Leveraging Local Intra-Core Information to Increase Global Performance in Block-Based Design of Systems-on-Chip

Latency-insensitive design is a methodology for system-on-chip (SoC) design that simplifies the reuse of intellectual property cores and the implementation of the communication among them. This simplification is based on a system-level protocol that decouples the intra-core logic design from the design of the inter-core communication channels. Each core is encapsulated within a shell, a synthesized logic block that dynamically controls its operation to interface it with the rest of the SoC and to absorb any latency variations on its I/O signals. In particular, a shell stalls a core whenever new valid data are not available on the input channels or a down-link core has requested a delay in the data production on the output channels. We study how knowledge about the internal logic structure of a core can be applied to the design of its shell to improve the overall system-level performance by avoiding unnecessary local stalling. We introduce the notion of functional independence conditions (FIC) and present a novel circuit design of a generic shell template that can leverage FIC. We propose a procedure for the logic synthesis of a FIC-shell instance that is only based on the analysis of the intra-core logic and does not require any input from the designers. Finally, we present a comprehensive experimental analysis that shows the performance benefits and limited design overhead of the proposed technique. This includes the semi-custom design of an SoC, an ultra-wideband baseband transmitter, using a 90nm industrial standard cell library

On-Chip Transparent Wire Pipelining (invited paper)

Wire pipelining has been proposed as a viable mean to break the discrepancy between decreasing gate delays and increasing wire delays in deep-submicron technologies. Far from being a straightforwardly applicable technique, this methodology requires a number of design modifications in order to insert it seamlessly in the current design flow. In this paper we briefly survey the methods presented by other researchers in the field and then we thoroughly analyze the solutions we recently proposed, ranging from system-level wire pipelining to physical design aspects

Adaptive Latency Insensitive Protocols

Latency-insensitive design copes with excessive delays typical of global wires in current and future IC technologies. It achieves its goal via encapsulation of synchronous logic blocks in wrappers that communicate through a latency-insensitive protocol (LIP) and pipelined interconnects. Previously proposed solutions suffer from an excessive performance penalty in terms of throughput or from a lack of generality. This article presents an adaptive LIP that outperforms previous static implementations, as demonstrated by two relevant cases — a microprocessor and an MPEG encoder — whose components we made insensitive to the latencies of their interconnections through a newly developed wrapper. We also present an informal exposition of the theoretical basis of adaptive LIPs, as well as implementation detail

Indicating Asynchronous Array Multipliers

Multiplication is an important arithmetic operation that is frequently encountered in microprocessing and digital signal processing applications, and multiplication is physically realized using a multiplier. This paper discusses the physical implementation of many indicating asynchronous array multipliers, which are inherently elastic and modular and are robust to timing, process and parametric variations. We consider the physical realization of many indicating asynchronous array multipliers using a 32/28nm CMOS technology. The weak-indication array multipliers comprise strong-indication or weak-indication full adders, and strong-indication 2-input AND functions to realize the partial products. The multipliers were synthesized in a semi-custom ASIC design style using standard library cells including a custom-designed 2-input C-element. 4x4 and 8x8 multiplication operations were considered for the physical implementations. The 4-phase return-to-zero (RTZ) and the 4-phase return-to-one (RTO) handshake protocols were utilized for data communication, and the delay-insensitive dual-rail code was used for data encoding. Among several weak-indication array multipliers, a weak-indication array multiplier utilizing a biased weak-indication full adder and the strong-indication 2-input AND function is found to have reduced cycle time and power-cycle time product with respect to RTZ and RTO handshaking for 4x4 and 8x8 multiplications. Further, the 4-phase RTO handshaking is found to be preferable to the 4-phase RTZ handshaking for achieving enhanced optimizations of the design metrics.Comment: arXiv admin note: text overlap with arXiv:1903.0943

Asynchronous Early Output Dual-Bit Full Adders Based on Homogeneous and Heterogeneous Delay-Insensitive Data Encoding

This paper presents the designs of asynchronous early output dual-bit full adders without and with redundant logic (implicit) corresponding to homogeneous and heterogeneous delay-insensitive data encoding. For homogeneous delay-insensitive data encoding only dual-rail i.e. 1-of-2 code is used, and for heterogeneous delay-insensitive data encoding 1-of-2 and 1-of-4 codes are used. The 4-phase return-to-zero protocol is used for handshaking. To demonstrate the merits of the proposed dual-bit full adder designs, 32-bit ripple carry adders (RCAs) are constructed comprising dual-bit full adders. The proposed dual-bit full adders based 32-bit RCAs incorporating redundant logic feature reduced latency and area compared to their non-redundant counterparts with no accompanying power penalty. In comparison with the weakly indicating 32-bit RCA constructed using homogeneously encoded dual-bit full adders containing redundant logic, the early output 32-bit RCA comprising the proposed homogeneously encoded dual-bit full adders with redundant logic reports corresponding reductions in latency and area by 22.2% and 15.1% with no associated power penalty. On the other hand, the early output 32-bit RCA constructed using the proposed heterogeneously encoded dual-bit full adder which incorporates redundant logic reports respective decreases in latency and area than the weakly indicating 32-bit RCA that consists of heterogeneously encoded dual-bit full adders with redundant logic by 21.5% and 21.3% with nil power overhead. The simulation results obtained are based on a 32/28nm CMOS process technology

Throughput-driven floorplanning with wire pipelining

The size of future high-performance SoC is such that the time-of-flight of wires connecting distant pins in the layout can be much higher than the clock period. In order to keep the frequency as high as possible, the wires may be pipelined. However, the insertion of flip-flops may alter the throughput of the system due to the presence of loops in the logic netlist. In this paper, we address the problem of floorplanning a large design where long interconnects are pipelined by inserting the throughput in the cost function of a tool based on simulated annealing. The results obtained on a series of benchmarks are then validated using a simple router that breaks long interconnects by suitably placing flip-flops along the wires

Latency Optimized Asynchronous Early Output Ripple Carry Adder based on Delay-Insensitive Dual-Rail Data Encoding

Asynchronous circuits employing delay-insensitive codes for data representation i.e. encoding and following a 4-phase return-to-zero protocol for handshaking are generally robust. Depending upon whether a single delay-insensitive code or multiple delay-insensitive code(s) are used for data encoding, the encoding scheme is called homogeneous or heterogeneous delay-insensitive data encoding. This article proposes a new latency optimized early output asynchronous ripple carry adder (RCA) that utilizes single-bit asynchronous full adders (SAFAs) and dual-bit asynchronous full adders (DAFAs) which incorporate redundant logic and are based on the delay-insensitive dual-rail code i.e. homogeneous data encoding, and follow a 4-phase return-to-zero handshaking. Amongst various RCA, carry lookahead adder (CLA), and carry select adder (CSLA) designs, which are based on homogeneous or heterogeneous delay-insensitive data encodings which correspond to the weak-indication or the early output timing model, the proposed early output asynchronous RCA that incorporates SAFAs and DAFAs with redundant logic is found to result in reduced latency for a dual-operand addition operation. In particular, for a 32-bit asynchronous RCA, utilizing 15 stages of DAFAs and 2 stages of SAFAs leads to reduced latency. The theoretical worst-case latencies of the different asynchronous adders were calculated by taking into account the typical gate delays of a 32/28nm CMOS digital cell library, and a comparison is made with their practical worst-case latencies estimated. The theoretical and practical worst-case latencies show a close correlation....Comment: arXiv admin note: text overlap with arXiv:1704.0761