A Study on the Integration of a High-Speed Flywheel as an Energy Storage Device in Hybrid Vehicles

The last couple of decades have seen the rise of the hybrid electric vehicle as a compromise between the outstanding specific energy of petrol fuels and its low-cost technology, and the zero tail-gate emissions of the electric vehicle. Despite this, considerable reductions in cost and further increases in fuel economy are needed for their widespread adoption. An alternative low-cost energy storage technology for vehicles is the high-speed flywheel. The flywheel has important limitations that exclude it from being used as a primary energy source for vehicles, but its power characteristics and low-cost materials make it a powerful complement to a vehicle's primary propulsion system. This thesis presents an analysis on the integration of a high-speed flywheel for use as a secondary energy storage device in hybrid vehicles. Unlike other energy storage technologies, the energy content of the flywheel has a direct impact on the velocity of transmission. This presents an important challenge, as it means that the flywheel must be able to rotate at a speed independent of the vehicle's velocity and therefore it must be coupled via a variable speed transmission. This thesis presents some practical ways in which to accomplish this in conventional road vehicles, namely with the use of a variator, a planetary gear set or with the use of a power-split continuously variable transmission. Fundamental analyses on the kinematic behaviour of these transmissions particularly as they pertain to flywheel powertrains are presented. Computer simulations were carried out to compare the performance of various transmissions, and the models developed are presented as well. Finally the thesis also contains an investigation on the driving and road conditions that have the most beneficial effect on hybrid vehicle performance, with a particular emphasis on the effect that the road topography has on fuel economy and the significance of this

An investigation into hybrid power trains for vehicles with regenerative braking

Imperial Users onl

Hybrid vehicle assessment. Phase 1: Petroleum savings analysis

The results of a comprehensive analysis of near term electric hybrid vehicles are presented, with emphasis on their potential to save significant amounts of petroleum on a national scale in the 1990s. Performance requirements and expected annual usage patterns of these vehicles are first modeled. The projected U.S. fleet composition is estimated, and conceptual hybrid vehicle designs are conceived and analyzed for petroleum use when driven in the expected annual patterns. These petroleum consumption estimates are then compared to similar estimates for projected 1990 conventional vehicles having the same performance and driven in the same patterns. Results are presented in the form of three utility functions and comparisons of sevral conceptual designs are made. The Hybrid Vehicle (HV) design and assessment techniques are discussed and a general method is explained for selecting the optimum energy management strategy for any vehicle mission battery combination. Conclusions and recommendations are presented, and development recommendations are identified

Influence of Architecture Design on the Performance and Fuel Efficiency of Hydraulic Hybrid Transmissions

Hydraulic hybrids are a proven and effective alternative to electric hybrids for increasing the fuel efficiency of on-road vehicles. To further the state-of-the-art this work investigates how architecture design influences the performance, fuel efficiency, and controllability of hydraulic hybrid transmissions. To that end a novel neural network based power management controller was proposed and investigated for conventional hydraulic hybrids. This control scheme trained a neural network to generalize the globally optimal, though non-implementable, state trajectories generated by dynamic programming. Once trained the neural network was used for online prediction of a transmission’s optimal state trajectory during untrained cycles forming the basis of an implementable controller. During hardware-in-the-loop (HIL) testing the proposed control strategy improved fuel efficiency by up to 25.5% when compared with baseline approaches. To further improve performance and fuel efficiency a novel transmission architecture termed a Blended Hydraulic Hybrid was proposed and investigated. This novel architecture improves on existing hydraulic hybrids by partially decoupling power transmission from energy storage while simultaneously providing means to recouple the systems when advantageous. Optimal control studies showed the proposed architecture improved fuel efficiency over both baseline mechanical and conventional hydraulic hybrid transmissions. Effective system level and supervisory control schemes were also proposed for the blended hybrid. In order to investigate the concept’s feasibility a blended hybrid transmission was constructed and successfully tested on a HIL transmission dynamometer. Finally to investigate controllability and driver perception an SUV was retrofitted with a blended hybrid transmission. Successful on-road vehicle testing showcased the potential of this novel hybrid architecture as a viable alternative to more conventional electric hybrids in the transportation sector

Lightweight High-Efficiency Power Train Propulsion with Axial- Flux Machines for Electric or Hybrid Vehicles

The aim of this chapter is to present a new type of powertrain with dimensions and low weight, for vehicles with reduced carbon emissions, which have an axial synchronous machine with one stator and two rotor, with static converter that is simple and inexpensive, a broadcast transmission system using an electric differential, with the control of the two rotors so that they can operate as motor/generator, at the same rotational direction or in opposite directions, at the same speed value, at slightly different speeds or at much different speeds by using an original dual vector control with operating on dual frequency. This is a major concern of hybrid and electric vehicle manufacturers. Expected results: a lighter power train with 20% and an increase in 5% of electric drive efficiency, low inertia rotor at high speed, a compact electric drive system with high torque and simple control, intelligent energy management system with a new vision of technological and innovation development, and equal importance of environment protection. The electrical machines for hybrid (HEV) or electric (EV) drives include a variety of different topologies. According to outcomes of literature survey, induction machines alongside synchronous machines take the major place in HEV or EV power trains