High cycle fatigue life prediction of laser additive manufactured stainless steel:A machine learning approach

Variations in the high cycle fatigue response of laser powder bed fusion materials can be caused by the choice of processing and post-processing strategies. The numerous influencing factors arising from the process demand an effective and unified approach to fatigue property assessment. This work examines the use of a neuro-fuzzy-based machine learning method for predicting the high cycle fatigue life of laser powder bed fusion stainless steel 316L. A dataset, consisting of fatigue life data for samples subjected to varying processing conditions (laser power, scan speed and layer thickness), post-processing treatments (annealing and hot isostatic pressing) and cyclic stresses, was constructed for simulating a complex nonlinear input-output environment. The associated fracture mechanisms, including the modes of crack initiation and deformation, were characterised. Two models, by employing the processing/post-processing parameters and the static tensile properties respectively as the inputs, were developed from the training data. Despite the diverse fatigue and fracture properties, the models demonstrated good prediction accuracy when checked against the test data, and the computationally-derived fuzzy rules agree well with understanding of the fracture mechanisms. Direct application of the model to literature results, however, yielded a range of prediction accuracies because of the variability in the reported data. Retraining the model by incorporating the literature results into the dataset led to improved modelling performance.Accepted versio

The design and intelligent control of an autonomous mobile robot

This thesis presents an investigation into the problems of exploration, map building and collision free navigation for intelligent autonomous mobile robots. The project began with an extensive review of currently available literature in the field of mobile robot research, which included intelligent control techniques and their application. It became clear that there was scope for further development with regard to map building and exploration in new and unstructured environments. Animals have an innate propensity to exhibit such abilities, and so the analogous use of artificial neural networks instead of actual neural systems was examined for use as a method of robot mapping. A simulated behaviour based mobile robot was used in conjunction with a growing cell structure neural network to map out new environments. When using the direct application of this algorithm, topological irregularities were observed to be the direct result of correlations within the input data stream. A modification to this basic system was shown to correct the problem, but further developments would be required to produce a generic solution. The mapping algorithms gained through this approach, although more similar to biological systems, are computationally inefficient in comparison to the methods which were subsequently developed. A novel mapping method was proposed based on the robot creating new location vectors, or nodes, when it exceeded a distance threshold from its mapped area. Network parameters were developed to monitor the state of growth of the network and aid the robot search process. In simulation, the combination of the novel mapping and search process were shown to be able to construct maps which could be subsequently used for collision free navigation. To develop greater insights into the control problem and to validate the simulation work the control structures were ported to a prototype mobile robot. The mobile robot was of circular construction, with a synchro-drive wheel configuration, and was equipped with eight ultrasonic distance sensors and an odometric positioning system. It was self-sufficient, incorporating all its power and computational resources. The experiments observed the effects of odometric drift and demonstrated methods of re-correction which were shown to be effective. Both the novel mapping method, and a new algorithm based on an exhaustive mesh search, were shown to be able to explore different environments and subsequently achieve collision free navigation. This was shown in all cases by monitoring the estimates in the positional error which remained within fixed bounds

Embracing Analytics in the Drinking Water Industry

Analytics can support numerous aspects of water industry planning, management, and operations. Given this wide range of touchpoints and applications, it is becoming increasingly imperative that the championship and capability of broad-based analytics needs to be developed and practically integrated to address the current and transitional challenges facing the drinking water industry. Analytics will contribute substantially to future efforts to provide innovative solutions that make the water industry more sustainable and resilient. The purpose of this book is to introduce analytics to practicing water engineers so they can deploy the covered subjects, approaches, and detailed techniques in their daily operations, management, and decision-making processes. Also, undergraduate students as well as early graduate students who are in the water concentrations will be exposed to established analytical techniques, along with many methods that are currently considered to be new or emerging/maturing. This book covers a broad spectrum of water industry analytics topics in an easy-to-follow manner. The overall background and contexts are motivated by (and directly drawn from) actual water utility projects that the authors have worked on numerous recent years. The authors strongly believe that the water industry should embrace and integrate data-driven fundamentals and methods into their daily operations and decision-making process(es) to replace established ìrule-of-thumbî and weak heuristic approaches ñ and an analytics viewpoint, approach, and culture is key to this industry transformation

