Doubly-fed induction generator used in wind energy

Wound-rotor induction generator has numerous advantages in wind power generation over other generators. One scheme for wound-rotor induction generator is realized when a converter cascade is used between the slip-ring terminals and the utility grid to control the rotor power. This configuration is called the doubly-fed induction generator (DFIG). In this work, a novel induction machine model is developed. This model includes the saturation in the main and leakage flux paths. It shows that the model which considers the saturation effects gives more realistic results. A new technique, which was developed for synchronous machines, was applied to experimentally measure the stator and rotor leakage inductance saturation characteristics on the induction machine. A vector control scheme is developed to control the rotor side voltage-source converter. Vector control allows decoupled or independent control of both active and reactive power of DFIG. These techniques are based on the theory of controlling the B- and q- axes components of voltage or current in different reference frames. In this work, the stator flux oriented rotor current control, with decoupled control of active and reactive power, is adopted. This scheme allows the independent control of the generated active and reactive power as well as the rotor speed to track the maximum wind power point. Conventionally, the controller type used in vector controllers is of the PI type with a fixed proportional and integral gain. In this work, different intelligent schemes by which the controller can change its behavior are proposed. The first scheme is an adaptive gain scheduler which utilizes different characteristics to generate the variation in the proportional and the integral gains. The second scheme is a fuzzy logic gain scheduler and the third is a neuro-fuzzy controller. The transient responses using the above mentioned schemes are compared analytically and experimentally. It has been found that although the fuzzy logic and neuro-fuzzy schemes are more complicated and have many parameters; this complication provides a higher degree of freedom in tuning the controller which is evident in giving much better system performance. Finally, the simulation results were experimentally verified by building the experimental setup and implementing the developed control schemes

Grey Fuzzy Sliding Mode Control with Grey Estimator for Brushless Doubly Fed Motor

In this paper, a grey fuzzy sliding mode controller (GFSMC) for brushless doubly fed motor (BDFM) adjustable speed system is presented. A grey model estimator and adaptive fuzzy control technology are incorporated into the sliding mode control (SMC) to adaptively regulate the adaptive law of SMC. The proposed adaptive fuzzy equivalent controller, adaptive fuzzy switching controller, and grey model compensation controller for BDFM can eliminate the average chattering encountered by most SMC schemes, improve the robustness, and obtain excellent static and dynamic performances of SMC. Simulation results show that the proposed control strategy is feasible, correct and effective

Optimization of Fuzzy Logic Controller for Supervisory Power System Stabilizers

This paper presents a powerful supervisory power system stabilizer (PSS) using an adaptive fuzzy logic controller driven by an adaptive fuzzy set (AFS). The system under study consists of two synchronous generators, each fitted with a PSS, which are connected via double transmission lines. Different types of PSS-controller techniques are considered. The proposed genetic adaptive fuzzy logic controller (GAFLC)-PSS, using 25 rules, is compared with a static fuzzy logic controller (SFLC) driven by a fixed fuzzy set (FFS) which has 49 rules. Both fuzzy logic controller (FLC) algorithms utilize the speed error and its rate of change as an input vector. The adaptive FLC algorithm uses a genetic algorithmto tune the parameters of the fuzzy set of each PSS. The FLC’s are simulated and tested when the system is subjected to different disturbances under a wide range of operating points. The proposed GAFLC using AFS reduced the computational time of the FLC, where the number of rules is reduced from 49 to 25 rules. In addition, the proposed adaptive FLC driven by a genetic algorithm also reduced the complexity of the fuzzy model, while achieving a good dynamic response of the system under study

Synthetic inertia control based on fuzzy adaptive differential evolution

The transformation of the traditional transmission power systems due to the current rise of non-synchronous generation on it presents new engineering challenges. One of the challenges is the degradation of the inertial response due to the large penetration of high power converters used for the interconnection of renewables energy sources. The addition of a supplementary synthetic inertia control loop can contribute to the improvement of the inertial response. This paper proposes the application of a novel Fuzzy Adaptive Differential Evolution (FADE) algorithm for the tuning of a fuzzy controller for the improvement of the synthetic inertia control in power systems. The method is validated with two test power systems: (i) an aggregated power system and its purpose is to understand the controller-system behavior, and (ii) a two-area test power system where one of the synchronous machine has been replaced by a full aggregated model of a Wind Turbine Generator (WTG), whereby different limits in the tuning process can be analyzed. Results demonstrate the evolution of the membership functions and the inertial response enhancement in the respective test cases. Moreover, the appropriate tuning of the controller shows that it is possible to substantially reduce the instantaneous frequency deviation

Designing power system stabilizer for multimachine power system using neuro-fuzzy algorithm

This paper describes a design procedure for a fuzzy logic based power system stabilizer (FLPSS) and adaptive neuro-fuzzy inference system (ANFIS) and investigates their robustness for a multi-machine power system. Speed deviation of a machine and its derivative are chosen as the input signals to the FLPSS. A four-machine and a two-area power system is used as the case study. Computer simulations for the test system subjected to transient disturbances i.e. a three phase fault, were carried out and the results showed that the proposed controller is able to prove its effectiveness and improve the system damping when compared to a conventional lead-lag based power system stabilizer controller

Optimization of Fuzzy Logic Controller for Supervisory Power System Stabilizers

This paper presents a powerful supervisory power system stabilizer (PSS) using an adaptive fuzzy logic controller driven by an adaptive fuzzy set (AFS). The system under study consists of two synchronous generators, each fitted with a PSS, which are connected via double transmission lines. Different types of PSS-controller techniques are considered. The proposed genetic adaptive fuzzy logic controller (GAFLC)-PSS, using 25 rules, is compared with a static fuzzy logic controller (SFLC) driven by a fixed fuzzy set (FFS) which has 49 rules. Both fuzzy logic controller (FLC) algorithms utilize the speed error and its rate of change as an input vector. The adaptive FLC algorithm uses a genetic algorithmto tune the parameters of the fuzzy set of each PSS. The FLC’s are simulated and tested when the system is subjected to different disturbances under a wide range of operating points. The proposed GAFLC using AFS reduced the computational time of the FLC, where the number of rules is reduced from 49 to 25 rules. In addition, the proposed adaptive FLC driven by a genetic algorithm also reduced the complexity of the fuzzy model, while achieving a good dynamic response of the system under study

A New Sliding Mode Control Strategy for Variable-Speed Wind Turbine Power Maximization

This is the peer reviewed version of the following article: Khalfallah Tahir, Cheikh Belfedal, Tayeb Allaoui, Mouloud Denai, and M’hamed Doumi, ‘A new sliding mode control strategy for variable‐speed wind turbine power maximization’, International Transactions on Electrical Energy Systems, Vol. 28 (4): e2513, April 2018, which has been published in final form at https://doi.org/10.1002/etep.2513. Under embargo until 10 January 2019. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.The paper proposes a new sliding mode power control strategy for a wound-field synchronous generator-based variable speed wind energy conversion systems to maximize the power extracted from the wind turbine. The proposed controller can handle the inherent nonlinearities in wind energy conversion systems and the randomness of the wind speed as well as the uncertainties of the model and external disturbances. To reduce the chattering phenomenon that characterizes conventional sliding mode control, a sigmoid function with a variable boundary layer is proposed. The adaptive switching gains are adjusted on-line by using a fuzzy logic-based technique. Several simulation scenarios were performed to evaluate the performance of the proposed control scheme. The results demonstrate that this controller provides excellent response characteristics, is robust against parameter variations, and free from chattering phenomenon as compared with the conventional sliding mode control.Peer reviewedFinal Accepted Versio