Stabilization of acoustic modes using Helmholtz and Quarter-Wave resonators tuned at exceptional points

Acoustic dampers are efficient and cost-effective means for suppressing thermoacoustic instabilities in combustion chambers. However, their design and the choice of their purging air mass flow is a challenging task, when one aims at ensuring thermoacoustic stability after their implementation. In the present experimental and theoretical study, Helmholtz (HH) and Quarter-Wave (QW) dampers are considered. A model for their acoustic impedance is derived and experimentally validated. In a second part, a thermoacoustic instability is mimicked by an electro-acoustic feedback loop in a rectangular cavity, to which the dampers are added. The length of the dampers can be adjusted, so that the system can be studied for tuned and detuned conditions. The stability of the coupled system is investigated experimentally and then analytically, which shows that for tuned dampers, the best stabilization is achieved at the exceptional point. The stabilization capabilities of HH and QW dampers are compared for given damper volume and purge mass flow.Comment: 34 pages, 19 figures, acepted in the Journal of Sound and Vibratio

Thermoacoustic-Piezoelectric Systems with Dynamic Magnifiers

Thermoacoustic energy conversion is an emergent technology with considerable potential for research, development, and innovation. In thermoacoustic resonators, self-excited acoustic oscillations are induced in a working gas by means of a temperature gradient across a porous body and vice versa with no need of moving parts. In the first part of this dissertation, thermoacoustic resonators are integrated with piezoelectric membranes to create a new class of energy harvesters. The incident acoustic waves impinge on a piezo-diaphragm located at one end of the thermoacoustic-piezoelectric (TAP) resonator to generate an electrical power output. The TAP design is enhanced by appending the resonator with an elastic structure aimed at enhancing the strain experienced by the piezo-element to magnify the electric energy produced for the same input acoustic power. An analytical approach to model the thermal, acoustical, mechanical and electrical domains of the developed harvester is introduced and optimized. The performance of the harvesters is compared with experimental data obtained from an in-house built prototype with similar dimensions. In an attempt to further understand the dynamics and transient behavior of the excited waves in the presence of piezoelectric coupling, a novel approach to compute and accurately predict critical temperature gradients that onset the acoustic waves is discussed. The developed model encompasses tools from electric circuit analogy of the lumped acoustical and mechanical components to unify the modeling domain. In the second part of the dissertation, piezo-driven thermoacoustic refrigerators (PDTARs) are presented. The PDTARs rely on the inverse thermoacoustic effect for their operation. A high amplitude pressure wave in a working medium is used to create a temperature gradient across the ends of a porous body located in an acoustic resonator. Finally, PDTARs with dynamic magnifiers are introduced. The developed design is shown, theoretically and experimentally, as capable of potentially enhancing the cooling effect of PDTARs by increasing the temperature gradient created across the porous body

Effects of errorless learning on the acquisition of velopharyngeal movement control

Session 1pSC - Speech Communication: Cross-Linguistic Studies of Speech Sound Learning of the Languages of Hong Kong (Poster Session)The implicit motor learning literature suggests a benefit for learning if errors are minimized during practice. This study investigated whether the same principle holds for learning velopharyngeal movement control. Normal speaking participants learned to produce hypernasal speech in either an errorless learning condition (in which the possibility for errors was limited) or an errorful learning condition (in which the possibility for errors was not limited). Nasality level of the participants’ speech was measured by nasometer and reflected by nasalance scores (in %). Errorless learners practiced producing hypernasal speech with a threshold nasalance score of 10% at the beginning, which gradually increased to a threshold of 50% at the end. The same set of threshold targets were presented to errorful learners but in a reversed order. Errors were defined by the proportion of speech with a nasalance score below the threshold. The results showed that, relative to errorful learners, errorless learners displayed fewer errors (50.7% vs. 17.7%) and a higher mean nasalance score (31.3% vs. 46.7%) during the acquisition phase. Furthermore, errorless learners outperformed errorful learners in both retention and novel transfer tests. Acknowledgment: Supported by The University of Hong Kong Strategic Research Theme for Sciences of Learning © 2012 Acoustical Society of Americapublished_or_final_versio

Piezoelectrically Driven Thermoacoustic Refrigerator

Thermoacoustic refrigeration is an emerging refrigeration technology which does not require any moving parts or harmful refrigerants in its operation. This technology uses acoustic waves to pump heat across a temperature gradient. The vast majority of thermoacoustic refrigerators to date have used electromagnetic loudspeakers to generate the acoustic input. In this thesis, the design, construction, operation, and modeling of a piezoelectrically-driven thermoacoustic refrigerator are detailed. This refrigerator demonstrates the effectiveness of piezoelectric actuation in moving 0.3 W of heat across an 18 degree C temperature difference with an input power of 7.6 W. The performance characteristics of this class of thermoacoustic-piezoelectric refrigerators are modeled by using DeltaEC software and the predictions are experimentally validated. The obtained results confirm the validity of the developed model. Furthermore, the potential of piezoelectric actuation as effective means for driving thermoacoustic refrigerators is demonstrated as compared to the conventional electromagnetic loudspeakers which are heavy and require high actuation energy. The developed theoretical and experimental tools can serve as invaluable means for the design and testing of other piezoelectrically-driven thermoacoustic refrigerator configurations