Parametric optimization of the femoropopliteal artery stent design based on numerical analysis

High-failure rates of Peripheral Arterial Disease (PAD) stenting were reported due to the inability of certain stent strut configuration to accommodate severe biomechanical environment of the Femoro-Popliteal Artery (FPA) such as bends, twists, and axially compresses during limb flexion. The unique of mechanical deformation environment in FPA has been considered one of main factors affecting the durability of the FPA stent and reducing the stent life. Consequently, various optimization techniques have been developed to improve the mechanical performance of the FPA stent. The present work shown that, the first-two of twelve FPA resemble stent models stent models have been selected with a net score of 3.65 Model I and, with a net score of 3.55 Model II via applying Pictorial Selection Method. Finite Element Method (FEM) of optimization study based-parameterization has been conducted for stent strut dimensions, stents were compared in terms of force-stress behavior. Multi Criteria Decision Making (MCDM) method has been utilized to identify the best combination of strut dimensions. The strut thickness parameterization results were in relation T α 1/σ (T is strut thickness) for both models with all mechanical loading modes. Moreover, the strut width parameterization results were in relation W α 1/σ (W is strut width) for both models with all mechanical loading modes. Whereas, the strut length parameterization results were in relation L α σ in case of Model I and, L α 1/σ (L is strut length) in case of Model II, under axial loads, while under three-point bending and torsion loading modes L α σ for both models, under radial compression the relations were L α 1/σ in case of Model I and, L α σ in case of Model II. The best combination of strut dimension in the thickness case was t4 = 230 µm for both models, in strut width were w3=0.180, and w4= 0.250 mm for Model I and Model II, respectively, and in strut length were l2= 1.40, and l2= 1.75 mm for Model I and Model II, respectively. In conclusions, the mathematical selection approach and the consistent mathematical approach of MCDM has been proposed, also the mechanical performance has been improved for parameterized stent models

Determination of Optimal Opening Scheme for Electromagnetic Loop Networks Based on Fuzzy Analytic Hierarchy Process

Studying optimization and decision for opening electromagnetic loop networks plays an important role in planning and operation of power grids. First, the basic principle of fuzzy analytic hierarchy process (FAHP) is introduced, and then an improved FAHP-based scheme evaluation method is proposed for decoupling electromagnetic loop networks based on a set of indicators reflecting the performance of the candidate schemes. The proposed method combines the advantages of analytic hierarchy process (AHP) and fuzzy comprehensive evaluation. On the one hand, AHP effectively combines qualitative and quantitative analysis to ensure the rationality of the evaluation model; on the other hand, the judgment matrix and qualitative indicators are expressed with trapezoidal fuzzy numbers to make decision-making more realistic. The effectiveness of the proposed method is validated by the application results on the real power system of Liaoning province of China

System configuration, fault detection, location, isolation and restoration: a review on LVDC Microgrid protections

Low voltage direct current (LVDC) distribution has gained the significant interest of research due to the advancements in power conversion technologies. However, the use of converters has given rise to several technical issues regarding their protections and controls of such devices under faulty conditions. Post-fault behaviour of converter-fed LVDC system involves both active converter control and passive circuit transient of similar time scale, which makes the protection for LVDC distribution significantly different and more challenging than low voltage AC. These protection and operational issues have handicapped the practical applications of DC distribution. This paper presents state-of-the-art protection schemes developed for DC Microgrids. With a close look at practical limitations such as the dependency on modelling accuracy, requirement on communications and so forth, a comprehensive evaluation is carried out on those system approaches in terms of system configurations， fault detection, location, isolation and restoration

Decision support systems for large dam planning and operation in Africa

Decision support systems/ Dams/ Planning/ Operations/ Social impact/ Environmental effects

Demand Response Strategy Based on Reinforcement Learning and Fuzzy Reasoning for Home Energy Management

As energy demand continues to increase, demand response (DR) programs in the electricity distribution grid are gaining momentum and their adoption is set to grow gradually over the years ahead. Demand response schemes seek to incentivise consumers to use green energy and reduce their electricity usage during peak periods which helps support grid balancing of supply-demand and generate revenue by selling surplus of energy back to the grid. This paper proposes an effective energy management system for residential demand response using Reinforcement Learning (RL) and Fuzzy Reasoning (FR). RL is considered as a model-free control strategy which learns from the interaction with its environment by performing actions and evaluating the results. The proposed algorithm considers human preference by directly integrating user feedback into its control logic using fuzzy reasoning as reward functions. Q-learning, a RL strategy based on a reward mechanism, is used to make optimal decisions to schedule the operation of smart home appliances by shifting controllable appliances from peak periods, when electricity prices are high, to off-peak hours, when electricity prices are lower without affecting the customer’s preferences. The proposed approach works with a single agent to control 14 household appliances and uses a reduced number of state-action pairs and fuzzy logic for rewards functions to evaluate an action taken for a certain state. The simulation results show that the proposed appliances scheduling approach can smooth the power consumption profile and minimise the electricity cost while considering user’s preferences, user’s feedbacks on each action taken and his/her preference settings. A user-interface is developed in MATLAB/Simulink for the Home Energy Management System (HEMS) to demonstrate the proposed DR scheme. The simulation tool includes features such as smart appliances, electricity pricing signals, smart meters, solar photovoltaic generation, battery energy storage, electric vehicle and grid supply.Peer reviewe

An empirical survey: Can green marketing really entice customers to pay more?

This research integrated the Social Cognition Theory and the Engel Kollat Blackwell customers’ purchasing model (EKB model) to synthetically discuss the three kinds of possible relations comprising “does negatively entice”, “does possibly entice” and “does positively entice” between green-marketing and customers’ purchasing and payment, with consideration given to environmental-protection issues. Based on the measured results, the most contributed contention of this research not only utilized three cross-analytical theories consisting of the social cognition theory (SCT) , the Fuzzy theory (FT) and the EKB model, and the novel F-ANP of the MCDM methodology to evaluate the collected data but it also manifested that Green-marketing does possibly entice customers to pay more (GMPECPM). These measured results have distinctly stunned the fundamental assumption in the traditional green-marketing research field that customers were supposed to be willing to pay more for green products and services because they were supporting green initiatives and helping environmental-protection. Further, major future research directions were also briefly demonstrated in this research as (1) the collection data have to be strengthened to gather more empirical customer feedback, corporate management comments, and professional scholars’ reports; (2) enterprises have to resoundingly establish a green-branding initiative after successfully executing green-marketing strategies.Green Marketing (G-marketing); Multiple Criteria Decision Making (MCDM); Analytical Network Process (F-ANP).