The State-of-the-art of Coordinated Ramp Control with Mixed Traffic Conditions

Ramp metering, a traditional traffic control strategy for conventional vehicles, has been widely deployed around the world since the 1960s. On the other hand, the last decade has witnessed significant advances in connected and automated vehicle (CAV) technology and its great potential for improving safety, mobility and environmental sustainability. Therefore, a large amount of research has been conducted on cooperative ramp merging for CAVs only. However, it is expected that the phase of mixed traffic, namely the coexistence of both human-driven vehicles and CAVs, would last for a long time. Since there is little research on the system-wide ramp control with mixed traffic conditions, the paper aims to close this gap by proposing an innovative system architecture and reviewing the state-of-the-art studies on the key components of the proposed system. These components include traffic state estimation, ramp metering, driving behavior modeling, and coordination of CAVs. All reviewed literature plot an extensive landscape for the proposed system-wide coordinated ramp control with mixed traffic conditions.Comment: 8 pages, 1 figure, IEEE INTELLIGENT TRANSPORTATION SYSTEMS CONFERENCE - ITSC 201

Vision-Based Lane-Changing Behavior Detection Using Deep Residual Neural Network

Accurate lane localization and lane change detection are crucial in advanced driver assistance systems and autonomous driving systems for safer and more efficient trajectory planning. Conventional localization devices such as Global Positioning System only provide road-level resolution for car navigation, which is incompetent to assist in lane-level decision making. The state of art technique for lane localization is to use Light Detection and Ranging sensors to correct the global localization error and achieve centimeter-level accuracy, but the real-time implementation and popularization for LiDAR is still limited by its computational burden and current cost. As a cost-effective alternative, vision-based lane change detection has been highly regarded for affordable autonomous vehicles to support lane-level localization. A deep learning-based computer vision system is developed to detect the lane change behavior using the images captured by a front-view camera mounted on the vehicle and data from the inertial measurement unit for highway driving. Testing results on real-world driving data have shown that the proposed method is robust with real-time working ability and could achieve around 87% lane change detection accuracy. Compared to the average human reaction to visual stimuli, the proposed computer vision system works 9 times faster, which makes it capable of helping make life-saving decisions in time

The impact of vehicle movement on exploitation parameters of roads and runways: a short review of the special issue

"The impact of vehicle movement on exploitation parameters of roads and runways: a short review of the special issue" Transport, 31(2), p. 127-13

Microsimulation models incorporating both demand and supply dynamics

There has been rapid growth in interest in real-time transport strategies over the last decade, ranging from automated highway systems and responsive traffic signal control to incident management and driver information systems. The complexity of these strategies, in terms of the spatial and temporal interactions within the transport system, has led to a parallel growth in the application of traffic microsimulation models for the evaluation and design of such measures, as a remedy to the limitations faced by conventional static, macroscopic approaches. However, while this naturally addresses the immediate impacts of the measure, a difficulty that remains is the question of how the secondary impacts, specifically the effect on route and departure time choice of subsequent trips, may be handled in a consistent manner within a microsimulation framework. The paper describes a modelling approach to road network traffic, in which the emphasis is on the integrated microsimulation of individual trip-makers’ decisions and individual vehicle movements across the network. To achieve this it represents directly individual drivers’ choices and experiences as they evolve from day-to-day, combined with a detailed within-day traffic simulation model of the space–time trajectories of individual vehicles according to car-following and lane-changing rules and intersection regulations. It therefore models both day-to-day and within-day variability in both demand and supply conditions, and so, we believe, is particularly suited for the realistic modelling of real-time strategies such as those listed above. The full model specification is given, along with details of its algorithmic implementation. A number of representative numerical applications are presented, including: sensitivity studies of the impact of day-to-day variability; an application to the evaluation of alternative signal control policies; and the evaluation of the introduction of bus-only lanes in a sub-network of Leeds. Our experience demonstrates that this modelling framework is computationally feasible as a method for providing a fully internally consistent, microscopic, dynamic assignment, incorporating both within- and between-day demand and supply dynamic

Towards Social Autonomous Vehicles: Efficient Collision Avoidance Scheme Using Richardson's Arms Race Model

