Waveform Transition Graphs: a designer-friendly formalism for asynchronous behaviours

The paper proposes a new formal model for describing asynchronous behaviours involving the interplay of causality, concurrency and choice. The model is called Waveform Transition Graphs. Its main aim is simplifying the learning process for industrial engineers in accessing powerful synthesis tools provided for Signal Transition Graphs by sacrificing some of the expressive power of the latter. This formalism is developed based on feedback from engineers of Dialog Semiconductor.Peer ReviewedPostprint (author's final draft

Practical advances in asynchronous design

Journal ArticleRecent practical advances in asynchronous circuit and system design have resulted in renewed interest by circuit designers. Asynchronous systems are being viewed as in increasingly viable alternative to globally synchronous system organization. This tutorial will present the current state of the art in asynchronous circuit and system design in three different areas. The first section details asynchronous control systems. The second describes a variety of approaches to asynchronous datapaths. The third section is on asynchronous and self-timed circuits applied to the design of general purpose processors

Realizing burstmode circuits via STG speed independent synthesis

Journal ArticleThis report discusses the similarities and differences of STG and Burstmode specifications and synthesis methods. The first part of the report examines the applicability and efficiency of STG's single controller fork-join concurrency ability versus Burstmode's partitioned fork-join concurrency approach. Results comparing the synthesis results for designs using the same level of concurrency in the controllers (STG and Burstmode), as well as the different methods of realizing fork-join concurrency, are presented. The second part compares the timing assumptions being made by the SI synthesis algorithms and if they can generate a hazard-free solution under Burstmode burst property and fundamental mode assumptions. This comparison shows that speed independent generalized C-element implementations exhibit hazards under the burst property assumption model and can thus not be used to implement Burstmode controllers. It also shows that the SI standard C-element approach, while complying with the burst property of a legal Burstmode specification, may not generate - from a Burstmode point of view - minimum covers. In addition, timed circuits are analyzed for the same hazard considerations. Timed circuits have the same problems as SI when it comes to Burstmode hazard considerations. An extension to timed circuit synthesis that potentially can reduce the number of entrance violations in a standard C-element implementation significantly is also presented

Synthesis of speed independent circuits based on decomposition

Journal ArticleThis paper presents a decomposition method for speedindependent circuit design that is capable of significantly reducing the cost of synthesis. In particular, this method synthesizes each output individually. It begins by contracting the STG to include only transitions on the output of interest and its trigger signals. Next, the reachable state space for this contracted STG is analyzed to determine a minimal number of additional signals which must be reintroduced into the STG to obtain CSC. The circuit for this output is then synthesized from this STG. Results show that the quality of the circuit implementation is nearly as good as the one found from the full reachable state space, but it can be applied to find circuits for which full state space methods cannot be successfully applied. The proposed method has been implemented as a part of our tool nutas (Nii-Utah Timed Asynchronous circuit Synthesis system), and its very first version is available at http://research.nii.ac.jp/~yoneda. Key Words: Decomposition, synthesis, STGs, abstraction, speed-independent circuits

Verification and synthesis of asynchronous control circuits using petri net unfoldings

PhD ThesisDesign of asynchronous control circuits has traditionally been associated with application of formal methods. Event-based models, such as Petri nets, provide a compact and easy to understand way of specifying asynchronous behaviour. However, analysis of their behavioural properties is often hindered by the problem of exponential growth of reachable state space. This work proposes a new method for analysis of asynchronous circuit models based on Petri nets. The new approach is called PN-unfolding segment. It extends and improves existing Petri nets unfolding approaches. In addition, this thesis proposes a new analysis technique for Signal Transition Graphs along with an efficient verification technique which is also based on the Petri net unfolding. The former is called Full State Graph, the latter - STG-unfolding segment. The boolean logic synthesis is an integral part of the asynchronous circuit design process. In many cases, even if the verification of an asynchronous circuit specification has been performed successfully, it is impossible to obtain its implementation using existing methods because they are based on the reachability analysis. A new approach is proposed here for automated synthesis of speed-independent circuits based on the STG-unfolding segment constructed during the verification of the circuit's specification. Finally, this work presents experimental results showing the need for the new Petri net unfolding techniques and confirming the advantages of application of partial order approach to analysis, verification and synthesis of asynchronous circuits.The Research Committee, Newcastle University: Overseas Research Studentship Award

Practical advances in asynchronous design and in asynchronous/synchronous interfaces

Journal ArticleAsynchronous systems are being viewed as an increasingly viable alternative to purely synchronous systems. This paper gives an overview of the current state of the art in practical asynchronous circuit and system design in four areas: controllers, datapaths, processors, and the design of asynchronous/synchronous interfaces

Synthesis of timed circuits based on decomposition

Journal ArticleAbstract-This paper presents a decomposition-based method for timed circuit design that is capable of significantly reducing the cost of synthesis. In particular, this method synthesizes each output individually. It begins by contracting the timed signal transition graph (STG) to include only transitions on the output of interest and its possible trigger signals. Next, the reachable state space for this contracted STG is analyzed to determine a minimal number of additional signals, which must be reintroduced into the STG to obtain complete state coding. The circuit for this output is then synthesized from this STG. Results show that the quality of the circuit implementation is nearly as good as the one found from the full reachable state space, but it can be applied to find circuits for which full-state-space methods cannot be successfully applied. The proposed method has been implemented as a part of our tool Nii-Utah Timed Asynchronous circuit Synthesis system (nutas), and its first version is available at http://research.nii.ac.jp/~yoneda

