31 research outputs found
Discrete Wavelet Transforms
The discrete wavelet transform (DWT) algorithms have a firm position in processing of signals in several areas of research and industry. As DWT provides both octave-scale frequency and spatial timing of the analyzed signal, it is constantly used to solve and treat more and more advanced problems. The present book: Discrete Wavelet Transforms: Algorithms and Applications reviews the recent progress in discrete wavelet transform algorithms and applications. The book covers a wide range of methods (e.g. lifting, shift invariance, multi-scale analysis) for constructing DWTs. The book chapters are organized into four major parts. Part I describes the progress in hardware implementations of the DWT algorithms. Applications include multitone modulation for ADSL and equalization techniques, a scalable architecture for FPGA-implementation, lifting based algorithm for VLSI implementation, comparison between DWT and FFT based OFDM and modified SPIHT codec. Part II addresses image processing algorithms such as multiresolution approach for edge detection, low bit rate image compression, low complexity implementation of CQF wavelets and compression of multi-component images. Part III focuses watermaking DWT algorithms. Finally, Part IV describes shift invariant DWTs, DC lossless property, DWT based analysis and estimation of colored noise and an application of the wavelet Galerkin method. The chapters of the present book consist of both tutorial and highly advanced material. Therefore, the book is intended to be a reference text for graduate students and researchers to obtain state-of-the-art knowledge on specific applications
Filtered Multicarrier Transmission
Orthogonal frequency‐division multiplexing (OFDM) has been adopted as the waveform of choice in the existing and emerging broadband wireless communication systems for a number of advantages it can offer. Nevertheless, investigations of more advanced multicarrier transmission schemes have continued with the aim of eliminating or mitigating its essential limitations. This article discusses multicarrier schemes with enhanced spectrum localization, which manage to reduce the spectral sidelobes of plain OFDM that are problematic in various advanced communication scenarios. These include schemes for enhancing the OFDM waveform characteristics through additional signal processing as well as filter‐bank multicarrier (FBMC) waveforms utilizing frequency‐selective filter banks instead of plain (inverse) discrete Fourier transform processing for waveform generation and demodulation.acceptedVersionPeer reviewe
Microwave resonant sensors
Microwave resonant sensors use the spectral characterisation of a resonator to make high sensitivity measurements of material electromagnetic properties at GHz frequencies. They have been applied to a wide range of industrial and scientific measurements, and used to study a diversity of physical phenomena. Recently, a number of challenging dynamic applications have been developed that require very high speed and high performance, such as kinetic inductance detectors and scanning microwave microscopes. Others, such as sensors for miniaturised fluidic systems and non-invasive blood glucose sensors, also require low system cost and small footprint. This thesis investigates new and improved techniques for implementing microwave resonant sensor systems, aiming to enhance their suitability for such demanding tasks. This was achieved through several original contributions: new insights into coupling, dynamics, and statistical properties of sensors; a hardware implementation of a realtime multitone readout system; and the development of efficient signal processing algorithms for the extraction of sensor measurements from resonator response data. The performance of this improved sensor system was verified through a number of novel measurements, achieving a higher sampling rate than the best available technology yet with equivalent accuracy and precision. At the same time, these experiments revealed unforeseen applications in liquid metrology and precision microwave heating of miniature flow systems.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Microwave resonant sensors
Microwave resonant sensors use the spectral characterisation of a resonator to make high sensitivity measurements of material electromagnetic properties at GHz frequencies. They have been applied to a wide range of industrial and scientific measurements, and used to study a diversity of physical phenomena. Recently, a number of challenging dynamic applications have been developed that require very high speed and high performance, such as kinetic inductance detectors and scanning microwave microscopes. Others, such as sensors for miniaturised fluidic systems and non-invasive blood glucose sensors, also require low system cost and small footprint. This thesis investigates new and improved techniques for implementing microwave resonant sensor systems, aiming to enhance their suitability for such demanding tasks. This was achieved through several original contributions: new insights into coupling, dynamics, and statistical properties of sensors; a hardware implementation of a realtime multitone readout system; and the development of efficient signal processing algorithms for the extraction of sensor measurements from resonator response data. The performance of this improved sensor system was verified through a number of novel measurements, achieving a higher sampling rate than the best available technology yet with equivalent accuracy and precision. At the same time, these experiments revealed unforeseen applications in liquid metrology and precision microwave heating of miniature flow systems
