A GROWTH-BASED APPROACH TO THE AUTOMATIC GENERATION OF NAVIGATION MESHES

Providing an understanding of space in game and simulation environments is one of the major challenges associated with moving artificially intelligent characters through these environments. The usage of some form of navigation mesh has become the standard method to provide a representation of the walkable space in game environments to characters moving around in that environment. There is currently no standardized best method of producing a navigation mesh. In fact, producing an optimal navigation mesh has been shown to be an NP-Hard problem. Current approaches are a patchwork of divergent methods all of which have issues either in the time to create the navigation meshes (e.g., the best looking navigation meshes have traditionally been produced by hand which is time consuming), generate substandard quality navigation meshes (e.g., many of the automatic mesh production algorithms result in highly triangulated meshes that pose problems for character navigation), or yield meshes that contain gaps of areas that should be included in the mesh and are not (e.g., existing growth-based methods are unable to adapt to non-axis-aligned geometry and as such tend to provide a poor representation of the walkable space in complex environments). We introduce the Planar Adaptive Space Filling Volumes (PASFV) algorithm, Volumetric Adaptive Space Filling Volumes (VASFV) algorithm, and the Iterative Wavefront Edge Expansion Cell Decomposition (Wavefront) algorithm. These algorithms provide growth-based spatial decompositions for navigation mesh generation in either 2D (PASFV) or 3D (VASFV). These algorithms generate quick (on demand) decompositions (Wavefront), use quad/cube base spatial structures to provide more regular regions in the navigation mesh instead of triangles, and offer full coverage decompositions to avoid gaps in the navigation mesh by adapting to non-axis-aligned geometry. We have shown experimentally that the decompositions offered by PASFV and VASFV are superior both in character navigation ability, number of regions, and coverage in comparison to the existing and commonly used techniques of Space Filling Volumes, Hertel-Melhorn decomposition, Delaunay Triangulation, and Automatic Path Node Generation. Finally, we show that our Wavefront algorithm retains the superior performance of the PASFV and VASFV algorithms while providing faster decompositions that contain fewer degenerate and near degenerate regions. Unlike traditional navigation mesh generation techniques, the PASFV and VASFV algorithms have a real time extension (Dynamic Adaptive Space Filling Volumes, DASFV) which allows the navigation mesh to adapt to changes in the geometry of the environment at runtime. In addition, it is possible to use a navigation mesh for applications above and beyond character path planning and navigation. These multiple uses help to increase the return on the investment in creating a navigation mesh for a game or simulation environment. In particular, we will show how to use a navigation mesh for the acceleration of collision detection

Diamond-based models for scientific visualization

Hierarchical spatial decompositions are a basic modeling tool in a variety of application domains including scientific visualization, finite element analysis and shape modeling and analysis. A popular class of such approaches is based on the regular simplex bisection operator, which bisects simplices (e.g. line segments, triangles, tetrahedra) along the midpoint of a predetermined edge. Regular simplex bisection produces adaptive simplicial meshes of high geometric quality, while simplifying the extraction of crack-free, or conforming, approximations to the original dataset. Efficient multiresolution representations for such models have been achieved in 2D and 3D by clustering sets of simplices sharing the same bisection edge into structures called diamonds. In this thesis, we introduce several diamond-based approaches for scientific visualization. We first formalize the notion of diamonds in arbitrary dimensions in terms of two related simplicial decompositions of hypercubes. This enables us to enumerate the vertices, simplices, parents and children of a diamond. In particular, we identify the number of simplices involved in conforming updates to be factorial in the dimension and group these into a linear number of subclusters of simplices that are generated simultaneously. The latter form the basis for a compact pointerless representation for conforming meshes generated by regular simplex bisection and for efficiently navigating the topological connectivity of these meshes. Secondly, we introduce the supercube as a high-level primitive on such nested meshes based on the atomic units within the underlying triangulation grid. We propose the use of supercubes to associate information with coherent subsets of the full hierarchy and demonstrate the effectiveness of such a representation for modeling multiresolution terrain and volumetric datasets. Next, we introduce Isodiamond Hierarchies, a general framework for spatial access structures on a hierarchy of diamonds that exploits the implicit hierarchical and geometric relationships of the diamond model. We use an isodiamond hierarchy to encode irregular updates to a multiresolution isosurface or interval volume in terms of regular updates to diamonds. Finally, we consider nested hypercubic meshes, such as quadtrees, octrees and their higher dimensional analogues, through the lens of diamond hierarchies. This allows us to determine the relationships involved in generating balanced hypercubic meshes and to propose a compact pointerless representation of such meshes. We also provide a local diamond-based triangulation algorithm to generate high-quality conforming simplicial meshes

Constrained Statistical Modelling of Knee Flexion from Multi-Pose Magnetic Resonance Imaging

