Survey of traffic control schemes and error control schemes for ATM networks

Among the techniques proposed for B-ISDN transfer mode, ATM concept is considered to be the most promising transfer technique because of its flexibility and efficiency. This paper surveys and reviews a number of topics related to ATM networks. Those topics cover congestion control, provision of multiple classes of traffic, and error control. Due to the nature of ATM networks, those issues are far more challenging than in conventional networks. Sorne of the more promising solutions to those issues are surveyed, and the corresponding results on performance are summarized. Future research problems in ATM protocol aspect are also presented

Application of an automatically designed fuzzy logic decision support system to connection admission control in ATM networks

PhDAbstract not availabl

Application of learning algorithms to traffic management in integrated services networks.

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN027131 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

COMPARATIVE ANALYSIS OF NEURO- FUZZY AND SIMPLEX OPTIMIZATION MODEL FOR CONGESTION CONTROL IN ATM NETWORK.

Congestion always occurred when the transmission rate increased the data handling capacity of the network. Congestion normally arises when the network resources are not managed efficiently. Therefore if the source delivers at a speed higher then service rate queue, the queue size will be higher. Also if the queue size is finite, then the packet will observed delay. MATLAB Software was used to carry out simulations to develop Congestion control optimization Scheme for ATM Network with the aims to reducing the congestion of Enugu ATM Network. The results of the research reveal the minimization of congestion application model for Enugu ATM using optimization and Neuro-fuzzy. The result shows that congestion control model with Optimization and Neuro-fuzzy were 0.00003153 and 0.00002098 respectively. The ATM Congestion was reduced by 0.0000105, which is 18.2% decrease after Neuro-fuzzy controller was used. The results show the application of Neuro-fuzzy model which can use to control and minimized the ATM Congestion of Enugu ATM Network. The result shows that when Neuro-fuzzy is applied the congestion and the packet queue length in the buffer will be minimized. Key words: Congestion, MATLAB, Optimization, Neuro-fuzzy, ATM DOI: 10.7176/CTI/10-05 Publication date:July 31st 2020

Some aspects of traffic control and performance evaluation of ATM networks

The emerging high-speed Asynchronous Transfer Mode (ATM) networks are expected to integrate through statistical multiplexing large numbers of traffic sources having a broad range of statistical characteristics and different Quality of Service (QOS) requirements. To achieve high utilisation of network resources while maintaining the QOS, efficient traffic management strategies have to be developed. This thesis considers the problem of traffic control for ATM networks. The thesis studies the application of neural networks to various ATM traffic control issues such as feedback congestion control, traffic characterization, bandwidth estimation, and Call Admission Control (CAC). A novel adaptive congestion control approach based on a neural network that uses reinforcement learning is developed. It is shown that the neural controller is very effective in providing general QOS control. A Finite Impulse Response (FIR) neural network is proposed to adaptively predict the traffic arrival process by learning the relationship between the past and future traffic variations. On the basis of this prediction, a feedback flow control scheme at input access nodes of the network is presented. Simulation results demonstrate significant performance improvement over conventional control mechanisms. In addition, an accurate yet computationally efficient approach to effective bandwidth estimation for multiplexed connections is investigated. In this method, a feed forward neural network is employed to model the nonlinear relationship between the effective bandwidth and the traffic situations and a QOS measure. Applications of this approach to admission control, bandwidth allocation and dynamic routing are also discussed. A detailed investigation has indicated that CAC schemes based on effective bandwidth approximation can be very conservative and prevent optimal use of network resources. A modified effective bandwidth CAC approach is therefore proposed to overcome the drawback of conventional methods. Considering statistical multiplexing between traffic sources, we directly calculate the effective bandwidth of the aggregate traffic which is modelled by a two-state Markov modulated Poisson process via matching four important statistics. We use the theory of large deviations to provide a unified description of effective bandwidths for various traffic sources and the associated ATM multiplexer queueing performance approximations, illustrating their strengths and limitations. In addition, a more accurate estimation method for ATM QOS parameters based on the Bahadur-Rao theorem is proposed, which is a refinement of the original effective bandwidth approximation and can lead to higher link utilisation

Call admission control using cell breathing concept for wideband CDMA

This paper presents a Call Admission Control (CAC) algorithm based fuzzy logic to maintain the quality of service using cell breathing concept. When a new call is accepted by a cell, its current user is generally affected due to cell breathing. The proposed CAC algorithm accepts a new call only if the current users in the cell are not jeopardized. Performance evaluation is done for single-cell and multicell scenarios. In multicell scenario dynamic assignment of users to the neighboring cell, so called handoff, has been considered to achieve a lower blocking probability. Handoff and new call requests are assumed with handoff being given preference using a reserved channel scheme. CAC for different types of services are shown which depend upon the bandwidth requirement for voice, data and video. Distance, arrival rate, bandwidth and nonorthogonality factor of the signal are considered for making the call acceptance decision. The paper demonstrates that fuzzy logic with the cell breathing concept can be used to develop a CAC algorithm to achieve a better performance evaluation

Motorized cart

Motorized cart is known as an effective tool and timeless that help people carry heavy loads. For farmers, it has an especially vital tool for moving goods. Oil palm farmers typically uses the wheelbarrow to move the oil palm fruit (Figure 10.1). However, there is a lack of equipment that should be further enhanced in capabilities. Motorized carts that seek to add automation to wheelbarrow as it is to help people save manpower while using it. At present, oil palm plantation industry is among the largest in Malaysia. However, in an effort to increase the prestige of the industry to a higher level there are challenges to be faced. Shortage of workers willing to work the farm for harvesting oil palm has given pain to manage oil palm plantations. Many have complained about the difficulty of hiring foreign workers and a high cost. Although there are tools that can be used to collect or transfer the proceeds of oil palm fruits such as carts available. However, these tools still have the disadvantage that requires high manpower to operate. Moreover, it is not suitable for all land surfaces and limited cargo space. Workload and manpower dependence has an impact on farmers' income