A survey on fractional order control techniques for unmanned aerial and ground vehicles

In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

Hierarchical modeling and speed control of networked induction motor systems

This paper proposes a hierarchical modeling method and a fuzzy speed control strategy for nonlinear networked induction motor systems subject to network induced time delay and packets dropout. The networked induction motor control system consists of a networked speed controller and a local controller. Fuzzy gain scheduling is applied on the networked speed controller to guarantee the robustness against complicated variations on the communication network. The state predictor is to compensate the time delay occurred in data transmission in the feedback channel. In stability analysis, the upper allowed limits of the time delay and packets dropout are calculated using the Lyapunov-Krasovskii theorem, respectively. Simulation and experimental results are given to illustrate the effectiveness of the proposed approach

Direct yaw-moment control of electric vehicles based on adaptive sliding mode

The direct yaw-moment control (DYC) system consisting of an upper controller and a lower controller is developed on the basis of sliding mode theory and adaptive control technique. First, the two-degree of freedom (2-DOF) model is utilized to calculate the ideal yaw rate. Then, the seven-degree of freedom (7-DOF) electric vehicle model is given to design the upper controller by employing first-order sliding mode (FOSM) method, which is constructed to guarantee the actual yaw rate to approach the ideal value and gain the additional yaw moment. On this basis, an adaptive first-order sliding mode (AFOSM) controller is designed to enhance the system robustness against probable modelling error and parametric uncertainties. In order to mitigate the chattering issue present in the FOSM controller, a novel adaptive super-twisting sliding mode (ASTSM) controller is proposed for the design of DYC. Furthermore, the lower controller converting the additional yaw moment into driving or braking torque acting on each wheel is also developed. Finally, The simulation results indicate that the proposed DYC system can improve the electric vehicle driving stability effectively

Design and Control of Power Converters 2019

In this book, 20 papers focused on different fields of power electronics are gathered. Approximately half of the papers are focused on different control issues and techniques, ranging from the computer-aided design of digital compensators to more specific approaches such as fuzzy or sliding control techniques. The rest of the papers are focused on the design of novel topologies. The fields in which these controls and topologies are applied are varied: MMCs, photovoltaic systems, supercapacitors and traction systems, LEDs, wireless power transfer, etc

Review of dynamic positioning control in maritime microgrid systems

For many offshore activities, including offshore oil and gas exploration and offshore wind farm construction, it is essential to keep the position and heading of the vessel stable. The dynamic positioning system is a progressive technology, which is extensively used in shipping and other maritime structures. To maintain the vessels or platforms from displacement, its thrusters are used automatically to control and stabilize the position and heading of vessels in sea state disturbances. The theory of dynamic positioning has been studied and developed in terms of control techniques to achieve greater accuracy and reduce ship movement caused by environmental disturbance for more than 30 years. This paper reviews the control strategies and architecture of the DPS in marine vessels. In addition, it suggests possible control principles and makes a comparison between the advantages and disadvantages of existing literature. Some details for future research on DP control challenges are discussed in this paper

Robust model-based fault estimation and fault-tolerant control : towards an integration

To maintain robustly acceptable system performance, fault estimation (FE) is adopted to reconstruct fault signals and a fault-tolerant control (FTC) controller is employed to compensate for the fault effects. The inevitably existing system and estimation uncertainties result in the so-called bi-directional robustness interactions defined in this work between the FE and FTC functions, which gives rise to an important and challenging yet open integrated FE/FTC design problem concerned in this thesis. An example of fault-tolerant wind turbine pitch control is provided as a practical motivation for integrated FE/FTC design.To achieve the integrated FE/FTC design for linear systems, two strategies are proposed. A H∞ optimization based approach is first proposed for linear systems with differentiable matched faults, using augmented state unknown input observer FE and adaptive sliding mode FTC. The integrated design is converted into an observer-based robust control problem solved via a single-step linear matrix inequality formulation.With the purpose of an integrated design with more freedom and also applicable for a range of general fault scenarios, a decoupling approach is further proposed. This approach can estimate and compensate unmatched non-differentiable faults and perturbations by combined adaptive sliding mode augmented state unknown input observer and backstepping FTC controller. The observer structure renders a recovery of the Separation Principle and allows great freedom for the FE/FTC designs.Integrated FE/FTC design strategies are also developed for Takagi-Sugeno fuzzy modelling nonlinear systems, Lipschitz nonlinear systems, and large-scale interconnected systems, based on extensions of the H∞ optimization approach for linear systems.Tutorial examples are used to illustrate the design strategies for each approach. Physical systems, a 3-DOF (degree-of-freedom) helicopter and a 3-machine power system, are used to provide further evaluation of the proposed integrated FE/FTC strategies. Future research on this subject is also outlined

