1,587 research outputs found

    Chemical and biological reactions of solidification of peat using ordinary portland cement (OPC) and coal ashes

    Get PDF
    Construction over peat area have often posed a challenge to geotechnical engineers. After decades of study on peat stabilisation techniques, there are still no absolute formulation or guideline that have been established to handle this issue. Some researchers have proposed solidification of peat but a few researchers have also discovered that solidified peat seemed to decrease its strength after a certain period of time. Therefore, understanding the chemical and biological reaction behind the peat solidification is vital to understand the limitation of this treatment technique. In this study, all three types of peat; fabric, hemic and sapric were mixed using Mixing 1 and Mixing 2 formulation which consisted of ordinary Portland cement, fly ash and bottom ash at various ratio. The mixtures of peat-binder-filler were subjected to the unconfined compressive strength (UCS) test, bacterial count test and chemical elemental analysis by using XRF, XRD, FTIR and EDS. Two pattern of strength over curing period were observed. Mixing 1 samples showed a steadily increase in strength over curing period until Day 56 while Mixing 2 showed a decrease in strength pattern at Day 28 and Day 56. Samples which increase in strength steadily have less bacterial count and enzymatic activity with increase quantity of crystallites. Samples with lower strength recorded increase in bacterial count and enzymatic activity with less crystallites. Analysis using XRD showed that pargasite (NaCa2[Mg4Al](Si6Al2)O22(OH)2) was formed in the higher strength samples while in the lower strength samples, pargasite was predicted to be converted into monosodium phosphate and Mg(OH)2 as bacterial consortium was re-activated. The Michaelis�Menten coefficient, Km of the bio-chemical reaction in solidified peat was calculated as 303.60. This showed that reaction which happened during solidification work was inefficient. The kinetics for crystallite formation with enzymatic effect is modelled as 135.42 (1/[S] + 0.44605) which means, when pargasite formed is lower, the amount of enzyme secretes is higher

    Metaheuristic design of feedforward neural networks: a review of two decades of research

    Get PDF
    Over the past two decades, the feedforward neural network (FNN) optimization has been a key interest among the researchers and practitioners of multiple disciplines. The FNN optimization is often viewed from the various perspectives: the optimization of weights, network architecture, activation nodes, learning parameters, learning environment, etc. Researchers adopted such different viewpoints mainly to improve the FNN's generalization ability. The gradient-descent algorithm such as backpropagation has been widely applied to optimize the FNNs. Its success is evident from the FNN's application to numerous real-world problems. However, due to the limitations of the gradient-based optimization methods, the metaheuristic algorithms including the evolutionary algorithms, swarm intelligence, etc., are still being widely explored by the researchers aiming to obtain generalized FNN for a given problem. This article attempts to summarize a broad spectrum of FNN optimization methodologies including conventional and metaheuristic approaches. This article also tries to connect various research directions emerged out of the FNN optimization practices, such as evolving neural network (NN), cooperative coevolution NN, complex-valued NN, deep learning, extreme learning machine, quantum NN, etc. Additionally, it provides interesting research challenges for future research to cope-up with the present information processing era

    Chaotic Time Series Forecasting Using Higher Order Neural Networks

    Get PDF
    This study presents a novel application and comparison of higher order neural networks (HONNs) to forecast benchmark chaotic time series. Two models of HONNs were implemented, namely functional link neural network (FLNN) and pi-sigma neural network (PSNN). These models were tested on two benchmark time series; the monthly smoothed sunspot numbers and the Mackey-Glass time-delay differential equation time series. The forecasting performance of the HONNs is compared against the performance of different models previously used in the literature such as fuzzy and neural networks models. Simulation results showed that FLNN and PSNN offer good performance compared to many previously used hybrid models

    A Review of Harmful Algal Bloom Prediction Models for Lakes and Reservoirs

    Get PDF
    Anthropogenic activity has led to eutrophication in water bodies across the world. This eutrophication promotes blooms, cyanobacteria being among the most notorious bloom organisms. Cyanobacterial blooms (more commonly referred to as harmful algal blooms (HABs)) can devastate an ecosystem. Cyanobacteria are resilient microorganisms that have adapted to survive under a variety of conditions, often outcompeting other phytoplankton. Some species of cyanobacteria produce toxins that ward off predators. These toxins can negatively affect the health of the aquatic life, but also can impact animals and humans that drink or come in contact with these noxious waters. Although cyanotoxin’s effects on humans are not as well researched as the growth, behavior, and ecological niche of cyanobacteria, their health impacts are of large concern. It is important that research to mitigate and understand cyanobacterial blooms and cyanotoxin production continues. This project supports continued research by addressing an approach to collect and summarize published articles that focus on techniques and models to predict cyanobacterial blooms with the goal of understanding what research has been done to promote future work. The following report summarizes 34 articles from 2003 to 2020 that each describe a mechanistic or data driven model developed to predict the occurrence of cyanobacterial blooms or the presence of cyanotoxins in lakes or reservoirs with similar climates to Utah. These articles showed a shift from more mechanistic approaches to more data driven approaches with time. This resulted in a more individualistic approach to modeling, meaning that models are often produced for a single lake or reservoir and are not easily comparable to other models for different systems