Advanced Digital Signal Processing Techniques for High-Speed Optical Links
L'abstract è presente nell'allegato / the abstract is in the attachmen
Modeling and Linearization of MIMO RF Transmitters
Multiple-input multiple-output (MIMO) technology will continue to play a vital
role in next-generation wireless systems, e.g., the fifth-generation wireless networks
(5G). Large-scale antenna arrays (also called massive MIMO) seem to be the most
promising physical layer solution for meeting the ever-growing demand for high
spectral efficiency. Large-scale MIMO arrays are typically deployed with high
integration and using low-cost components. Hence, they are prone to different
hardware impairments such as crosstalk between the transmit antennas and power
amplifier (PA) nonlinearities, which distort the transmitted signal. To avert the
performance degradation due to these impairments, it is essential to have mechanisms
for predicting the output of the MIMO arrays. Such prediction mechanisms are
mandatory for performance evaluation and, more importantly, for the adoption of
proper compensation techniques such as digital predistortion (DPD) schemes. This
has stirred a considerable amount of interest among researchers to develop new
hardware and signal processing solutions to address the requirements of large-scale
MIMO systems.
In the context of MIMO systems, one particular problem is that the hardware
cost and complexity scale up with the increase of the size of the MIMO system.
As a result, the MIMO systems tend to be implemented on a chip and are very
compact. Reduction of the cost by reducing the bill of material is possible when
several components are eliminated. The reuse of already existing hardware is an
alternative solution. As a result, such systems are prone to excessive sources of
distortion, such as crosstalk. Accordingly, crosstalk in MIMO systems in its simplest
form can affect the DPD coefficient estimation scheme. In this thesis, the effect of
crosstalk on two main DPD estimation techniques, know as direct learning algorithm
(DLA) and indirect learning algorithm (ILA), is studied.
The PA behavioral modeling and DPD scheme face several challenges that seek
cost-efficient and flexible solutions too. These techniques require constant capture
of the PA output feedback signal, which ultimately requires the implementation
of a complete transmitter observation receiver (TOR) chain for the individual
transmit path. In this thesis, a technique to reuse the receiver path of the MIMO
TDD transceiver as a TOR is developed, which is based on over-the-air (OTA)
measurements. With these techniques, individual PA behavioral modeling and DPD
can be done by utilizing a few receivers of the MIMO TDD system. To use OTA
measurements, an on-site antenna calibration scheme is developed to individually
estimate the coupling between the transmitter and the receiver antennas.
Furthermore, a digital predistortion technique for compensating the nonlinearity
of several PAs in phased arrays is presented. The phased array can be a subset of
massive MIMO systems, and it uses several antennas to steer the transmitted signal
in a particular direction by appropriately assigning the magnitude and the phase
of the transmitted signal from each antenna. The particular structure of phased
arrays requires the linearization of several PAs with a single DPD. By increasing the
number of RF branches and consequently increasing the number of PAs in the phased
array, the linearization task becomes challenging. The DPD must be optimized to
results in the best overall linear performance of the phased array in the field. The
problem of optimized DPD for phased array has not been addressed appropriately in
the literature.
In this thesis, a DPD technique is developed based on an optimization problem
to address the linearization of PAs with high variations. The technique continuously
optimizes the DPD coefficients through several iterations considering the effect of
each PA simultaneously. Therefore, it results in the best optimized DPD performance
for several PAs.
Extensive analysis, simulations, and measurement evaluation is carried out as
a proof of concept. The different proposed techniques are compared with conventional approaches, and the results are presented. The techniques proposed in this
thesis enable cost-efficient and flexible signal processing approaches to facilitate the
development of future wireless communication systems