42 research outputs found
Effect of CMOS Technology Scaling on Fully-Integrated Power Supply Efficiency
International audienceIntegrating a power supply in the same die as the powered circuits is an appropriate solution for granular, fine and fast power management. To allow same-die co-integration, fully integrated DC-DC converters designed in the latest CMOS technologies have been greatly studied by academics and industrialists in the last decade. However, there is little study concerning the effects of the CMOS scaling on these particular circuits. To show the trends, this paper compares the achievable efficiencies of the 2:1 switched capacitor DC-DC converter topology under the same constraints in 65, 130 and 350nm bulk CMOS nodes and 28nm in bulk and FDSOI technologies with various capacitor options
Analysis of asynchronous routers for network-on-chip applications
Asynchronous circuit design has been conventionally regarded as a valid alternative to synchronous logic due to its potential for low consumption of resources, power and delay. This includes areas such as the communication infrastructure of modern multi core processors, the so-called Network-on-Chip (NoC) paradigm on which this thesis focus on. In recent times, the transistor downscaling and the increasing clock frequencies have pushed synchronous design to high static power and delay. As a result, the interest for asynchronous integrated routers and links has re-emerged, especially in fields with ultra-low power requirements such as embedded systems. In this thesis, we construct an asynchronous router using Verilog code based on architectures found in the literature. We analyze the functionality of each of the building blocks and verify the operation of the implemented routing algorithm and arbitration mechanism. In the future, the results obtained here are expected to enable a complete implementation of the router in Verilog and its posterior analysis of its scalability
Elastic bundles :modelling and architecting asynchronous circuits with granular rigidity
PhD ThesisIntegrated Circuit (IC) designs these days are predominantly System-on-Chips (SoCs).
The complexity of designing a SoC has increased rapidly over the years due to growing
process and environmental variations coupled with global clock distribution di culty.
Moreover, traditional synchronous design is not apt to handle the heterogeneous timing
nature of modern SoCs. As a countermeasure, the semiconductor industry witnessed
a strong revival of asynchronous design principles. A new paradigm of digital circuits
emerged, as a result, namely mixed synchronous-asynchronous circuits. With a wave
of recent innovations in synchronous-asynchronous CAD integration, this paradigm is
showing signs of commercial adoption in future SoCs mainly due to the scope for reuse
of synchronous functional blocks and IP cores, and the co-existence of synchronous and
asynchronous design styles in a common EDA framework.
However, there is a lack of formal methods and tools to facilitate mixed synchronousasynchronous
design. In this thesis, we propose a formal model based on Petri nets with
step semantics to describe these circuits behaviourally. Implication of this model in the
veri cation and synthesis of mixed synchronous-asynchronous circuits is studied. Till
date, this paradigm has been mainly explored on the basis of Globally Asynchronous
Locally Synchronous (GALS) systems. Despite decades of research, GALS design has
failed to gain traction commercially. To understand its drawbacks, a simulation framework
characterising the physical and functional aspects of GALS SoCs is presented.
A novel method for synthesising mixed synchronous-asynchronous circuits with varying
levels of rigidity is proposed. Starting with a high-level data ow model of a system which
is intrinsically asynchronous, the key idea is to introduce rigidity of chosen granularity
levels in the model without changing functional behaviour. The system is then partitioned
into functional blocks of synchronous and asynchronous elements before being transformed
into an equivalent circuit which can be synthesised using standard EDA tools
Exploration and Design of High Performance Variation Tolerant On-Chip Interconnects
Siirretty Doriast
Network simplicity for latency insensitive cores
Journal ArticleIn this paper we examine a latency insensitive net- work composed of very fast and simple circuits that connects SoC cores that are also latency insensitive, de-synchronized, or asynchronous. These types of cores provide native flow control that is compatible with this network, thus reducing adapter overhead and buffering needs by applying backpressure directly to the sending core. We show that under realistic traffic patterns our sample network meets performance requirements and uses less power compared to a similar design. This concept of a simplified network, along with latency insensitive cores lends itself well to meeting the needs of low-power interconnect components in future design processes
Sincronização em sistemas integrados a alta velocidade
Doutoramento em Engenharia ElectrotécnicaA distribui ção de um sinal relógio, com elevada precisão espacial (baixo
skew) e temporal (baixo jitter ), em sistemas sí ncronos de alta velocidade tem-se revelado uma tarefa cada vez mais demorada e complexa devido ao escalonamento da tecnologia. Com a diminuição das dimensões dos dispositivos
e a integração crescente de mais funcionalidades nos Circuitos Integrados (CIs), a precisão associada as transições do sinal de relógio tem sido cada vez mais afectada por varia ções de processo, tensão e temperatura.
Esta tese aborda o problema da incerteza de rel ogio em CIs de alta velocidade, com o objetivo de determinar os limites do paradigma de desenho sí ncrono.