    Pre-bcc: a novel integrated machine learning framework for predicting mechanical and durability properties of blended cement concrete

    Get PDF
    Partially replacing ordinary Portland cement (OPC) with low-carbon supplementary cementitious materials (SCMs) in blended cement concrete (BCC) is perceived as the most promising route for sustainable concrete production. Despite having a lower environmental impact, BCC could exhibit performance inferior to OPC in design-governing functional properties. Hence, concrete manufacturers and scientists have been seeking methods to predict the performance of BCC mixes in order to reduce the cost and time of experimentally testing all alternatives. Machine learning algorithms have been proven in other fields for treating large amounts of data drawing meaningful relationships between data accurately. However, the existing prediction models in the literature come short in covering a wide range of SCMs and/or functional properties. Considering this, in this study, a non-linear multi-layered machine learning regression model was created to predict the performance of a BCC mix for slump, strength, and resistance to carbonation and chloride ingress based on any of five prominent SCMs: fly ash, ground granulated blast furnace slag, silica fume, lime powder and calcined clay. A database from>150 peer-reviewed sources containing>1650 data points was created to train and test the model. The statistical performance was found to be comparable to that of existing models (R = 0.94–0.97). For the first time, the model, Pre-bcc, was also made available online for users to conduct their own prediction studies.Peer ReviewedPostprint (published version

    Efficient Learning Machines

    Get PDF
    Computer scienc

    A intelligent particle swarm optimization for short-term traffic flow forecasting using on-road sensor systems

    Get PDF
    On-road sensor systems installed on freeways are used to capture traffic flow data for short-term traffic flow predictors for traffic management, in order to reduce traffic congestion and improve vehicular mobility. This paper intends to tackle the impractical time-invariant assumptions which underlie the methods currently used to develop short-term traffic flow predictors: i) the characteristics of current data captured by on-road sensors are assumed to be time-invariant with respect to those of the historical data, which is used to developed short-term traffic flow predictors; and ii) the configuration of the on-road sensor systems is assumed to be time-invariant. In fact, both assumptions are impractical in the real world, as the current traffic flow characteristics can be very different from the historical ones, and also the on-road sensor systems are time-varying in nature due to damaged sensors or component wear. Therefore, misleading forecasting results are likely to be produced when short-term traffic flow predictors are designed using these two time-invariant assumptions. To tackle these time-invariant assumptions, an intelligent particle swarm optimization algorithm, namely IPSO, is proposed to develop short-term traffic flow predictors by integrating the mechanisms of particle swarm optimization, neural network and fuzzy inference system, in order to adapt to the time-varying traffic flow characteristics and the time-varying configurations of the on-road sensor systems. The proposed IPSO was applied to forecast traffic flow conditions on a section of freeway in Western Australia, whose traffic flow information can be captured on-line by the on-road sensor system. These results clearly demonstrate the effectiveness of using the proposed IPSO for real-time traffic flow forecasting based on traffic flow data captured by on-road sensor systems

    A Comprehensive Survey on Pi-Sigma Neural Network for Time Series Prediction

    Get PDF
    Prediction of time series grabs received much attention because of its effect on the vast range of real life applications. This paper presents a survey of time series applications using Higher Order Neural Network (HONN) model. The basic motivation behind using HONN is the ability to expand the input space, to solve complex problems it becomes more efficient and perform high learning abilities of the time series forecasting. Pi-Sigma Neural Network (PSNN) includes indirectly the capabilities of higher order networks using product cells as the output units and less number of weights. The goal of this research is to present the reader awareness about PSNN for time series prediction, to highlight some benefits and challenges using PSNN. Possible fields of PSNN applications in comparison with existing methods are presented and future directions are also explored in advantage with the properties of error feedback and recurrent networks

    Swarm Intelligence

    Get PDF
    Swarm Intelligence has emerged as one of the most studied artificial intelligence branches during the last decade, constituting the fastest growing stream in the bio-inspired computation community. A clear trend can be deduced analyzing some of the most renowned scientific databases available, showing that the interest aroused by this branch has increased at a notable pace in the last years. This book describes the prominent theories and recent developments of Swarm Intelligence methods, and their application in all fields covered by engineering. This book unleashes a great opportunity for researchers, lecturers, and practitioners interested in Swarm Intelligence, optimization problems, and artificial intelligence
    • …
    corecore