264 research outputs found

    Clues from joint inversion of tsunami and geodetic data of the 2011 Tohoku-oki earthquake

    Get PDF
    The 2011 Tohoku-oki (Mw 9.1) earthquake is so far the best-observed megathrust rupture, which allowed the collection of unprecedented offshore data. The joint inversion of tsunami waveforms (DART buoys, bottom pressure sensors, coastal wave gauges, and GPS-buoys) and static geodetic data (onshore GPS, seafloor displacements obtained by a GPS/acoustic combination technique), allows us to retrieve the slip distribution on a non-planar fault. We show that the inclusion of near-source data is necessary to image the details of slip pattern (maximum slip ~48 m, up to ~35 m close to the Japan trench), which generated the large and shallow seafloor coseismic deformations and the devastating inundation of the Japanese coast. We investigate the relation between the spatial distribution of previously inferred interseismic coupling and coseismic slip and we highlight the importance of seafloor geodetic measurements to constrain the interseismic coupling, which is one of the key-elements for long-term earthquake and tsunami hazard assessment

    Depth-varying rupture properties of subduction zone megathrust faults

    Get PDF
    Subduction zone plate boundary megathrust faults accommodate relative plate motions with spatially varying sliding behavior. The 2004 Sumatra-Andaman (M_w 9.2), 2010 Chile (Mw 8.8), and 2011 Tohoku (M_w 9.0) great earthquakes had similar depth variations in seismic wave radiation across their wide rupture zones – coherent teleseismic short-period radiation preferentially emanated from the deeper portion of the megathrusts whereas the largest fault displacements occurred at shallower depths but produced relatively little coherent short-period radiation. We represent these and other depth-varying seismic characteristics with four distinct failure domains extending along the megathrust from the trench to the downdip edge of the seismogenic zone. We designate the portion of the megathrust less than 15 km below the ocean surface as domain A, the region of tsunami earthquakes. From 15 to ∼35 km deep, large earthquake displacements occur over large-scale regions with only modest coherent short-period radiation, in what we designate as domain B. Rupture of smaller isolated megathrust patches dominate in domain C, which extends from ∼35 to 55 km deep. These isolated patches produce bursts of coherent short-period energy both in great ruptures and in smaller, sometimes repeating, moderate-size events. For the 2011 Tohoku earthquake, the sites of coherent teleseismic short-period radiation are close to areas where local strong ground motions originated. Domain D, found at depths of 30–45 km in subduction zones where relatively young oceanic lithosphere is being underthrust with shallow plate dip, is represented by the occurrence of low-frequency earthquakes, seismic tremor, and slow slip events in a transition zone to stable sliding or ductile flow below the seismogenic zone

    Detection and study of a high magnitude seismic event from GPS data: Case study of the 2011 Tohoku-Oki earthquake

    Get PDF
    The advent of GPS provided a new way of measuring surface displacements due to earthquakes by deploying GPS networks within active seismic areas. Japan is located in the confluence of several tectonic plates, hence its seismicity. In order to surveille this activity, one of wider GPS network in the world was deployed, i.e., GEONET. By processing data from 93 GEONET reference stations, we analyze the 2011 Tohoku-Oki earthquake using PPP strategy. We stu- died the time series during the event setting up a threshold value at we consider the time series are being altered by the earthquake. We also identified the time after the occurrence when the maximum displacements happen. With the study of these two parameters, we aim to show their different behavior as the main shock propagates along the Japan islands, with a focus on a better understanding of the earthquake and its propagation. To achieving this, a least square adjustment method was used to relate epicentral distance to topocentric displacements and the time of detection to epicentral distance. The results show an exponential behavior of the distance-displacement regression versus a linear behavior of the distance-time regression. Besides, we use the former linear regression to calculate and approximation of the velocity of the shock wave

    Near real-time determination of earthquake source parameters for tsunami early warning from geodetic observations

    Get PDF
    Exemplifying the tsunami source immediately after an earthquake is the most critical component of tsunami early warning, as not every earthquake generates a tsunami. After a major under sea earthquake, it is very important to determine whether or not it has actually triggered the deadly wave. The near real-time observations from near field networks such as strong motion and Global Positioning System (GPS) allows rapid determination of fault geometry. Here we present a complete processing chain of Indian Tsunami Early Warning System (ITEWS), starting from acquisition of geodetic raw data, processing, inversion and simulating the situation as it would be at warning center during any major earthquake. We determine the earthquake moment magnitude and generate the centroid moment tensor solution using a novel approach which are the key elements for tsunami early warning. Though the well established seismic monitoring network, numerical modeling and dissemination system are currently capable to provide tsunami warnings to most of the countries in and around the Indian Ocean, the study highlights the critical role of geodetic observations in determination of tsunami source for high-quality forecasting

    Source process with heterogeneous rupture velocity for the 2011 Tohoku-Oki earthquake based on 1-Hz GPS data

    Get PDF
    Additional file 2: Table S1. Velocity structure used for Green’s functions

    Long-period surface motion of the multi-patch Mw9.0 Tohoku-Oki earthquake

    Get PDF
    We show that it is possible to capture the oscillatory ground motion induced by the Tohoku-Oki event for periods ranging from 3 to 100s using Precise Point Positioning (PPP). We find that the ground motions of the sedimentary basins of Japan were large (respectively > 0.15m/s and >0.15m/s2 for velocity and acceleration) even for periods larger than 3s. We compare geodetic observables with a Ground Motion Prediction Equation (GMPE) designed for Japan seismicity and find that the Spectral Acceleration (SA) is well estimated for periods larger than 3s and distances ranging from 100 to 500km. At last, through the analysis of the displacement attenuation plots, we show that the 2011 Tohoku-Oki event is likely composed of multiple rupture patches as suggested before by time-reversal inversions of seismic data

    GPS Seismology for a moderate magnitude earthquake: Lessons learned from the analysis of the 31 October 2013 ML6.4 Ruisui (Taiwan) earthquake

    Get PDF
    The 31 October 2013 ML 6.4 Ruisui earthquake was well recorded by twelve 50-Hz, four 20-Hz and thirteen 1-Hz GPS receivers, and twenty-five strong motion stations located within the epicentral distance of 90 km in eastern Taiwan. Kinematic positioning solutions estimated by four GNSS software (TRACK, RTKLIB, GIPSY, VADASE) are used to derive the seismic waveforms and the co-seismic displacements for this event; strong motion accelerometers are used to verify the capability of high rate GPS to detect seismic waves generated by this earthquake. Results show that the coordinate repeatability of the GPS displacements time series are ~6 mm and ~20 mm standard deviation in the horizontal and vertical components respectively, after applying spatial filtering. The largest co-seismic displacement derived from high-rate GPS is nearly 15 centimeter at 5 km northeast of the epicenter. S waves and surface waves are successfully detected by motions of high-rate GPS and double-integrated accelerometers within the 15 km epicentral distance. For the first time twelve 50-Hz and four 20 Hz GPS observations for seismological study were used and analyzed in Taiwan; a clear benefit was evidenced with regard to the seismic waves features detection, with respect to the 1-Hz GPS data, so that ultra-high rate (> 1-Hz) observations can compensate the sparse coverage of seismic data, provided proper monuments for the GPS permanent stations are realized. Spectra analysis between co-located GPS and strong motion data further suggests that the optimal sampling rate for high-rate GPS Seismology study is 5 Hz. The 2013 Ruisui Taiwan earthquake recorded by the high-rate GPS permanent stations network in Taiwan demonstrates the benefits of GPS Seismology for a moderate size earthquake at a local scale
    corecore