759 research outputs found
Dynamic Modeling and Torque Feedforward based Optimal Fuzzy PD control of a High-Speed Parallel Manipulator
Dynamic modeling and control of high-speed parallel manipulators are of importance due to their industrial applications deployed in production lines. However, there are still a number of open problems, such as the development of a precise dynamic model to be used in the model-based control design. This paper presents a four-limb parallel manipulator with Schönflies motion and its simplified dynamic modeling process. Then, in order to fix the issue that computed torque method control (CTC) will spend a lot of time to calculate dynamic parameters in real-time, offline torque feedforward-based PD (TFPD) control law is adopted in the control system. At the same time, fuzzy logic is also used to tune the gains of PD controller to adapt to the variation of external disturbance and compensate the un-modeled uncertainty. Additionally, bottom widths of membership functions of fuzzy controller are optimized by bat algorithm. Finally, three controllers of CTC, TFPD and bat algorithm-based torque feedforwad fuzzy PD controller (BA-TFFPD) are compared in trajectory tracking simulation. Fro the result, compared with TFPD and CTC, BA-TFFPD can lead faster transient response and lower tracking error, which prove the validity of BA-TFFPD
Fuzzy logic based robotic controller
Existing Proportional-Integral-Derivative (PID) robotic controllers rely on an inverse kinematic model to convert user-specified cartesian trajectory coordinates to joint variables. These joints experience friction, stiction, and gear backlash effects. Due to lack of proper linearization of these effects, modern control theory based on state space methods cannot provide adequate control for robotic systems. In the presence of loads, the dynamic behavior of robotic systems is complex and nonlinear, especially where mathematical modeling is evaluated for real-time operators. Fuzzy Logic Control is a fast emerging alternative to conventional control systems in situations where it may not be feasible to formulate an analytical model of the complex system. Fuzzy logic techniques track a user-defined trajectory without having the host computer to explicitly solve the nonlinear inverse kinematic equations. The goal is to provide a rule-based approach, which is closer to human reasoning. The approach used expresses end-point error, location of manipulator joints, and proximity to obstacles as fuzzy variables. The resulting decisions are based upon linguistic and non-numerical information. This paper presents a solution to the conventional robot controller which is independent of computationally intensive kinematic equations. Computer simulation results of this approach as obtained from software implementation are also discussed
Robot Manipulators
Robot manipulators are developing more in the direction of industrial robots than of human workers. Recently, the applications of robot manipulators are spreading their focus, for example Da Vinci as a medical robot, ASIMO as a humanoid robot and so on. There are many research topics within the field of robot manipulators, e.g. motion planning, cooperation with a human, and fusion with external sensors like vision, haptic and force, etc. Moreover, these include both technical problems in the industry and theoretical problems in the academic fields. This book is a collection of papers presenting the latest research issues from around the world
Inverse Kinematics Based on Fuzzy Logic and Neural Networks for the WAM-Titan II Teleoperation System
The inverse kinematic problem is crucial for robotics. In this paper, a solution algorithm is presented using artificial intelligence to improve the pseudo-inverse Jacobian calculation for the 7-DOF Whole Arm Manipulator (WAM) and 6-DOF Titan II teleoperation system. An investigation of the inverse kinematics based on fuzzy logic and artificial neural networks for the teleoperation system was undertaken. Various methods such as Adaptive Neural-Fuzzy Inference System (ANFIS), Genetic Algorithms (GA), Multilayer Perceptrons (MLP) Feedforward Networks, Radial Basis Function Networks (RBF) and Generalized Regression Neural Networks (GRNN) were tested and simulated using MATLAB. Each method for identification of the pseudo-inverse problem was tested, and the best method was selected from the simulation results and the error analysis.
