329 research outputs found
Low-power Physical-layer Design for LTE Based Very NarrowBand IoT (VNB - IoT) Communication
abstract: With the new age Internet of Things (IoT) revolution, there is a need to connect a wide range of devices with varying throughput and performance requirements. In this thesis, a wireless system is proposed which is targeted towards very low power, delay insensitive IoT applications with low throughput requirements. The low cost receivers for such devices will have very low complexity, consume very less power and hence will run for several years.
Long Term Evolution (LTE) is a standard developed and administered by 3rd Generation Partnership Project (3GPP) for high speed wireless communications for mobile devices. As a part of Release 13, another standard called narrowband IoT (NB-IoT) was introduced by 3GPP to serve the needs of IoT applications with low throughput requirements. Working along similar lines, this thesis proposes yet another LTE based solution called very narrowband IoT (VNB-IoT), which further reduces the complexity and power consumption of the user equipment (UE) while maintaining the base station (BS) architecture as defined in NB-IoT.
In the downlink operation, the transmitter of the proposed system uses the NB-IoT resource block with each subcarrier modulated with data symbols intended for a different user. On the receiver side, each UE locks to a particular subcarrier frequency instead of the entire resource block and operates as a single carrier receiver. On the uplink, the system uses a single-tone transmission as specified in the NB-IoT standard.
Performance of the proposed system is analyzed in an additive white Gaussian noise (AWGN) channel followed by an analysis of the inter carrier interference (ICI). Relationship between the overall filter bandwidth and ICI is established towards the end.Dissertation/ThesisMasters Thesis Electrical Engineering 201
Architectures and Key Technical Challenges for 5G Systems Incorporating Satellites
Satellite Communication systems are a promising solution to extend and
complement terrestrial networks in unserved or under-served areas. This aspect
is reflected by recent commercial and standardisation endeavours. In
particular, 3GPP recently initiated a Study Item for New Radio-based, i.e., 5G,
Non-Terrestrial Networks aimed at deploying satellite systems either as a
stand-alone solution or as an integration to terrestrial networks in mobile
broadband and machine-type communication scenarios. However, typical satellite
channel impairments, as large path losses, delays, and Doppler shifts, pose
severe challenges to the realisation of a satellite-based NR network. In this
paper, based on the architecture options currently being discussed in the
standardisation fora, we discuss and assess the impact of the satellite channel
characteristics on the physical and Medium Access Control layers, both in terms
of transmitted waveforms and procedures for enhanced Mobile BroadBand (eMBB)
and NarrowBand-Internet of Things (NB-IoT) applications. The proposed analysis
shows that the main technical challenges are related to the PHY/MAC procedures,
in particular Random Access (RA), Timing Advance (TA), and Hybrid Automatic
Repeat reQuest (HARQ) and, depending on the considered service and
architecture, different solutions are proposed.Comment: Submitted to Transactions on Vehicular Technologies, April 201
Clock Error Impact on NB-IoT Radio Link Performance
3GPP has recently addressed the improvements in Random Access Network (RAN) and specified some new technologies such as enhanced Machine Type Communication (eMTC) and Narrow Band – Internet of Things (NB-IoT) in its release 13 which is also known as LTE-Advanced Pro. These new technologies are addressed mainly to focus on development and deployment of cellular IoT services. NB-IoT is less complex and easily deployable through software upgradation and is compatible to legacy cellular networks such as GSM and 4G which makes it a suitable candidate for IoT. NB-IoT will greatly support LPWAN, thus, it can be deployed for Smart cities and other fields such as smart electricity, smart agriculture, smart health services and smart homes. The NB-IoT targets for low cost device, low power consumption, relaxed delay sensitivity and easy deployment which will greatly support above mentioned fields.
This thesis work studies the clock error impact on the radio link performance for up-link transmission on the NB-IoT testbed based on Cloud-RAN using Software Defined Radios (SDR) on a LTE protocol stack. The external clock error is introduced to the network and performance issues are analyzed in the radio link. The analysis indicates packet drops up to 51% in the radio link through the study of received power, packet loss, retransmissions, BLER and SINR for different MCS index. The major performance issues depicted by the analysis are packet loss up to 51% and retransmission of packets up to 128 times for lower SINR and high clock errors. Also, clock errors produce CFO up to 1.25 ppm which results in bad synchronization between UE and eNodeB
Understanding the limits of LoRaWAN
The quick proliferation of LPWAN networks, being LoRaWAN one of the most
adopted, raised the interest of the industry, network operators and facilitated
the development of novel services based on large scale and simple network
structures. LoRaWAN brings the desired ubiquitous connectivity to enable most
of the outdoor IoT applications and its growth and quick adoption are real
proofs of that. Yet the technology has some limitations that need to be
understood in order to avoid over-use of the technology. In this article we aim
to provide an impartial overview of what are the limitations of such
technology, and in a comprehensive manner bring use case examples to show where
the limits are
- …