Na prossecu ção deste objectivo principal, esta tese propõe quatro novos modelos de incerteza com âmbitos de aplicação diferentes. O primeiro modelo permite estimar a incerteza introduzida por um inversor est atico CMOS, com base em parâmetros simples e su cientemente gen éricos para que possa ser usado na previsão das limitações temporais de circuitos mais complexos, mesmo na fase inicial do projeto. O segundo modelo, permite
estimar a incerteza em repetidores com liga ções RC e assim otimizar o dimensionamento da rede de distribui ção de relógio, com baixo esfor ço computacional. O terceiro modelo permite estimar a acumula ção de incerteza em cascatas de repetidores. Uma vez que este modelo tem em considera ção a correla ção entre fontes de ruí do, e especialmente util para promover t ecnicas de distribui ção de rel ogio e de alimentação que possam minimizar a acumulação de incerteza. O quarto modelo permite estimar a incerteza temporal em sistemas com m ultiplos dom ínios de sincronismo.
Este modelo pode ser facilmente incorporado numa ferramenta autom atica
para determinar a melhor topologia para uma determinada aplicação ou para avaliar a tolerância do sistema ao ru ído de alimentação.
Finalmente, usando os modelos propostos, são discutidas as tendências da precisão de rel ogio. Conclui-se que os limites da precisão do rel ogio são, em ultima an alise, impostos por fontes de varia ção dinâmica que se preveem crescentes na actual l ogica de escalonamento dos dispositivos. Assim sendo,
esta tese defende a procura de solu ções em outros ní veis de abstração, que não apenas o ní vel f sico, que possam contribuir para o aumento de desempenho dos CIs e que tenham um menor impacto nos pressupostos do paradigma de desenho sí ncrono.Distributing a the clock simultaneously everywhere (low skew) and periodically
everywhere (low jitter) in high-performance Integrated Circuits (ICs)
has become an increasingly di cult and time-consuming task, due to technology
scaling. As transistor dimensions shrink and more functionality is
packed into an IC, clock precision becomes increasingly a ected by Process,
Voltage and Temperature (PVT) variations. This thesis addresses the
problem of clock uncertainty in high-performance ICs, in order to determine
the limits of the synchronous design paradigm.
In pursuit of this main goal, this thesis proposes four new uncertainty models,
with di erent underlying principles and scopes. The rst model targets
uncertainty in static CMOS inverters. The main advantage of this model
is that it depends only on parameters that can easily be obtained. Thus,
it can provide information on upcoming constraints very early in the design
stage. The second model addresses uncertainty in repeaters with RC interconnects,
allowing the designer to optimise the repeater's size and spacing,
for a given uncertainty budget, with low computational e ort. The third
model, can be used to predict jitter accumulation in cascaded repeaters, like
clock trees or delay lines. Because it takes into consideration correlations
among variability sources, it can also be useful to promote
oorplan-based
power and clock distribution design in order to minimise jitter accumulation.
A fourth model is proposed to analyse uncertainty in systems with multiple
synchronous domains. It can be easily incorporated in an automatic tool
to determine the best topology for a given application or to evaluate the
system's tolerance to power-supply noise.
Finally, using the proposed models, this thesis discusses clock precision
trends. Results show that limits in clock precision are ultimately imposed
by dynamic uncertainty, which is expected to continue increasing with technology
scaling. Therefore, it advocates the search for solutions at other
abstraction levels, and not only at the physical level, that may increase
system performance with a smaller impact on the assumptions behind the
synchronous design paradigm
RTL Design Quality Checks for Soft IPs
Soft IPs are architectural modules which are delivered in the form of synthesizable RTL level codes written in some HDL (hardware descriptive language) like Verilog or VHDL or System Verilog. They are technology independent and offer high degree of modification flexibility. RTL is the complete abstraction of our design. Since SOC complexity is growing day by day with new technologies and requirement, it will be very much difficult to debug and fix issues after physical level. So to reduce effort and increase efficiency and accuracy it is necessary to fix most of the bugs in RTL level. Also if we are using soft IP, then our bug free IP can be used by third party. So early detection of bugs helps us not to go back to entire design and do all the process again and again. One of the important issue at RTL level of a design is the Clock Domain Crossing (CDC) problem. This is the issue which affects the performance at each and every stage of the design flow. Failure in fixing these issues at the earlier stage makes the design unreliable and design performance collapses. The main issue in real time clock designs are the metastability issue. Although we cannot check or see these issues using our simulator but we have to make preventions at RTL level. This is done by restructuring the design and adding required synchronizers. One more important area of consideration in VLSI design is power consumption. In modern low power designs low power is a key factor. So design consuming less power is preferred over design consuming more power. This decision should be made as early as possible. RTL quality check helps us on this aspect. Using different tools power estimation can be performed at RTL stage which saves lots of efforts in redesigning. This project aims at checking clock domain crossing faults at RTL stage and doing redesign of circuit to eliminate those faults. Also an effort is made to compare quality of two designs in terms of delay, power consumption and area