165 research outputs found
Enhanced Location And Positioning In Wimax Networks With Virtual Mimo Base Station
Location and Positioning (L&P) techniques which utilize wireless broadband networks are often considered by the wireless communications industries to be a means for improving overall system performance and providing value added services. Conventional L&P methods rely on the availability of base station (BS) locations as well as the mitigation of propagation effects. It is known that location estimation accuracy suffers in poor geometric dilution of precision (GDOP) caused by BS location as conventional location algorithms generate large GDOP values which correspond to poor geometrical topology. In addition, non line of sight (NLOS) effects cause large errors in time of arrival (TOA) readings, which affecting mobile station (MS) estimation accuracy. In this thesis a new concept of virtual BS (VirBS) utilizing multiple input multiple output (MIMO) technology has been introduced and successfully applied to improve L&P accuracy. The performance of the proposed algorithm has been evaluated via computer simulations. The simulation results demonstrate that the proposed algorithm increased L&P accuracy without additional expenditure on network architecture. Furthermore, a new hybrid algorithm enhancement of mobile station (MS) location estimation by using a single MIMO base station (SMBS) with the virtual base station has been introduced. The SMBS algorithm with virtual base station utilizes both AOA and AOD measurement parameter (SMVirBS). The developed algorithm includes the effect of the geometric dilution of precision (GDOP) to assist with the location estimation accuracy. Simulation results show that the proposed technique outperforms the linear least square (LLS) algorithm in terms of estimated location accuracy
Performance Evaluation of Hyperbolic Position Location Technique in Cellular Wireless Networks
This study addresses the wireless geolocation problem that has been an attractive subject for the last few years after Federal Communications Commission (FCC) mandate for wireless service providers to locate emergency 911 users with a high degree of accuracy -within a radius of 125 meters, 67 percent of the time by October 2001. There are a number of different geolocation technologies that have been proposed. These include, Assisted GPS (A-GPS), network-based technologies such as Enhanced Observed Time Difference (E-OTD), Time Difference of Arrival (TDOA), Angle of Arrival (AOA), and Cell of Origin (COO). This research focuses on network based techniques, namely the more prominent TDOA which is also called hyperbolic position location technique. The main problem in time-based positioning systems is solving nonlinear hyperbolic equations derived from set of TDOA estimates. Two algorithms are implemented as a solution to this problem: A closed form solution and a Least Squares (LS) algorithm. Accuracy and computational efficiency performances are compared in a wireless system established using DGPS measurements in Dayton, OH area
Performance Limits and Geometric Properties of Array Localization
Location-aware networks are of great importance and interest in both civil
and military applications. This paper determines the localization accuracy of
an agent, which is equipped with an antenna array and localizes itself using
wireless measurements with anchor nodes, in a far-field environment. In view of
the Cram\'er-Rao bound, we first derive the localization information for static
scenarios and demonstrate that such information is a weighed sum of Fisher
information matrices from each anchor-antenna measurement pair. Each matrix can
be further decomposed into two parts: a distance part with intensity
proportional to the squared baseband effective bandwidth of the transmitted
signal and a direction part with intensity associated with the normalized
anchor-antenna visual angle. Moreover, in dynamic scenarios, we show that the
Doppler shift contributes additional direction information, with intensity
determined by the agent velocity and the root mean squared time duration of the
transmitted signal. In addition, two measures are proposed to evaluate the
localization performance of wireless networks with different anchor-agent and
array-antenna geometries, and both formulae and simulations are provided for
typical anchor deployments and antenna arrays.Comment: to appear in IEEE Transactions on Information Theor
Mobile node-aided localization and tracking in terrestrial and underwater networks
In large-scale wireless sensor networks (WSNs), the position information of individual
sensors is very important for many applications. Generally, there are a small number
of position-aware nodes, referred to as the anchors. Every other node can estimate its
distances to the surrounding anchors, and then employ trilateration or triangulation for
self-localization. Such a system is easy to implement, and thus popular for both terrestrial
and underwater applications, but it suffers from some major drawbacks. First, the density
of the anchors is generally very low due to economical considerations, leading to poor
localization accuracy. Secondly, the energy and bandwidth consumptions of such systems
are quite significant. Last but not the least, the scalability of a network based on fixed
anchors is not good. Therefore, whenever the network expands, more anchors should be
deployed to guarantee the required performance. Apart from these general challenges,
both terrestrial and underwater networks have their own specific ones. For example, realtime
channel parameters are generally required for localization in terrestrial WSNs. For
underwater networks, the clock skew between the target sensor and the anchors must
be considered. That is to say, time synchronization should be performed together with
localization, which makes the problem complicated.
An alternative approach is to employ mobile anchors to replace the fixed ones. For
terrestrial networks, commercial drones and unmanned aerial vehicles (UAVs) are very
good choices, while autonomous underwater vehicles (AUVs) can be used for underwater
applications. Mobile anchors can move along a predefined trajectory and broadcast beacon
signals. By listening to the messages, the other nodes in the network can localize themselves
passively. This architecture has three major advantages: first, energy and bandwidth consumptions can be significantly reduced; secondly, the localization accuracy can be much
improved with the increased number of virtual anchors, which can be boosted at negligible
cost; thirdly, the coverage can be easily extended, which makes the solution and the network
highly scalable.
Motivated by this idea, this thesis investigates the mobile node-aided localization and
tracking in large-scale WSNs. For both terrestrial and underwater WSNs, the system
design, modeling, and performance analyses will be presented for various applications,
including: (1) the drone-assisted localization in terrestrial networks; (2) the ToA-based
underwater localization and time synchronization; (3) the Doppler-based underwater localization;
(4) the underwater target detection and tracking based on the convolutional
neural network and the fractional Fourier transform. In these applications, different challenges
will present, and we will see how these challenges can be addressed by replacing
the fixed anchors with mobile ones. Detailed mathematical models will be presented, and
extensive simulation and experimental results will be provided to verify the theoretical
results. Also, we will investigate the channel estimation for the fifth generation (5G) wireless
communications. A pilot decontamination method will be presented for the massive
multiple-input-multiple-output communications, and the data-aided channel tracking will
be discussed for millimeter wave communications. We will see that the localization problem
is highly coupled with the channel estimation in wireless communications
- …