Hierarchical modeling and speed control of networked induction motor systems

This paper proposes a hierarchical modeling method and a fuzzy speed control strategy for nonlinear networked induction motor systems subject to network induced time delay and packets dropout. The networked induction motor control system consists of a networked speed controller and a local controller. Fuzzy gain scheduling is applied on the networked speed controller to guarantee the robustness against complicated variations on the communication network. The state predictor is to compensate the time delay occurred in data transmission in the feedback channel. In stability analysis, the upper allowed limits of the time delay and packets dropout are calculated using the Lyapunov-Krasovskii theorem, respectively. Simulation and experimental results are given to illustrate the effectiveness of the proposed approach

ROS-based Controller for a Two-Wheeled Self-Balancing Robot

In this article, a controller based on a Robot Operating System (ROS) for a two-wheeled self-balancing robot is designed. The proposed ROS architecture is open, allowing the integration of different sensors, actuators, and processing units. The low-cost robot was designed for educational purposes. It used an ESP32 microcontroller as the central unit, an MPU6050 Inertial Measurement Unit sensor, DC motors with encoders, and an L298N integrated circuit as a power stage. The mathematical model is analyzed through Newton-Euler and linearized around an equilibrium point. The control objective is to self-balance the robot to the vertical axis in the presence of disturbances. The proposed control is based on a bounded saturation, which is lightweight and easy to implement in embedded systems with low computational resources. Experimental results are performed in real-time under regulation, conditions far from the equilibrium point, and rejection of external disturbances. The results show a good performance, thus validating the mechanical design, the embedded system, and the control scheme. The proposed ROS architecture allows the incorporation of different modules, such as mapping, autonomous navigation, and manipulation, which contribute to studying robotics, control, and embedded systems

Cognitive Vehicle Platooning in the Era of Automated Electric Transportation

Vehicle platooning is an important innovation in the automotive industry that aims at improving safety, mileage, efficiency, and the time needed to travel. This research focuses on the various aspects of vehicle platooning, one of the important aspects being analysis of different control strategies that lead to a stable and robust platoon. Safety of passengers being a very important consideration, the control design should be such that the controller remains robust under uncertain environments. As a part of the Department of Energy (DOE) project, this research also tries to show a demonstration of vehicle platooning using robots. In an automated highway scenario, a vehicle platoon can be thought of as a string of vehicles, following one another as a platoon. Being equipped by wireless communication capabilities, these vehicles communicate with one another to maintain their formation as a platoon, hence are cognitive. Autonomous capable vehicles in tightly spaced, computer-controlled platoons will lead to savings in energy due to reduced aerodynamic forces, as well as increased passenger comfort since there will be no sudden accelerations or decelerations. Impacts in the occurrence of collisions, if any, will be very low. The greatest benefit obtained is, however, an increase in highway capacity, along with reduction in traffic congestion, pollution, and energy consumption. Another aspect of this project is the automated electric transportation (AET). This aims at providing energy directly to vehicles from electric highways, thus reducing their energy consumption and CO2 emission. By eliminating the use of overhead wires, infrastructure can be upgraded by electrifying highways and providing energy on demand and in real time to moving vehicles via a wireless energy transfer phenomenon known as wireless inductive coupling. The work done in this research will help to gain an insight into vehicle platooning and the control system related to maintaining the vehicles in this formation