Background Road collisions and casualties pose a serious threat to commuters around the globe. Autonomous Vehicles (AVs) aim to make the use of technology to reduce the road accidents. However, the most of research work in the context of collision avoidance has been performed to address, separately, the rear end, front end and lateral collisions in less congested and with high inter-vehicular distances. Purpose The goal of this paper is to introduce the concept of a social agent, which interact with other AVs in social manners like humans are social having the capability of predicting intentions, i.e. mentalizing and copying the actions of each other, i.e. mirroring. The proposed social agent is based on a human-brain inspired mentalizing and mirroring capabilities and has been modelled for collision detection and avoidance under congested urban road traffic. Method We designed our social agent having the capabilities of mentalizing and mirroring and for this purpose we utilized Exploratory Agent Based Modeling (EABM) level of Cognitive Agent Based Computing (CABC) framework proposed by Niazi and Hussain. Results Our simulation and practical experiments reveal that by embedding Richardson's arms race model within AVs, collisions can be avoided while travelling on congested urban roads in a flock like topologies. The performance of the proposed social agent has been compared at two different levels.Comment: 48 pages, 21 figure

Modelling of Driver and Pedestrian Behaviour – A Historical Review

Driver and pedestrian behaviour significantly affect the safety and the flow of traffic at the microscopic and macroscopic levels. The driver behaviour models describe the driver decisions made in different traffic flow conditions. Modelling the pedestrian behaviour plays an essential role in the analysis of pedestrian flows in the areas such as public transit terminals, pedestrian zones, evacuations, etc. Driver behaviour models, integrated into simulation tools, can be divided into car-following models and lane-changing models. The simulation tools are used to replicate traffic flows and infer certain regularities. Particular model parameters must be appropriately calibrated to approximate the realistic traffic flow conditions. This paper describes the existing car-following models, lane-changing models, and pedestrian behaviour models. Further, it underlines the importance of calibrating the parameters of microsimulation models to replicate realistic traffic flow conditions and sets the guidelines for future research related to the development of new models and the improvement of the existing ones.</p

Proposal of an adaptive infotainment system depending on driving scenario complexity

