403 research outputs found
Comparing fuzzy and intelligent PI controllers in stop-and-go manoeuvres
The aim of this work was twofold: on the one hand, to describe a comparative study of two intelligent control techniques-fuzzy and intelligent proportional-integral (PI) control, and on the other, to try to provide an answer to an as yet unsolved topic in the automotive sector-stop-and-go control in urban environments at very low speeds. Commercial vehicles exhibit nonlinear behavior and therefore constitute an excellent platform on which to check the controllers. This paper describes the design, tuning, and evaluation of the controllers performing actions on the longitudinal control of a car-the throttle and brake pedals-to accomplish stop-and-go manoeuvres. They are tested in two steps. First, a simulation model is used to design and tune the controllers, and second, these controllers are implemented in the commercial vehicle-which has automatic driving capabilities-to check their behavior. A stop-and-go manoeuvre is implemented with the two control techniques using two cooperating vehicles
On-line learning of a fuzzy controller for a precise vehicle cruise control system
Usually, vehicle applications require the use of artificial intelligent techniques to implement control methods, due to noise provided by sensors or the impossibility of full knowledge about dynamics of the vehicle (engine state, wheel pressure or occupiers weight). This work presents a method to on-line evolve a fuzzy controller for commanding vehicles? pedals at low speeds; in this scenario, the slightest alteration in the vehicle or road conditions can vary controller?s behavior in a non predictable way. The proposal adapts singletons positions in real time, and trapezoids used to codify the input variables are modified according with historical data. Experimentation in both simulated and real vehicles are provided to show how fast and precise the method is, even compared with a human driver or using different vehicles
Research on the Intelligent Control and Simulation of Automobile Cruise System Based on Fuzzy System
In order to improve the active safety driving vehicle and alleviate the intension of driving fatigue, an intelligent control strategy of automobile cruise is put forward based on the throttle or braking pedal combined control adopting the fuzzy control theory. A fuzzy logic controller is presented, which consists of the two input variables, the deviation of the theoretical safe distance and relative distance and the relative velocity between the preceding vehicle and the cruise vehicle, and the single output variable, that is, the throttle opening or the braking pedal travel. Taking the test data of 1.6 L vehicle with auto-transmission as an example, the function on the intelligent cruise control system is simulated adopting MATLAB/Simulink aiming at different working conditions on the city road. The simulation results show that the control strategy possesses integrated capability of automated Stop & Go control, actively following the preceding vehicle on the conditions of keeping the safety distance and the constant velocity cruise. The research results can offer the theory and technology reference for setting dSPACE type and developing the integrated control product of automobile cruise system
Back-stepping variable structure controller design for off-road intelligent vehicle
In this paper, off-road path recognition and navigation control method are studied to realize intelligent vehicle autonomous driving in unstructured environment. Firstly, the traversable path is achieved by vision and laser sensors. The vehicle steering and driving coupled dynamic model is established. Secondly, a coordinated controller for steering and driving is proposed via the back-stepping variable structure control method, which can be used to deal with the unmatched uncertainties of the control system model. To reduce the chattering phenomenon caused by variable structure, the boundary layer approach is introduced. The results of simulation and off-road experiment show the effectiveness and robustness of the proposed controller
Implementation Of Fuzzy Logic Control Into An Equivalent Minimization Strategy For Adaptive Energy Management Of A Parallel Hybrid Electric Vehicle
As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Electric vehicles have been introduced by the industry, showing promising signs of reducing emissions production in the automotive sector. However, many consumers may be hesitant to purchase fully electric vehicles due to several uncertainty variables including available charging stations. Hybrid electric vehicles (HEVs) have been introduced to reduce problems while improving fuel economy. HEVs have led to the demand of creating more advanced controls software to consider multiple components for propulsive power in a vehicle. A large section in the software development process is the implementation of an optimal energy management strategy meant to improve the overall fuel efficiency of the vehicle. Optimal strategies can be implemented when driving conditions are known a prior. The Equivalent Consumption Minimization Strategy (ECMS) is an optimal control strategy that uses an equivalence factor to equate electrical to mechanical power when performing torque split determination between the internal combustion engine and electric motor for propulsive and regenerative torque. This equivalence factor is determined from offline vehicle simulations using a sensitivity analysis to provide optimal fuel economy results while maintaining predetermined high voltage battery state of charge (SOC) constraints. When the control hierarchy is modified or different driving styles are applied, the analysis must be redone to update the equivalence factor. The goal of this work is to implement a fuzzy logic controller that dynamically updates the equivalence factor to improve fuel economy, maintain a strict charge sustaining window of operation for the high voltage battery, and reduce computational time required during algorithm development. The adaptive algorithm is validated against global optimum fuel economy and charge sustaining results from a sensitivity analysis performed for multiple drive cycles. Results show a maximum fuel economy improvement of 9.82% when using a mild driving style and a 95% success rate when maintaining an ending SOC within 5% regardless of starting SOC. Recommendations for modification of the fuzzy logic controller are made to produce additional fuel economy and charge sustaining benefits from the parallel hybrid vehicle model
Control and Management Strategy of Autonomous Vehicle Functions
In this research, an autonomous vehicle function management methodology is
studied. In accordance with the traffic situation, the decision making level chooses the
optimal function that guarantees safety and minimizes fuel consumption while the
control level is implemented via neuromorphic strategy based on the brain limbic
system. To realize the decision making strategy, the Analytic Hierarchy Process (AHP)
is used by considering driving safety, driving speed, and fuel efficiency as the objectives.