From the results, the Multilayer Perceptrons with Levenberg-Marquardt (MLP-LM) method had the smallest error and the fastest computation among the other methods. For the WAM-Titan II teleoperation system, the new inverse kinematics calculations for the Titan II were simulated and analyzed using MATLAB. Finally, extensive C code for the alternative algorithm was developed, and the inverse kinematics based on the artificial neural network with LM method is implemented in the real system. The maximum error of Cartesian position was 1.3 inches, and from several trajectories, 75 % of time implementation was achieved compared to the conventional method. Because fast performance of a real time system in the teleoperation is vital, these results show that the new inverse kinematics method based on the MLP-LM is very successful with the acceptable error
Center of Pressure Feedback for Controlling the Walking Stability Bipedal Robots using Fuzzy Logic Controller
This paper presents a sensor-based stability walk for bipedal robots by using force sensitive resistor (FSR) sensor. To perform walk stability on uneven terrain conditions, FSR sensor is used as feedbacks to evaluate the stability of bipedal robot instead of the center of pressure (CoP). In this work, CoP that was generated from four FSR sensors placed on each foot-pad is used to evaluate the walking stability. The robot CoP position provided an indication of walk stability. The CoP position information was further evaluated with a fuzzy logic controller (FLC) to generate appropriate offset angles to be applied to meet a stable situation. Moreover, in this paper designed a FLC through CoP region's stability and stable compliance control are introduced. Finally, the performances of the proposed methods were verified with 18-degrees of freedom (DOF) kid-size bipedal robot
Biomimetic Manipulator Control Design for Bimanual Tasks in the Natural Environment
As robots become more prolific in the human environment, it is important that safe operational
procedures are introduced at the same time; typical robot control methods are
often very stiff to maintain good positional tracking, but this makes contact (purposeful
or accidental) with the robot dangerous. In addition, if robots are to work cooperatively
with humans, natural interaction between agents will make tasks easier to perform with
less effort and learning time. Stability of the robot is particularly important in this
situation, especially as outside forces are likely to affect the manipulator when in a close
working environment; for example, a user leaning on the arm, or task-related disturbance
at the end-effector.
Recent research has discovered the mechanisms of how humans adapt the applied force
and impedance during tasks. Studies have been performed to apply this adaptation to
robots, with promising results showing an improvement in tracking and effort reduction
over other adaptive methods. The basic algorithm is straightforward to implement,
and allows the robot to be compliant most of the time and only stiff when required by
the task. This allows the robot to work in an environment close to humans, but also
suggests that it could create a natural work interaction with a human. In addition, no
force sensor is needed, which means the algorithm can be implemented on almost any
robot.
This work develops a stable control method for bimanual robot tasks, which could also
be applied to robot-human interactive tasks. A dynamic model of the Baxter robot is
created and verified, which is then used for controller simulations. The biomimetic control
algorithm forms the basis of the controller, which is developed into a hybrid control
system to improve both task-space and joint-space control when the manipulator is disturbed
in the natural environment. Fuzzy systems are implemented to remove the need
for repetitive and time consuming parameter tuning, and also allows the controller to
actively improve performance during the task. Experimental simulations are performed,
and demonstrate how the hybrid task/joint-space controller performs better than either
of the component parts under the same conditions. The fuzzy tuning method is then applied
to the hybrid controller, which is shown to slightly improve performance as well as
automating the gain tuning process. In summary, a novel biomimetic hybrid controller
is presented, with a fuzzy mechanism to avoid the gain tuning process, finalised with a
demonstration of task-suitability in a bimanual-type situation.EPSR
Industrial Robotics
This book covers a wide range of topics relating to advanced industrial robotics, sensors and automation technologies. Although being highly technical and complex in nature, the papers presented in this book represent some of the latest cutting edge technologies and advancements in industrial robotics technology. This book covers topics such as networking, properties of manipulators, forward and inverse robot arm kinematics, motion path-planning, machine vision and many other practical topics too numerous to list here. The authors and editor of this book wish to inspire people, especially young ones, to get involved with robotic and mechatronic engineering technology and to develop new and exciting practical applications, perhaps using the ideas and concepts presented herein
- …