Improvement On Transient Response Of Pneumatic Grasper Robot Positioning Using Deadzone Compensator

This project presents the design and modeling dead zone compensator with the close-loop control of pneumatic robot grasper unit. Pneumatic system is a very common devices in industrial automation application due to the advantage such as easy and simple maintenance. However, there are some challenges and limitation in application due to its non-linearities with uncertain behavior including dead zone influences. Dead zone is referring certain input control valve values give no response to the valve operations as the pressure flow is blocked. Therefore, this study has taken initiative to propose the method to compensate with the dead zone effect such by using inverse dead zone function approaches. The identification works are done to identifying the characteristic of the pneumatic system used on the targeted platform; tri-finger pneumatic grippers (TPG). Moreover, the data from dead zone analysis was used to design the compensator equation and apply to the PID controller as selected controller. The result shows that the offset value is close to the center, and the dead zone values on both sides are balanced. The proposed compensator. The experiment carried on targeted platform to validate the proposed compensator with the controller without the compensator. The result shows that the PID control system with compensator have improved the transient response of a fingertip positioning for the TPG system

Control Of Rigid Robots With Large Uncertainties Using The Function Approximation Technique

This dissertation focuses on the control of rigid robots that cannot easily be modeled due to complexity and large uncertainties. The function approximation technique (FAT), which represents uncertainties as finite linear combinations of orthonormal basis functions, provides an alternate form of robot control - in situations where the dynamic equation cannot easily be modeled - with no dependency on the use of model information or training data. This dissertation has four aims - using the FAT - to improve controller efficiency and robustness in scenarios where reliable mathematical models cannot easily be derived or are otherwise unavailable. The first aim is to analyze the uncertain combination of a test robot and prosthesis in a scenario where the test robot and prosthesis are adequately controlled by different controllers - this is tied to efficiency. We develop a hybrid FAT controller, theoretically prove stability, and verify its performance using computer simulations. We show that systematically combining controllers can improve controller analysis and yield desired performance. In the second aim addressed in this dissertation, we investigate the simplification of the adaptive FAT controller complexity for ease of implementation - this is tied to efficiency. We achieve this by applying the passivity property and prove controller stability. We conduct computer simulations on a rigid robot under good and poor initial conditions to demonstrate the effectiveness of the controller. For an n degrees of freedom (DOFs) robot, we see a reduction of controller tuning parameters by 2n. The third aim addressed in this dissertation is the extension of the adaptive FAT controller to the robust control framework - this is tied to robustness. We invent a novel robust controller based on the FAT that uses continuous switching laws and eliminates the dependency on update laws. The controller, when compared against three state-of-the-art controllers via computer simulations and experimental tests on a rigid robot, shows good performance and robustness to fast time-varying uncertainties and random parameter perturbations. This introduces the first purely robust FAT-based controller. The fourth and final aim addressed in this dissertation is the development of a more compact form of the robust FAT controller developed in aim~3 - this is tied to efficiency and robustness. We investigate the simplification of the control structure and its applicability to a broader class of systems that can be modeled via the state-space approach. Computer simulations and experimental tests on a rigid robot demonstrate good controller performance and robustness to fast time-varying uncertainties and random parameter perturbations when compared to the robust FAT controller developed in aim 3. For an n-DOF robot, we see a reduction in the number of switching laws from 3 to 1

Teleoperation control based on combination of wave variable and neural networks

In this paper, a novel control scheme is developed for a teleoperation system, combining the radial basis function (RBF) neural networks (NNs) and wave variable technique to simultaneously compensate for the effects caused by communication delays and dynamics uncertainties. The teleoperation system is set up with a TouchX joystick as the master device and a simulated Baxter robot arm as the slave robot. The haptic feedback is provided to the human operator to sense the interaction force between the slave robot and the environment when manipulating the stylus of the joystick. To utilize the workspace of the telerobot as much as possible, a matching process is carried out between the master and the slave based on their kinematics models. The closed loop inverse kinematics method and RBF NN approximation technique are seamlessly integrated in the control design. To overcome the potential instability problem in the presence of delayed communication channels, wave variables and their corrections are effectively embedded into the control system, and Lyapunov-based analysis is performed to theoretically establish the closed-loop stability. Comparative experiments have been conducted for a trajectory tracking task, under the different conditions of various communication delays. Experimental results show that in terms of tracking performance and force reflection, the proposed control approach shows superior performance over the conventional methods