Development of optical microchip sensor for biomolecule detection

Optical sensors play vital roles in many applications in today’s world. Photonic technologies used to design and engineer optical sensing platforms can provide distinctive advantages over conventional detection techniques. For instance, when compared to electronic and magnetic sensing systems, optical sensors require physically smaller equipment and have the capability for delivering more analytical information (e.g. spectroscopic signatures). In addition, demand for low-cost and portable bio-analyte detections is a growing area for applications in healthcare and environmental fields. Among other factors to achieve reliable results in terms of selectivity and sensitivity is key for the detection of bio-analytes with analytical relevance. Commonly used bio-analytical techniques (e. g. high performance liquid chromatography) have been appropriately designed based on qualitative and quantitative analysis. However, the requirement of expensive equipment, and complexity of procedures (e.g. biomolecule labelling, calibrations, etc.) restrict the board applicability and growth of these techniques in the field of biosensing. Optical sensors tackle these problems because they enable selective and sensitive detection of analytes of interest with label-free, real-time, and cost-effective processes. Among them, optical interferometry is increasingly popular due label-free detection, simple optical platforms and low-cost design. An ideal substrate with high surface area as well as biological/chemical stability against degradation can enable the development of advanced analytical tools with broad applicability. Nanoporous anodic alumina has been recently envisaged as a powerful platform to develop label-free optical sensors in combination with different optical techniques. This thesis presents a high sensitive label-free biosensor design combining nanoporous anodic alumina (NAA) photonic structures and reflectometric interference spectroscopy (RIfS) for biomedical, food and agricultural applications. NAA is a suitable optical sensing platform due to its optical properties; a high surface area; its straightforward, scalable, and cost-competitive fabrication process, and its chemical and mechanical stability towards biological environments. Our biosensor enables real-time screening of any absorption and desorption event occurring inside the NAA pores. A proper selection of bio-analytes were able to be detected using this platform which offers unique feature in terms of simplicity and accuracy. The most relevant components of this thesis are categorised as below: 1. Self-ordered NAA fabrication and detection of an enzymatic analyte as a biomarker for cancer diagnosis: Fabrication of NAA photonic films using two step electrochemical anodization and chemical functionalisation. Detection of trace levels of analyte enzyme and its quantification by selective digestion. The NAA photonic film with the enzyme acts as a promising combination for a real-time point-of-care monitoring system for early stages of disease. 2. NAA rugate filters used to establish the binding affinity between blood proteins and drugs: Design, fabrication, and optimisation of NAA anodization parameters using sinusoidal pulse anodization approach (i.e. anodization offset and anodization period) to produce rugate filter photonic crystals that provide two comparative sensing parameters. Establishment of highly sensitive and selective device capable for drug binding assessments linked to treating a wide range of medical conditions. 3. NAA bilayers and food bioactive compound detection: Design, fabrication, and optimisation of NAA anodization parameters (i.e. anodization time and number of anodization steps) to obtain NAA bilayered photonic structures that display the effective response of NAA geometry with different types of nano-pore engineering. The photonic properties of the NAA bilayer were studied at each layer of nano-structure under specific binding of human serum albumin and quercetin as target agent. 4. Single nucleotide polymorphism (SNP) detection: The design and implementation of a Ligation-Rolling Circle Amplification assay to detect a single nucleotide polymorphism associated with insecticide resistance in a pest beetle species, Tribolium castaneum. This proof-of-concept SNP detection assay has the potential to provide a method compatible with a biosensor platform such as NAA. This demonstrates the first step towards the potential development of a genotyping biosensor, and a real-world application of insect insecticide resistance monitoring. The results presented in this thesis are expected to enable innovative developments on NAA sensing technology that could result in highly sensitive and selective detection systems for a broad range of bio-analytes detections.Thesis (Ph.D.) (Research by Publication) -- University of Adelaide, School of Chemical Engineering, 201

Synthesis Of ZnO and TiO2 By Biomimetization Of Eggshell Membranes And Its Evaluation As Anode In Dye-Sensitized Solar Cells