According to the traffic situation and predefined driving mode, Lane Change Maneuver
(LCM) and Adaptive Cruise Control (ACC) are chosen as the alternative functions in the
AHP framework.
The adaptive AHP is utilized to cope with dynamically changing traffic
environment. The proposed adaptive AHP algorithm provides an optimal relative
importance matrix that is essential to make decisions under a varying traffic situation
and driving modes. The simulation results show that proposed autonomous vehicle
function management structure produces optimal decisions that satisfy the driving preference. The stability of BLS based control is also investigated via Cell-to-Cell
Mapping.
In this research, autonomous vehicle functions such as Lane change maneuver
and Adaptive cruise control are developed by means of BLS based control. The
simulation results considered various traffic situations that an autonomous vehicle can
encounter. To demonstrate the suggested control method Cell-to-Cell Mapping is
utilized. Subsequently, the autonomous vehicle function management strategy is
developed by Applying AHP and an adaptive AHP strategy is developed to cope with
various traffic situations and driving modes. The suggested method is verified numerical
simulations
An Intelligent V2I-Based Traffic Management System
International audienceVehicles equipped with intelligent systems designed to prevent accidents, such as collision warning systems (CWSs) or lane-keeping assistance (LKA), are now on the market. The next step in reducing road accidents is to coordinate such vehicles in advance not only to avoid collisions but to improve traffic flow as well. To this end, vehicle-to-infrastructure (V2I) communications are essential to properly manage traffic situations. This paper describes the AUTOPIA approach toward an intelligent traffic management system based on V2I communications. A fuzzy-based control algorithm that takes into account each vehicle's safe and comfortable distance and speed adjustment for collision avoidance and better traffic flow has been developed. The proposed solution was validated by an IEEE-802.11p-based communications study. The entire system showed good performance in testing in real- world scenarios, first by computer simulation and then with real vehicles
Controller with Vehicular Communication Design for Vehicular Platoon System
PhD ThesisTracked Electric Vehicles (TEV) which is a new mass-transport system. It aims to provide
a safe, efficient and coordinated traffic system. In TEV, the inter-vehicular distance is
reduced to only a quarter of the regular car length and where drive at 200km/h enabling
mass transport at uniform speed. Under this requirement, the design of the controller is
particularly important. This thesis first developed an innovative approach using adaptive
Proportion, integral and derivation (PID) controller using fuzzy logic theory to keep variable
time-gap between dynamic cars for platooning system with communication delay. The
simulation results presented show a significant improvement in keeping time-gap variable
between the cars enabling a safe and efficient flow of the platooning system. Secondly,
this thesis investigates the use of Slide Mode Control (SMC) for TEV. It studies different
V2V communication topology structures using graph theory and proposes a novel SMC
design with and without global dynamic information. The Lyapunov candidate function was
chosen to study the impact which forms an integral part for current and future research. The
simulation results show that this novel SMC has a tolerance ability for communication delay.
In order to present the real time TEV platoon system, a similar PI controller has been utilized
in a novel automated vehicle, based on Raspberry Pi, multi-sensors and the designed Remote
Control (RC) car. Thirdly, in order to obtain precise positioning information for vehicles in
platoon system, this thesis describes Inertial Measurement Unit (IMU)/Global Navigation
Satellite System (GNSS) data fusion to achieve a highly precise positioning solution. The
results show that the following vehicles can reach the same velocity and acceleration as the
leading vehicle in 5 seconds and the spacing error is less than 0.1m. The practical results are
in line with those from the simulated experiment
Design and validation of decision and control systems in automated driving
xxvi, 148 p.En la última década ha surgido una tendencia creciente hacia la automatización de los vehículos, generando un cambio significativo en la movilidad, que afectará profundamente el modo de vida de las personas, la logística de mercancías y otros sectores dependientes del transporte. En el desarrollo de la conducción automatizada en entornos estructurados, la seguridad y el confort, como parte de las nuevas funcionalidades de la conducción, aún no se describen de forma estandarizada. Dado que los métodos de prueba utilizan cada vez más las técnicas de simulación, los desarrollos existentes deben adaptarse a este proceso. Por ejemplo, dado que las tecnologías de seguimiento de trayectorias son habilitadores esenciales, se deben aplicar verificaciones exhaustivas en aplicaciones relacionadas como el control de movimiento del vehículo y la estimación de parámetros. Además, las tecnologías en el vehículo deben ser lo suficientemente robustas para cumplir con los requisitos de seguridad, mejorando la redundancia y respaldar una operación a prueba de fallos. Considerando las premisas mencionadas, esta Tesis Doctoral tiene como objetivo el diseño y la implementación de un marco para lograr Sistemas de Conducción Automatizados (ADS) considerando aspectos cruciales, como la ejecución en tiempo real, la robustez, el rango operativo y el ajuste sencillo de parámetros. Para desarrollar las aportaciones relacionadas con este trabajo, se lleva a cabo un estudio del estado del arte actual en tecnologías de alta automatización de conducción. Luego, se propone un método de dos pasos que aborda la validación de ambos modelos de vehículos de simulación y ADS. Se introducen nuevas formulaciones predictivas basadas en modelos para mejorar la seguridad y el confort en el proceso de seguimiento de trayectorias. Por último, se evalúan escenarios de mal funcionamiento para mejorar la seguridad en entornos urbanos, proponiendo una estrategia alternativa de estimación de posicionamiento para minimizar las condiciones de riesgo
- …