Tesi en modalitat Doctorat industrialPla de Doctorat industrial de la Generalitat de CatalunyaThe PhD research project is framed within the plan of industrial doctorates of the “Generalitat de Catalunya”. During the investigation, most of the work was carried out at the facilities of the vehicle manufacturer SEAT, specifically at the information and entertainment (infotainment) department. In the same way, there was a continuous cooperation with the telematics department of the UPC. The main objective of the project consisted in the design and validation of an adaptive infotainment system dependent on the driving complexity. The system was created with the purpose of increasing driver’ experience while guaranteeing a proper level of road safety. Given the increasing number of application and services available in current infotainment systems, it becomes necessary to devise a system capable of balancing these two counterparts. The most relevant parameters that can be used for balancing these metrics while driving are: type of services offered, interfaces available for interacting with the services, the complexity of driving and the profile of the driver. The present study can be divided into two main development phases, each phase had as outcome a real physical block that came to be part of the final system. The final system was integrated in a vehicle and validated in real driving conditions. The first phase consisted in the creation of a model capable of estimating the driving complexity based on a set of variables related to driving. The model was built by employing machine learning methods and the dataset necessary to create it was collected from several driving routes carried out by different participants. This phase allowed to create a model capable of estimating, with a satisfactory accuracy, the complexity of the road using easily extractable variables in any modern vehicle. This approach simplify the implementation of this algorithm in current vehicles. The second phase consisted in the classification of a set of principles that allow the design of the adaptive infotainment system based on the complexity of the road. These principles are defined based on previous researches undertaken in the field of usability and user experience of graphical interfaces. According to these of principles, a real adaptive infotainment system with the most commonly used functionalities; navigation, radio and media was designed and integrated in a real vehicle. The developed system was able to adapt the presentation of the content according to the estimation of the driving complexity given by the block developed in phase one. The adaptive system was validated in real driving scenarios by several participants and results showed a high level of acceptance and satisfaction towards this adaptive infotainment. As a starting point for future research, a proof of concept was carried out to integrate new interfaces into a vehicle. The interface used as reference was a Head Mounted screen that offered redundant information in relation to the instrument cluster. Tests with participants served to understand how users perceive the introduction of new technologies and how objective benefits could be blurred by initial biases.El proyecto de investigación de doctorado se enmarca dentro del plan de doctorados industriales de la Generalitat de Catalunya. Durante la investigación, la mayor parte del trabajo se llevó a cabo en las instalaciones del fabricante de vehículos SEAT, específicamente en el departamento de información y entretenimiento (infotainment). Del mismo modo, hubo una cooperación continua con el departamento de telemática de la UPC. El objetivo principal del proyecto consistió en el diseño y la validación de un sistema de información y entretenimiento adaptativo que se ajustaba de acuerdo a la complejidad de la conducción. El sistema fue creado con el propósito de aumentar la experiencia del conductor y garantizar un nivel adecuado en la seguridad vial. El proyecto surge dado el número creciente de aplicaciones y servicios disponibles en los sistemas actuales de información y entretenimiento; es por ello que se hace necesario contar con un sistema capaz de equilibrar estas dos contrapartes. Los parámetros más relevantes que se pueden usar para equilibrar estas métricas durante la conducción son: el tipo de servicios ofrecidos, las interfaces disponibles para interactuar con los servicios, la complejidad de la conducción y el perfil del conductor. El presente estudio se puede dividir en dos fases principales de desarrollo, cada fase tuvo como resultado un componente que se convirtió en parte del sistema final. El sistema final fue integrado en un vehículo y validado en condiciones reales de conducción. La primera fase consistió en la creación de un modelo capaz de estimar la complejidad de la conducción en base a un conjunto de variables relacionadas con la conducción. El modelo se construyó empleando "Machine Learning Methods" y el conjunto de datos necesario para crearlo se recopiló a partir de varias rutas de conducción realizadas por diferentes participantes. Esta fase permitió crear un modelo capaz de estimar, con una precisión satisfactoria, la complejidad de la carretera utilizando variables fácilmente extraíbles en cualquier vehículo moderno. Este enfoque simplifica la implementación de este algoritmo en los vehículos actuales. La segunda fase consistió en la clasificación de un conjunto de principios que permiten el diseño del sistema de información y entretenimiento adaptativo basado en la complejidad de la carretera. Estos principios se definen en base a investigaciones anteriores realizadas en el campo de usabilidad y experiencia del usuario con interfaces gráficas. De acuerdo con estos principios, un sistema de entretenimiento y entretenimiento real integrando las funcionalidades más utilizadas; navegación, radio y audio fue diseñado e integrado en un vehículo real. El sistema desarrollado pudo adaptar la presentación del contenido según la estimación de la complejidad de conducción dada por el bloque desarrollado en la primera fase. El sistema adaptativo fue validado en escenarios de conducción reales por varios participantes y los resultados mostraron un alto nivel de aceptación y satisfacción hacia este entretenimiento informativo adaptativo. Como punto de partida para futuras investigaciones, se llevó a cabo una prueba de concepto para integrar nuevas interfaces en un vehículo. La interfaz utilizada como referencia era una pantalla a la altura de los ojos (Head Mounted Display) que ofrecía información redundante en relación con el grupo de instrumentos. Las pruebas con los participantes sirvieron para comprender cómo perciben los usuarios la introducción de nuevas tecnologías y cómo los sesgos iniciales podrían difuminar los beneficios.Postprint (published version

Proposal of an adaptive infotainment system depending on driving scenario complexity