Esta tesis presenta un conjunto original de procedimientos para la síntesis de nanoestructuras de TiO2 y ZnO por biomimetización de membranas de cáscara de huevo obteniendo materiales valiosos para fotovoltaica como se muestra en su evaluación de rendimiento como ánodo en células solares sensibilizadas por colorante. "El manuscrito está dividido en 7 capítulos. En el primer capítulo, titulado Introducción, se presentan las bases teóricas para la comprensión de los procesos de biomimetización, membranas de cáscara de huevo, síntesis de ZnO y TiO2, y células solares sensibilizadas por colorantes (DSSC). Después del capítulo introductorio, el Capítulo 2 revela los objetivos generales y específicos de esta investigación. Posteriormente, el Capítulo 3 describe el procedimiento experimental utilizado para las síntesis y caracterizaciones de ZnO y TiO2, así como el procedimiento utilizado en el ensamblaje y la caracterización de las células fotovoltaicas. En el capítulo 4 se presentan y discuten los resultados obtenidos con las síntesis y la aplicación de los polvos como fotodoles en DSSC. En este capítulo, hemos decidido subdividirlo en secciones específicas para explicar cuestiones científicas específicas sobre el tema. En el capítulo 5 se presentan las conclusiones del estudio en vista de los diferentes aspectos: obtención de TiO2 biomimético y ZnO, diferencias entre los polvos sintetizados por biomimetización de las membranas de cáscara de huevo, y la caracterización de las células construidas con los polvos biomiméticos.Esta tesi presenta un conjunt original de procediments per a la síntesi de nanoestructuras de TiO2 i ZnO per biomimetización de membranes de corfa d'ou obtenint materials valuosos per a fotovoltaica com es mostra en la seua avaluació de rendiment com a ànode en cèl·lules solars sensibilitzades per colorant. "El manuscrit està dividit en 7 capítols. En el primer capítol, titulat Introducció, es presenten les bases teòriques per a la comprensió dels processos de biomimetización, membranes de corfa d'ou, síntesi de ZnO i TiO2, i cèl·lules solars sensibilitzades per colorants (DSSC) . Després del capítol introductori, el Capítol 2 revela els objectius generals i específics d'esta investigació. Posteriorment, el Capítol 3 descriu el procediment experimental utilitzat per a les síntesis i caracteritzacions de ZnO i TiO2, així com el procediment utilitzat en l'acoblament i la caracterització de les cèl·lules fotovoltaiques. En el capítol 4 es presenten i discutixen els resultats obtinguts amb les síntesis i l'aplicació de les pols com fotodoles en DSSC. En este capítol, hem decidit subdividir-ho en seccions específiques per a explicar qüestions científiques específiques sobre el tema. En el capítol 5 es presenten les conclusions de l'estudi en vista dels diferents aspectes: obtenció de TiO2 biomimético i ZnO, diferències entre les pols sintetitzats per biomimetización de les membranes de corfa d'ou, i la caracterització de les cèl·lules construïdes amb les pols biomiméticos.This thesis introduces an original set of procedures for the Synthesis of ZnO and TiO2 nanostructures by biomimetization of eggshell membranes obtaining valuable materiales for photovoltaic as shown on their performance evaluation as anode in Dye-Sensitized Solar Cells". The manuscript is divided into 7 chapters. In the first chapter, entitled Introduction, it is presented the theoretical bases for the understanding of the biomimetization processes, eggshell membranes, ZnO and TiO2 syntheses, and dye-sensitized solar cells (DSSC). After the introductory chapter, Chapter 2 reveals the general and specific objectives of this research. Subsequently, Chapter 3 describes the experimental procedure used for the syntheses and characterizations of ZnO and TiO2 as well as the procedure used in the assembly and characterization of the photovoltaic cells. In chapter 4 are presented and discussed the results obtained with the syntheses and application of the powders as photoanodes in DSSC. In this chapter, we have chosen to subdivide it into specific sections to explain specific scientific issues on the subject. In chapter 5 the conclusions of the study are presented in view of the different aspects: obtaining ZnO and biomimetic TiO2, differences between the powders synthesized by biomimetization of eggshell membranes, and the characterization of the cells constructed with the biomimetic powders.Camaratta, R. (2018). Synthesis Of ZnO and TiO2 By Biomimetization Of Eggshell Membranes And Its Evaluation As Anode In Dye-Sensitized Solar Cells [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/113416TESI

Quantitative magnetophoresis of micro and nano particles

Micro- and nanoscale magnetic particles are becoming increasingly utilized in a variety of settings. Magnetophoresis is commonly used in diagnostic devices, research applications, and medicinal science. The applications of magnetophoresis in drug delivery, gene transfection, and hyperthermic treatment of tumours are in the initial phases of development. While a large body of work in magnetophoresis exists, here are few reports of the relevant magnetophoretic parameters of a system being quantitatively correlated with driven particle mobility. The relationships between the size, shape, and magnetic properties of the particles, the applied magnetic field, and the viscosity of the medium are relevant to particle magnetophoresis and the design of magnetophoretic systems. The investigation described here begins with the room temperature magnetic characterization of the three particles used: commercial beads, nanorods, and for the first time ferritin. Ferritin is a magnetic protein which has been used extensively in a research context for labelling biological particles, however such systems have not been quantifiably characterized to enable the development of loading/force causal relationships. Here, a model platform was used to correlate for the first time, the quantified ferritin loading, the empirically determined magnetic properties of the ferritin labelled particles, and the magnetophoretic forces. The quantified magnetophoresis of spheres and rods in a model viscous medium and shear thinning polymer networks was performed for the first time. This investigation also represents the first report of particle shear thinning of DNA. The decreasing viscosity experienced by the particles in DNA points toward potential implications for considering the benefits of particle induced shear thinning in the designing of magnetic particle drug delivery systems. In the final investigation, the results of the previous chapters are brought together in the fabrication and magnetophoresis of a novel, ferritin based, rod shaped, biocompatible, nanoparticles. For the first time, magnetophoresis of the nanoparticles is demonstrated and validated by spatially resolved Raman spectroscopic analysis of the magnetically concentrated material. This dual component magnetic particle has potential application in the fabrication of new functionally graded biomaterials and drug and gene delivery

USE OF HIGH SURFACE NANOFIBROUS MATERIALS IN MEDICINE

n/

Recent advances in the catalytic oxidation of volatile organic compounds: a review based on pollutant sorts and sources

It is well known that urbanization and industrialization have resulted in the rapidly increasing emissions of volatile organic compounds (VOCs), which are a major contributor to the formation of secondary pollutants (e.g., tropospheric ozone, PAN (peroxyacetyl nitrate), and secondary organic aerosols) and photochemical smog. The emission of these pollutants has led to a large decline in air quality in numerous regions around the world, which has ultimately led to concerns regarding their impact on human health and general well-being. Catalytic oxidation is regarded as one of the most promising strategies for VOC removal from industrial waste streams. This Review systematically documents the progresses and developments made in the understanding and design of heterogeneous catalysts for VOC oxidation over the past two decades. It addresses in detail how catalytic performance is often drastically affected by the pollutant sources and reaction conditions. It also highlights the primary routes for catalyst deactivation and discusses protocols for their subsequent reactivation. Kinetic models and proposed oxidation mechanisms for representative VOCs are also provided. Typical catalytic reactors and oxidizers for industrial VOC destruction are further discussed. We believe that this Review will provide a great foundation and reference point for future design and development in this field