© 1982-2012 IEEE.Reconstruction of the anterior cruciate ligament (ACL) through arthroscopy is one of the most common procedures in orthopaedics. It requires accurate alignment and drilling of the tibial and femoral tunnels through which the ligament graft is attached. Although commercial computer-Assisted navigation systems exist to guide the placement of these tunnels, most of them are limited to a fixed pose without due consideration of dynamic factors involved in different knee flexion angles. This paper presents a new model for intraoperative guidance of arthroscopic ACL reconstruction with reduced error particularly in the ligament attachment area. The method uses 3D preoperative data at different flexion angles to build a subject-specific statistical model of knee pose. To circumvent the problem of limited training samples and ensure physically meaningful pose instantiation, homogeneous transformations between different poses and local-deformation finite element modelling are used to enlarge the training set. Subsequently, an anatomical geodesic flexion analysis is performed to extract the subject-specific flexion characteristics. The advantages of the method were also tested by detailed comparison to standard Principal Component Analysis (PCA), nonlinear PCA without training set enlargement, and other state-of-The-Art articulated joint modelling methods. The method yielded sub-millimetre accuracy, demonstrating its potential clinical value

Detail Enhancing Denoising of Digitized 3D Models from a Mobile Scanning System

The acquisition process of digitizing a large-scale environment produces an enormous amount of raw geometry data. This data is corrupted by system noise, which leads to 3D surfaces that are not smooth and details that are distorted. Any scanning system has noise associate with the scanning hardware, both digital quantization errors and measurement inaccuracies, but a mobile scanning system has additional system noise introduced by the pose estimation of the hardware during data acquisition. The combined system noise generates data that is not handled well by existing noise reduction and smoothing techniques. This research is focused on enhancing the 3D models acquired by mobile scanning systems used to digitize large-scale environments. These digitization systems combine a variety of sensors – including laser range scanners, video cameras, and pose estimation hardware – on a mobile platform for the quick acquisition of 3D models of real world environments. The data acquired by such systems are extremely noisy, often with significant details being on the same order of magnitude as the system noise. By utilizing a unique 3D signal analysis tool, a denoising algorithm was developed that identifies regions of detail and enhances their geometry, while removing the effects of noise on the overall model. The developed algorithm can be useful for a variety of digitized 3D models, not just those involving mobile scanning systems. The challenges faced in this study were the automatic processing needs of the enhancement algorithm, and the need to fill a hole in the area of 3D model analysis in order to reduce the effect of system noise on the 3D models. In this context, our main contributions are the automation and integration of a data enhancement method not well known to the computer vision community, and the development of a novel 3D signal decomposition and analysis tool. The new technologies featured in this document are intuitive extensions of existing methods to new dimensionality and applications. The totality of the research has been applied towards detail enhancing denoising of scanned data from a mobile range scanning system, and results from both synthetic and real models are presented

Deformable Shape Completion with Graph Convolutional Autoencoders

The availability of affordable and portable depth sensors has made scanning objects and people simpler than ever. However, dealing with occlusions and missing parts is still a significant challenge. The problem of reconstructing a (possibly non-rigidly moving) 3D object from a single or multiple partial scans has received increasing attention in recent years. In this work, we propose a novel learning-based method for the completion of partial shapes. Unlike the majority of existing approaches, our method focuses on objects that can undergo non-rigid deformations. The core of our method is a variational autoencoder with graph convolutional operations that learns a latent space for complete realistic shapes. At inference, we optimize to find the representation in this latent space that best fits the generated shape to the known partial input. The completed shape exhibits a realistic appearance on the unknown part. We show promising results towards the completion of synthetic and real scans of human body and face meshes exhibiting different styles of articulation and partiality.Comment: CVPR 201

Automated sequence and motion planning for robotic spatial extrusion of 3D trusses

While robotic spatial extrusion has demonstrated a new and efficient means to fabricate 3D truss structures in architectural scale, a major challenge remains in automatically planning extrusion sequence and robotic motion for trusses with unconstrained topologies. This paper presents the first attempt in the field to rigorously formulate the extrusion sequence and motion planning (SAMP) problem, using a CSP encoding. Furthermore, this research proposes a new hierarchical planning framework to solve the extrusion SAMP problems that usually have a long planning horizon and 3D configuration complexity. By decoupling sequence and motion planning, the planning framework is able to efficiently solve the extrusion sequence, end-effector poses, joint configurations, and transition trajectories for spatial trusses with nonstandard topologies. This paper also presents the first detailed computation data to reveal the runtime bottleneck on solving SAMP problems, which provides insight and comparing baseline for future algorithmic development. Together with the algorithmic results, this paper also presents an open-source and modularized software implementation called Choreo that is machine-agnostic. To demonstrate the power of this algorithmic framework, three case studies, including real fabrication and simulation results, are presented.Comment: 24 pages, 16 figure