Load Estimation For Electric Power Distribution Networks

In electric power distribution systems, the major determinant in electricity supply strategy is the quantity of demand. Customers need to be accurately represented using updated nodal load information as a requirement for efficient control and operation of the distribution network. In Distribution Load Estimation (DLE), two major categories of data are utilized: historical data and direct real-time measured data. In this thesis, a comprehensive survey on the state-of-the-art methods for estimating loads in distribution networks is presented. Then, a novel method for representing historical data in the form of Representative Load Curves (RLCs) for use in realtime DLE is also described. Adaptive Neuro-Fuzzy Inference Systems (ANFIS) is used in this regard to determine RLCs. An RLC is a curve that represents the behavior of the load during a specified time span; typically daily, weekly or monthly based on historical data. Although RLCs provide insight about the variation of load, it is not accurate enough for estimating real-time load. This therefore, should be used along with real-time measurements to estimate the load more accurately. It is notable that more accurate RLCs lead to better real-time load estimation in distribution networks. This thesis addresses the need to obtain accurate RLCs to assist in the decision-making process pertaining to Radial Distribution Networks (RDNs).This thesis proposes a method based on Adaptive Neuro-Fuzzy Inference Systems (ANFIS) architecture to estimate the RLCs for Distribution Networks. The performance of the method is demonstrated and simulated, on a test 11kV Radial Distribution Network using the MATLAB software. The Mean Absolute Percent Error (MAPE) criterion is used to justify the accuracy of the RLCs

Computational Intelligence Application in Electrical Engineering

The Special Issue "Computational Intelligence Application in Electrical Engineering" deals with the application of computational intelligence techniques in various areas of electrical engineering. The topics of computational intelligence applications in smart power grid optimization, power distribution system protection, and electrical machine design and control optimization are presented in the Special Issue. The co-simulation approach to metaheuristic optimization methods and simulation tools for a power system analysis are also presented. The main computational intelligence techniques, evolutionary optimization, fuzzy inference system, and an artificial neural network are used in the research presented in the Special Issue. The articles published in this issue present the recent trends in computational intelligence applications in the areas of electrical engineering

Advances and Trends in Mathematical Modelling, Control and Identification of Vibrating Systems

This book introduces novel results on mathematical modelling, parameter identification, and automatic control for a wide range of applications of mechanical, electric, and mechatronic systems, where undesirable oscillations or vibrations are manifested. The six chapters of the book written by experts from international scientific community cover a wide range of interesting research topics related to: algebraic identification of rotordynamic parameters in rotor-bearing system using finite element models; model predictive control for active automotive suspension systems by means of hydraulic actuators; model-free data-driven-based control for a Voltage Source Converter-based Static Synchronous Compensator to improve the dynamic power grid performance under transient scenarios; an exact elasto-dynamics theory for bending vibrations for a class of flexible structures; motion profile tracking control and vibrating disturbance suppression for quadrotor aerial vehicles using artificial neural networks and particle swarm optimization; and multiple adaptive controllers based on B-Spline artificial neural networks for regulation and attenuation of low frequency oscillations for large-scale power systems. The book is addressed for both academic and industrial researchers and practitioners, as well as for postgraduate and undergraduate engineering students and other experts in a wide variety of disciplines seeking to know more about the advances and trends in mathematical modelling, control and identification of engineering systems in which undesirable oscillations or vibrations could be presented during their operation

Intelligent Control Strategies for an Autonomous Underwater Vehicle

The dynamic characteristics of autonomous underwater vehicles (AUVs) present a control problem that classical methods cannot often accommodate easily. Fundamentally, AUV dynamics are highly non-linear, and the relative similarity between the linear and angular velocities about each degree of freedom means that control schemes employed within other flight vehicles are not always applicable. In such instances, intelligent control strategies offer a more sophisticated approach to the design of the control algorithm. Neurofuzzy control is one such technique, which fuses the beneficial properties of neural networks and fuzzy logic in a hybrid control architecture. Such an approach is highly suited to development of an autopilot for an AUV. Specifically, the adaptive network-based fuzzy inference system (ANFIS) is discussed in Chapter 4 as an effective new approach for neurally tuning course-changing fuzzy autopilots. However, the limitation of this technique is that it cannot be used for developing multivariable fuzzy structures. Consequently, the co-active ANFIS (CANFIS) architecture is developed and employed as a novel multi variable AUV autopilot within Chapter 5, whereby simultaneous control of the AUV yaw and roll channels is achieved. Moreover, this structure is flexible in that it is extended in Chapter 6 to perform on-line control of the AUV leading to a novel autopilot design that can accommodate changing vehicle pay loads and environmental disturbances. Whilst the typical ANFIS and CANFIS structures prove effective for AUV control system design, the well known properties of radial basis function networks (RBFN) offer a more flexible controller architecture. Chapter 7 presents a new approach to fuzzy modelling and employs both ANFIS and CANFIS structures with non-linear consequent functions of composite Gaussian form. This merger of CANFIS and a RBFN lends itself naturally to tuning with an extended form of the hybrid learning rule, and provides a very effective approach to intelligent controller development.The Sea Systems and Platform Integration Sector, Defence Evaluation and Research Agency, Winfrit