una expresión compacta para la longitud túnel, que luego se utiliza junto con un enfoque numérico robusto de tipo Wentzel-Kramers-Brillouin (WKB) para calcular la probabilidad túnel. Luego, usando la ecuación de túnel de Landauer, la tasa de generación túnel se calcula y aproxima para llegar a una expresión de forma cerrada para la densidad de corriente. Con una aproximación adicional de la densidad de corriente por una función matemática, se logran expresiones compactas para el túnel B2B resultante y la corriente TAT.
La verificación del modelo se realiza con la ayuda de los datos de simulación TCAD Sentaurus para varias configuraciones de simulación. Además, la validez del modelo se demuestra mediante mediciones de TFET complementarios fabricados. Para demostrar la estabilidad numérica y la continuidad, así como la flexibilidad, se realizan y analizan simulaciones de circuitos lógicos basados en TFET como un inversor de una sola etapa o una celda SRAM. La combinación del modelo CC con un modelo TFET AC permite una simulación transitoria de un oscilador en anillo de 11 etapas.In the last decade, the tunnel field-effect transistor (TFET) has gained a lot of interest and is handled as a possible successor of the conventional MOSFET technology. The current transport of a TFET is based on the band-to-band (B2B) tunneling mechanism and therefore, the subthreshold slope at room temperature can overcome the limit of 60 mV/dec.
In order to describe and analyze the TFET behavior in circuit simulations, this dissertation introduces a compact DC model for double-gate TFETs. The modeling approach considers the B2B tunneling and the parasitic effect of trap-assisted tunneling (TAT) in the ON- and AMBIPOLAR-state of the TFET. It includes a 2D compact potential equation package to de-scribe the band diagram of the TFET. Based on the band diagram, the B2B tunneling and TAT current part are derived separately. In order to do so, firstly a compact expression for the tunneling length is found, which is then used together with a numerical robust Wentzel-Kramers-Brillouin (WKB) approach to calculate the tunneling probability. Afterwards, using Landauer’s tunneling equation, the tunneling generation rate is calculated and approximated to come to a closed-form expression for the current density. Further approximation of the current density by a mathematical function, compact expressions for the resulting B2B tun-neling and TAT current are achieved.
The verification of the model is done with the help of TCAD Sentaurus simulation data for various simulation setups. Furthermore, the validity of the model is proven by measurements of fabricated complementary TFETs. In order to demonstrate the numerical stability and continuity as well as the flexibility, simulations of TFET-based logic circuits like a single-stage inverter or an SRAM cell are performed and analyzed. The combination of the DC model with an TFET AC model allows for a transient simulation of an 11-stage ring oscillator
Numerical simulation of advanced CMOS and beyond CMOS devices
Co-supervisore: Marco PalaopenLo scaling dei dispositivi elettronici e l'introduzione di nuove opzioni tecnologiche per l'aumento delle prestazioni richiede un costante supporto dal punto di vista della simulazione numerica. Questa tesi si inquadra in tale ambito ed in particolare si prefigge lo scopo di sviluppare due tool software completi basati su tecniche avanzate al fine di predire le prestazioni di dipositivi nano-elettronici progettati per i futuri nodi tecnologiciDottorato di ricerca in Ingegneria industriale e dell'informazioneembargoed_20131103Conzatti, Francesc
Boundary layer flow and heat transfer over a permeable shrinking sheet with partial slip
The steady, laminar flow of an incompressible viscous fluid over a shrinking permeable sheet
is investigated. The governing partial differential equations are transformed into ordinary differential
equations using similarity transformation, before being solved numerically by the shooting method. The
features of the flow and heat transfer characteristics for different values of the slip parameter and Prandtl
number are analyzed and discussed. The results indicate that both the skin friction coefficient and the heat
transfer rate at the surface increase as the slip parameter increases
- …