Structural Decomposition of STGs

Specification of asynchronous circuit behaviour becomes more complex as the complexity of today’s System-On-a-Chip (SOC) design increases. This also causes the Signal Transition Graphs (STGs) – interpreted Petri nets for the specification of asynchronous circuit behaviour – to become bigger and more complex, which makes it more difficult, sometimes even impossible, to synthesize an asynchronous circuit from an STG with a tool like petrify [CKK+96] or CASCADE [BEW00]. It has, therefore, been suggested to decompose the STG as a first step; this leads to a modular implementation [KWVB03] [KVWB05], which can reduce syn- thesis effort by possibly avoiding state explosion or by allowing the use of library elements. A decomposition approach for STGs was presented in [VW02] [KKT93] [Chu87a]. The decomposition algorithm by Vogler and Wollowski [VW02] is based on that of Chu [Chu87a] but is much more generally applicable than the one in [KKT93] [Chu87a], and its correctness has been proved formally in [VW02]. This dissertation begins with Petri net background described in chapter 2. It starts with a class of Petri nets called a place/transition (P/T) nets. Then STGs, the subclass of P/T nets, is viewed. Background in net decomposition is presented in chapter 3. It begins with the structural decomposition of P/T nets for analysis purposes – liveness and boundedness of the net. Then STG decomposition for synthesis from [VW02] is described. The decomposition method from [VW02] still could be improved to deal with STGs from real applications and to give better decomposition results. Some improvements for [VW02] to improve decomposition result and increase algorithm efficiency are discussed in chapter 4. These improvement ideas are suggested in [KVWB04] and some of them are have been proved formally in [VK04]. The decomposition method from [VW02] is based on net reduction to find an output block component. A large amount of work has to be done to reduce an initial specification until the final component is found. This reduction is not always possible, which causes input initially classified as irrelevant to become relevant input for the component. But under certain conditions (e.g. if structural auto-conflicts turn out to be non-dynamic) some of them could be reclassified as irrelevant. If this is not done, the specifications become unnecessarily large, which intern leads to unnecessarily large implemented circuits. Instead of reduction, a new approach, presented in chapter 5, decomposes the original net into structural components first. An initial output block component is found by composing the structural components. Then, a final output block component is obtained by net reduction. As we cope with the structure of a net most of the time, it would be useful to have a structural abstraction of the net. A structural abstraction algorithm [Kan03] is presented in chapter 6. It can improve the performance in finding an output block component in most of the cases [War05] [Taw04]. Also, the structure net is in most cases smaller than the net itself. This increases the efficiency of the decomposition algorithm because it allows the transitions contained in a node of the structure graph to be contracted at the same time if the structure graph is used as internal representation of the net. Chapter 7 discusses the application of STG decomposition in asynchronous circuit design. Application to speed independent circuits is discussed first. Af- ter that 3D circuits synthesized from extended burst mode (XBM) specifications are discussed. An algorithm for translating STG specifications to XBM specifi- cations was first suggested by [BEW99]. This algorithm first derives the state machine from the STG specification, then translates the state machine to XBM specification. An XBM specification, though it is a state machine, allows some concurrency. These concurrencies can be translated directly, without deriving all of the possible states. An algorithm which directly translates STG to XBM specifications, is presented in chapter 7.3.1. Finally DESI, a tool to decompose STGs and its decomposition results are presented

Design And Synthesis Of Clockless Pipelines Based On Self-resetting Stage Logic

For decades, digital design has been primarily dominated by clocked circuits. With larger scales of integration made possible by improved semiconductor manufacturing techniques, relying on a clock signal to orchestrate logic operations across an entire chip became increasingly difficult. Motivated by this problem, designers are currently considering circuits which can operate without a clock. However, the wide acceptance of these circuits by the digital design community requires two ingredients: (i) a unified design methodology supported by widely available CAD tools, and (ii) a granularity of design techniques suitable for synthesizing large designs. Currently, there is no unified established design methodology to support the design and verification of these circuits. Moreover, the majority of clockless design techniques is conceived at circuit level, and is subsequently so fine-grain, that their application to large designs can have unacceptable area costs. Given these considerations, this dissertation presents a new clockless technique, called self-resetting stage logic (SRSL), in which the computation of a block is reset periodically from within the block itself. SRSL is used as a building block for three coarse-grain pipelining techniques: (i) Stage-controlled self-resetting stage logic (S-SRSL) Pipelines: In these pipelines, the control of the communication between stages is performed locally between each pair of stages. This communication is performed in a uni-directional manner in order to simplify its implementation. (ii) Pipeline-controlled self-resetting stage logic (P-SRSL) Pipelines: In these pipelines, the communication between each pair of stages in the pipeline is driven by the oscillation of the last pipeline stage. Their communication scheme is identical to the one used in S-SRSL pipelines. (iii) Delay-tolerant self-resetting stage logic (D-SRSL) Pipelines: While communication in these pipelines is local in nature in a manner similar to the one used in S-SRL pipelines, this communication is nevertheless extended in both directions. The result of this bi-directional approach is an increase in the capability of the pipeline to handle stages with random delay. Based on these pipelining techniques, a new design methodology is proposed to synthesize clockless designs. The synthesis problem consists of synthesizing an SRSL pipeline from a gate netlist with a minimum area overhead given a specified data rate. A two-phase heuristic algorithm is proposed to solve this problem. The goal of the algorithm is to pipeline a given datapath by minimizing the area occupied by inter-stage latches without violating any timing constraints. Experiments with this synthesis algorithm show that while P-SRSL pipelines can reach high throughputs in shallow pipelines, D-SRSL pipelines can achieve comparable throughputs in deeper pipelines