The PhD research project is framed within the plan of industrial doctorates of the “Generalitat de Catalunya”. During the investigation, most of the work was carried out at the facilities of the vehicle manufacturer SEAT, specifically at the information and entertainment (infotainment) department. In the same way, there was a continuous cooperation with the telematics department of the UPC. The main objective of the project consisted in the design and validation of an adaptive infotainment system dependent on the driving complexity. The system was created with the purpose of increasing driver’ experience while guaranteeing a proper level of road safety. Given the increasing number of application and services available in current infotainment systems, it becomes necessary to devise a system capable of balancing these two counterparts. The most relevant parameters that can be used for balancing these metrics while driving are: type of services offered, interfaces available for interacting with the services, the complexity of driving and the profile of the driver. The present study can be divided into two main development phases, each phase had as outcome a real physical block that came to be part of the final system. The final system was integrated in a vehicle and validated in real driving conditions. The first phase consisted in the creation of a model capable of estimating the driving complexity based on a set of variables related to driving. The model was built by employing machine learning methods and the dataset necessary to create it was collected from several driving routes carried out by different participants. This phase allowed to create a model capable of estimating, with a satisfactory accuracy, the complexity of the road using easily extractable variables in any modern vehicle. This approach simplify the implementation of this algorithm in current vehicles. The second phase consisted in the classification of a set of principles that allow the design of the adaptive infotainment system based on the complexity of the road. These principles are defined based on previous researches undertaken in the field of usability and user experience of graphical interfaces. According to these of principles, a real adaptive infotainment system with the most commonly used functionalities; navigation, radio and media was designed and integrated in a real vehicle. The developed system was able to adapt the presentation of the content according to the estimation of the driving complexity given by the block developed in phase one. The adaptive system was validated in real driving scenarios by several participants and results showed a high level of acceptance and satisfaction towards this adaptive infotainment. As a starting point for future research, a proof of concept was carried out to integrate new interfaces into a vehicle. The interface used as reference was a Head Mounted screen that offered redundant information in relation to the instrument cluster. Tests with participants served to understand how users perceive the introduction of new technologies and how objective benefits could be blurred by initial biases.El proyecto de investigación de doctorado se enmarca dentro del plan de doctorados industriales de la Generalitat de Catalunya. Durante la investigación, la mayor parte del trabajo se llevó a cabo en las instalaciones del fabricante de vehículos SEAT, específicamente en el departamento de información y entretenimiento (infotainment). Del mismo modo, hubo una cooperación continua con el departamento de telemática de la UPC. El objetivo principal del proyecto consistió en el diseño y la validación de un sistema de información y entretenimiento adaptativo que se ajustaba de acuerdo a la complejidad de la conducción. El sistema fue creado con el propósito de aumentar la experiencia del conductor y garantizar un nivel adecuado en la seguridad vial. El proyecto surge dado el número creciente de aplicaciones y servicios disponibles en los sistemas actuales de información y entretenimiento; es por ello que se hace necesario contar con un sistema capaz de equilibrar estas dos contrapartes. Los parámetros más relevantes que se pueden usar para equilibrar estas métricas durante la conducción son: el tipo de servicios ofrecidos, las interfaces disponibles para interactuar con los servicios, la complejidad de la conducción y el perfil del conductor. El presente estudio se puede dividir en dos fases principales de desarrollo, cada fase tuvo como resultado un componente que se convirtió en parte del sistema final. El sistema final fue integrado en un vehículo y validado en condiciones reales de conducción. La primera fase consistió en la creación de un modelo capaz de estimar la complejidad de la conducción en base a un conjunto de variables relacionadas con la conducción. El modelo se construyó empleando "Machine Learning Methods" y el conjunto de datos necesario para crearlo se recopiló a partir de varias rutas de conducción realizadas por diferentes participantes. Esta fase permitió crear un modelo capaz de estimar, con una precisión satisfactoria, la complejidad de la carretera utilizando variables fácilmente extraíbles en cualquier vehículo moderno. Este enfoque simplifica la implementación de este algoritmo en los vehículos actuales. La segunda fase consistió en la clasificación de un conjunto de principios que permiten el diseño del sistema de información y entretenimiento adaptativo basado en la complejidad de la carretera. Estos principios se definen en base a investigaciones anteriores realizadas en el campo de usabilidad y experiencia del usuario con interfaces gráficas. De acuerdo con estos principios, un sistema de entretenimiento y entretenimiento real integrando las funcionalidades más utilizadas; navegación, radio y audio fue diseñado e integrado en un vehículo real. El sistema desarrollado pudo adaptar la presentación del contenido según la estimación de la complejidad de conducción dada por el bloque desarrollado en la primera fase. El sistema adaptativo fue validado en escenarios de conducción reales por varios participantes y los resultados mostraron un alto nivel de aceptación y satisfacción hacia este entretenimiento informativo adaptativo. Como punto de partida para futuras investigaciones, se llevó a cabo una prueba de concepto para integrar nuevas interfaces en un vehículo. La interfaz utilizada como referencia era una pantalla a la altura de los ojos (Head Mounted Display) que ofrecía información redundante en relación con el grupo de instrumentos. Las pruebas con los participantes sirvieron para comprender cómo perciben los usuarios la introducción de nuevas tecnologías y cómo los sesgos iniciales podrían difuminar los beneficios